1199811 Phoenix Contact Programmable Logic Controllers

Product Details

• Depth
  71.5 mm
• Air pressure (operation)
  80 kPa ... 106 kPa (up to 2000 m above sea level)
• Designation
  Main circuit supply (UM)
• Conductor cross section AWG max.
  16
• Type of protection
  Bus protected up to 250 V AC, maximum
• Note on weight specifications
  with connectors
• Power consumption
  3.5 W (The amount of power dissipation is heavily dependent on the bus activity, which is only influenced by the terminal itself to a limited extent. The maximum power dissipation is reached when other devices occupy the DALI bus with minimum pauses and t
• Note on dimensions
  Housing dimensions
• Degree of protection
  IP20
• Conductor cross section solid min.
  0.2 mm²
• Stripping length
  8 mm
• Current carrying capacity
  max. 220 mA (Bus load)
• Supply voltage range
  19.2 V DC ... 30 V DC (including all tolerances, including ripple)
• Immunity to burst
  Noise immunity test in accordance with EN 61000-6-2 Fast transients (burst) EN 61000-4-4/IEC 61000-4-4 Criterion B, 2 kV
• ECLASS 10.0.1
  27242608
• Height
  120 mm
• Permissible humidity (operation)
  10 % ... 95 % (according to DIN EN 61131-2)
• Ambient temperature (storage/transport)
  -25 °C ... 85 °C
• Conductor cross section flexible min.
  0.08 mm²
• Output current with short-circuit
  max. 250 mA
Net weight
180 g
Current consumption
max. 230 mA
Immunity to conducted interference
Noise immunity test in accordance with EN 61000-6-2 Conducted interference EN 61000-4-6/IEC 61000-4-6 Criterion A, Test voltage 10 V
Ambient temperature (operation)
-25 °C ... 55 °C
Air pressure (storage/transport)
70 kPa ... 106 kPa (up to 3000 m above sea level)
Conductor cross section solid max.
1.5 mm²
Conductor cross section flexible max.
1.5 mm²
Supply voltage
24 V DC (via voltage jumper)
Mounting type
DIN rail
Test section
7.5 V supply (bus logic)/24 V supply (I/O), and functional ground (FE) 500 V AC 50 Hz 1 min.
Immunity to surge
Noise immunity test in accordance with EN 61000-6-2 Transient overvoltage (surge) EN 61000-4-5/IEC 61000-4-5 Criterion B, supply lines DC: ±0.5 kV/±0.5 kV (symmetric/asymmetric), ±1 kV on unshielded I/O cables
Protection class
III (IEC 61140, EN 61140, VDE 0140-1)
Width
48.8 mm
Permissible humidity (storage/transport)
10 % ... 95 % (according to DIN EN 61131-2)
Connection method
Inline connector
Conductor cross section AWG min.
24
Transmission speed
1200 bps
Diagnostics messages
Yes No I/O error; DALI-specific error at application level
Immunity to EF
Noise immunity test in accordance with EN 61000-6-2 Electromagnetic fields EN 61000-4-3/IEC 61000-4-3 Criterion A, Field intensity: 10 V/m
Immunity to ESD
Noise immunity test in accordance with EN 61000-6-2 Electrostatic discharge (ESD) EN 61000-4-2/IEC 61000-4-2 Criterion B, 6 kV contact discharge, 8 kV air discharge
ECLASS 9.0
27242608
ECLASS 11.0
27242608
Interference emission
Noise emission test according to EN 61000-6-3 Class B