1194398 Phoenix Contact Electrical Wires & Cables

Product Details

• Design
  Generation 4
• Note on the connection method
  Crimp connection, cannot be disconnected
• Conductor length
  2 m (AC cables)
• Type of charging current
  DC, AC 1-phase
• Number of power contacts
  5 (L1, N, PE, DC+, DC-)
• Cable structure
  4 x 0.5 mm²
• Maximum voltage for locking detection
  12 V
• Reverse current of the motor
  max. 1.5 A
• Tolerance at the sensor with the recommended measured current
  ±5K
• ECLASS 9.0
  27144706
• Type
  Locking actuator top
• Note
  A protective cap is supplied as standard for the DC and AC contacts.
• Ambient temperature (storage/transport)
  -40 °C ... 85 °C
• Number of phases
  1
• Rated current for signal contacts
  2 A
• Insulation resistance of neighboring contacts
  > 200 MΩ
• Temperature monitoring
  AC contacts: PTC chain (DIN˽EN˽60738-1)
• Mounting hole diameter
  6.80 mm (ø)
• Restrictions to mounting position
  Only 0 to 90 degree frontal inclination possible, see figure
• Required mounting screws
  M6
Material
Plastic
Cable resistance
≤ 37.1 Ω/km
Single wire, color
black PP/CS
Typical motor current for locking
0.25 A
Pause time after entry or exit path
3 s
Type of sensor
Pt 1000
ECLASS 10.0.1
27144706
Charging standard
CCS type 1
Ambient temperature (operation)
-40 °C ... 80 °C
Maximum charging power
125 kW
Number of signal contacts
2 (CP, CS)
Temperature measurement
DC contacts: 2x PT1000 (DIN EN 60751)
Insertion force
< 100 N
Housing color
black
Flammability rating
V0
Outer sheath, material
PVC
Cable weight
7 kg/km
Possible power supply range at the motor
9 V ... 16 V
Max. dwell time with reverse current
1 s
Mechanical emergency release
available
Temperature range
-40 °C ... 130 °C
Application
For charging with alternating current (AC) and with direct current (DC)
Charging mode
Mode 2, 3, 4
Width
108 mm
Max. altitude
4000 m (above sea level)
Degree of protection
IP55 (plugged in; when plugged in and ready to operate, the degree of protection is only ensued if both plug-in components are original products from Phoenix Contact or suitable standard-compliant products)
Rated voltage for power contacts
250 V AC
Type of signal transmission
Pulse width modulation with modulated Powerline communication according to ISO/IEC 15118 / DIN SPEC 70121
Resistor coding
2.7 kΩ (between PE and CS)
Insertion/withdrawal cycles
> 10000
Mounting position of the locking actuator
Top center
Design line
Generation 4
Material surface of contacts
Ag
Locking type
Locking in the inserted state with a locking mechanism
Minimum bending radius
15 mm
External sheath, color
Green-yellow
Operating voltage
12 V (Typical power supply at the motor)
Cable length
1 m
Recommended measured current
≤ 1 mA (Umax= 16 V DC)
ECLASS 11.0
27144706
Standards/regulations
DIN EN 60751
Height
151.2 mm
Depth
122.8 mm
Bore dimensions
117.6 mm x 90 mm, 117.6 mm x 83 mm
Rated current of power contacts
48 A AC
Rated voltage for signal contacts
30 V AC
Withdrawal force
< 100 N
Screws included in the scope of delivery
none
Customer variations
On request
External cable diameter
1.6 mm -0.2 mm
Number of positions of theconnectors
4
Recommended adaptation time
600 ms
Lock recognition
available
Service life insertion cycles
> 10000 load cycles
Resistance range
650 Ω ... 1450 Ω