1413036 Phoenix Contact Terminal Blocks

Product Details

• Color
  gray
• Min. AWG conductor cross section, flexible
  24
• Conductor cross section flexible, with ferrule with plastic sleeve min.
  0.25 mm²
• Conductor cross section flexible, with ferrule without plastic sleeve min.
  0.25 mm²
• Cross section with insertion bridge, stranded max.
  2.5 mm²
• Conductor cross section solid min.
  0.2 mm²
• Conductor cross section flexible max.
  2.5 mm²
• Cross section with insertion bridge, solid max.
  2.5 mm²
• Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
  0.5 mm²
• ECLASS 5.0
  27141100
• ECLASS 7.0
  27141120
• UNSPSC 7.0901
  39121410
• Overvoltage category
  III
• Conductor cross section flexible, with ferrule with plastic sleeve max.
  1.5 mm²
• Ambient temperature (storage/transport)
  -25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
• ECLASS 4.1
  27141100
• ETIM 3.0
  EC000897
• 2 conductors with same cross section, stranded max.
  1.5 mm²
• Ambient temperature (actuation)
  -5 °C ... 70 °C
• ETIM 4.0
  EC000897
UNSPSC 19.0
39121410
REACh SVHC
Lead 7439-92-1
ECLASS 10.0.1
27141120
ECLASS 9.0
27141120
2 conductors with same cross section, solid max.
1 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 125°C)
ETIM 7.0
EC000897
UNSPSC 13.2
39121410
UNSPSC 21.0
39121410
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
1 mm²
UNSPSC 12.01
39121410
Conductor cross section flexible min.
0.2 mm²
UNSPSC 18.0
39121410
Result of surge voltage test
Test passed
Result of power-frequency withstand voltage test
Test passed
Tight fit on carrier
NS 15
Result of temperature-rise test
Test passed
Relative insulation material temperature index (Elec., UL 746 B)
125 °C
Nominal voltage UN
500 V
Back of the hand protection
guaranteed
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Length
28 mm
Bending test turns
135
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Tractive force setpoint
60 N
Requirements, voltage drop
U1 ≤ 3.2 mV; U2 ≤ 1.5 x U1
Result of thermal test
Test passed
Connection
1 level
Conductor cross section solid max.
4 mm²
Max. AWG conductor cross section, flexible
14
Screw thread
M3
Finger protection
guaranteed
Result of tight fit on support
Test passed
Setpoint
1 N
Short circuit stability result
Test passed
Proof of thermal characteristics (needle flame) effective duration
30 s
Height NS 15
32 mm
Conductor cross section tensile test
4 mm²
Surge voltage test setpoint
7.2 kV
Result of flexion and pull-out test
Test passed
Bending test rotation speed
10 rpm
Short-time current
0.48 kA
Width
5.2 mm
Connection method
Screw connection
Connection in acc. with standard
IEC 60947-7-1
Conductor cross section short circuit testing
4 mm²
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
125 °C
Potentials
1
Flammability rating according to UL 94
V2
Degree of pollution
3
Nominal current IN
24 A
Power frequency withstand voltage setpoint
1.89 kV
Bending test conductor cross section/weight
0.2 mm² / 0.2 kg
End cover width
1 mm
Tightening torque, min
0.6 Nm
Number of levels
1
Rated surge voltage
6 kV
Maximum power dissipation for nominal condition
0.77 W
ECLASS 11.0
27141120
ECLASS 6.0
27141100
ETIM 6.0
EC000897
UNSPSC 11
39121410
UNSPSC 20.0
39121410
Result of voltage-drop test
Test passed
Tightening torque max
0.8 Nm
2 conductors with same cross section, solid min.
0.2 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum
0.25 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum
1.5 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
China RoHS
Environmentally Friendly Use Period = 50 years
Nominal cross section
2.5 mm²
Maximum load current
32 A (with 4 mm² conductor cross section)
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Conductor cross section flexible, with ferrule without plastic sleeve max.
2.5 mm²
2 conductors with same cross section, stranded min.
0.2 mm²
Internal cylindrical gage
A3
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 5.1
27141100
ETIM 2.0
EC000897
UNSPSC 6.01
30211811
Insulating material
PA
Stripping length
8 mm
Conductor cross section AWG max.
12
Conductor cross section AWG min.
24
ECLASS 4.0
27141100
Number of connections
2
Insulating material group
I
Open side panel
Yes
Tensile test result
Test passed