1218392 Phoenix Contact Electrical Safety Devices

Product Details

• ECLASS 9.0
  27371819
• Ambient temperature (operation)
  -40 °C ... 55 °C (observe derating)
• Rated control supply current IS
  typ. 84 mA
• Number of inputs
  1
• Max. permissible overall conductor resistance
  150 Ω
• Contact material
  AgSnO2
• Contact type
  3 enabling current paths
• Switching frequency
  0.5 Hz
• Mechanical service life
  10x 106 cycles
• Typical response time at US
  < 175 ms (automatic start)
• Mounting position
  vertical or horizontal
• Housing material
  PBT
• Conductor cross section solid
  0.2 mm² ... 2.5 mm²
• Safety Integrity Level (SIL)
  3
• Safety Integrity Level Claim Limit (SIL CL)
  3
• Shock
  15g
• Utilization restriction
  EMC: class A product, see manufacturer's declaration in the download area
• Ambient temperature (storage/transport)
  -40 °C ... 85 °C
• Maximum altitude
  ≤ 2000 m (Above sea level)
• Power consumption at US
  typ. 2 W
Description of the input
non-safety-related
Input voltage range "1" signal
20.4 V DC ... 26.4 V DC
Protective circuit/component
Suppressor diode
Limiting continuous current
6 A (For 13/14)
Sq. Total current
72 A2 (observe derating)
Output fuse
6 A gL/gG (N/O contact)
Typical pickup time at US
< 250 ms (when controlled via A1)
Typical release time at US
< 20 ms (when controlled via A1 or S12 and S22.)
Mounting type
DIN rail mounting
Status display
3 x green LED
Conductor cross-section AWG
24 ... 12
Stripping length
7 mm
Rated insulation voltage
250 V AC
Vibration (operation)
10 Hz ... 150 Hz, 2g
Width
12.5 mm
Max. permissible relative humidity (operation)
75 % (on average, 85% infrequently, non-condensing)
Rated control circuit supply voltage US
24 V DC -15 % / +10 %
Filter time
max. 1.5 ms (at S12, S22; test pulse width)
Input current range "0" signal
0 mA ... 2 mA (for safe Off; at S12)
Number of outputs
1 (digital, PNP)
Switching capacity
min. 60 mW
Maximum inrush current
500 mA (Δt = 1 ms at Us)
Relay type
Electromechanical relay with force-guided contacts in accordance with IEC/EN 61810-3
Min. degree of protection of inst. location
IP54
Operating voltage display
1 x green LED
Screw thread
M3
Performance level (PL)
e (4 A DC13; 5 A AC15; 8760 switching cycles/year)
Standards/regulations
DIN EN 50178
ECLASS 10.0.1
27371819
Depth
114.5 mm
Max. permissible humidity (storage/transport)
75 % (on average, 85% infrequently, non-condensing)
Protective circuit
Surge protection Suppressor diode
Current consumption
< 10 mA (at S34/24 V)
Output description
non-safety-related
Current
max. 100 mA
Recovery time
< 500 ms
Net weight
144.92 g
Degree of protection
IP20
Connection method
Screw connection
pluggable
Yes
Stop category
0
Category
4
Degree of pollution
2
Conformance
CE-compliant
Environmental simulation test
ISA-S71.04 (G3)
Height
112.2 mm
Designation
Air clearances and creepage distances between the power circuits
Inrush current
min. 3 mA
Input name
Start circuit
Input voltage range "0" signal
0 V DC ... 5 V DC (for safe Off; at S12)
Output name
Enabling current paths
Switching voltage
min. 12 V AC/DC
Voltage
22 V DC (Us - 2 V)
Short-circuit protection
no
Nominal operating mode
100% operating factor
Assembly instructions
See derating curve
Housing color
yellow
Conductor cross section flexible
0.2 mm² ... 2.5 mm²
Torque
0.6 Nm
Rated surge voltage/insulation
Basic insulation 4 kV:Between input circuit and enabling current path (23/24/34)Between all current paths and housingSafe isolation, reinforced insulation 6 kV:Between input circuit and enabling current path (13/14)Between enabling current path (13/14) an
Overvoltage category
III
ECLASS 11.0
27371819