Bryan Obida

Live support:

Monday - Friday 6AM - 6PM PST

1529768 Phoenix Contact Electrical Connectors

Phoenix Contact 1529768 Bus system flush-type female connector, INTERBUS, 5-pos., M12, shielded, B-coded, front/screw mounting with M16 thread, can be positioned, with 2 m bus line
Phoenix Contact

Part#:1529768

Manufacturer:Phoenix Contact

Product Lifecycle:Active

Get a quick Quote!

Bus system flush-type female connector, INTERBUS, 5-pos., M12, shielded, B-coded, front/screw mounting with M16 thread, can be positioned, with 2 m bus line

About the manufacturer: Phoenix Contact is one of the manufacturers that offers Electrical Connectors that you can order at marketplace.quotebeam.com. Phoenix Contact manufactures industrial electrical and electronic technology products that offer power, protection, connectivity, and automation for systems and equipment.

Check out the 1529768 Phoenix Contact price in the box on the right side or send a quick quote.

Product Details

  • Note
    The electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences ari
  • Insulation resistance
    ≥ 5 GΩ*km
  • Standards/regulations
    M12 connector IEC 61076-2-101
  • Insertion/withdrawal cycles
    > 100
  • Material, knurls
    Nickel-plated brass
  • Cable structure
    3 x 2 x 0.22 mm²
  • Wire colors
    Green-yellow, white-brown, gray-pink
  • Shielding
    Braided copper wires
  • Ambient temperature (operation)
    -40 °C ... 80 °C (cable, fixed installation)
  • Number of positions
    5
  • Degree of pollution
    3
  • Status display
    No
  • Contact carrier material
    PA 6.6
  • Safety note
    WARNING: The connectors may not be plugged in or disconnected under load. Ignoring the warning or improper use may damage persons and/or property.
  • Conductor structure signal line
    32x 0.10 mm
  • Minimum bending radius, flexible installation
    15 x D
  • Traversing path
    10 m
  • Outer sheath, material
    PUR
  • Attenuation
    ≤ 15 dB/km (at 256 kHz)
  • Test voltage Core/Shield
    1000 Vrms
  • China RoHS
    Environmentally Friendly Use Period = 50 years
  • ECLASS 4.1
    27140800
  • ECLASS 9.0
    27060311
  • ETIM 6.0
    EC001855
  • UNSPSC 19.0
    31251501
  • Degree of protection
    IP67
  • Rated voltage
    48 V AC
  • Signal type/category
    INTERBUS
  • Flammability rating according to UL 94
    V0
  • Standards/specifications
    M12 connector IEC 61076-2-101
  • AWG signal line
    24
  • Overall twist
    3 pairs to the core
  • Minimum bending radius, fixed installation
    7.5 x D
  • Traversing rate
    1.6 m/s
  • Conductor material
    Bare Cu litz wires
  • Signal speed
    0.66 c
  • Test voltage Core/Core
    1500 Vrms
  • ECLASS 11.0
    27060311
  • ECLASS 6.0
    27279200
  • ETIM 7.0
    EC001855
  • UNSPSC 7.0901
    31251501
  • UNSPSC 21.0
    31251501
  • Length of cable
    2 m
  • Rated surge voltage
    1.5 kV
  • Overvoltage category
    II
  • Torque
    3 Nm ... 4 Nm (Installation-side)
  • Sealing material
    NBR
  • Cable type (abbreviation)
    900
  • Twisted pairs
    2 cores to the pair
  • External cable diameter D
    8 mm
  • Cable weight
    70 kg/km
  • Loop resistance
    ≤ 159.80 Ω/km
  • Near end crosstalk attenuation (NEXT)
    ≥ 61 dB (at 772 kHz)
  • Flame resistance
    according to VDE 0472, Part 4, test type B
  • ECLASS 10.0.1
    27060311
  • ECLASS 5.1
    27143400
  • ETIM 4.0
    EC000830
  • UNSPSC 11
    31251501
  • UNSPSC 20.0
    31251501
  • Rated current at 40°C
    4 A (Plug/socket in accordance with IEC 61076-2-101, cable technical data is to be observed)
  • Coding
    B - inverse
  • Test voltage
    2500 V
  • Contact material
    CuZn
  • Contact surface material
    Ni/Au
  • Cable type
    INTERBUS
  • Conductor cross section
    3x 2x 0.22 mm²
  • External sheath, color
    may green RAL 6017
  • Bending radius
    120 mm
  • Material conductor insulation
    PE
  • Wave impedance
    120 Ω ±20 % (at 64 kHz)
  • Coupling resistance
    < 250.00 mΩ/m (at 30 MHz)
  • Shielded
    yes
  • ECLASS 4.0
    27140800
  • ECLASS 7.0
    27279218
  • UNSPSC 6.01
    31251501
  • UNSPSC 12.01
    31251501
  • Number of bending cycles
    5000000
  • Acceleration
    3.2 m/s²
  • Cable capacity
    ≤ 60 nF/km (At 800 Hz)
  • Nominal voltage, cable
    250 V (Peak value, not for high-power applications)
  • REACh SVHC
    Lead 7439-92-1
  • ECLASS 5.0
    27143400
  • ETIM 2.0
    EC001297
  • ETIM 3.0
    EC002061
  • UNSPSC 13.2
    39121413

Product condition

ORIGINAL PACKAGING

SURPLUS ORIGINAL PACKAGING - 100% unused and in original packaging


1-year warranty

Get a quick Quote!

Request a quote, and we will send you price and availability within minutes.

Select Qty:

Average response time: 11 minutes

By purchasing this item, you agree to the Terms & Conditions

Quotebeam is NOT an authorized distributor of Phoenix Contact

Shipping and Delivery Worldwide

calculate costs and time


Secure Payment Processing

with money back guarantee


1 year warranty

on all parts


Responsive Customer Support

we're here to help!

Need more details?

Feel free to chat with us or check our FAQ

Phoenix Contact Disclaimer:

The product is unused surplus. Quotebeam is not an authorized surplus dealer or affiliate for the Manufacturer of this product. Products may feature older date codes or be from an earlier series than what is currently available from the manufacturer or authorized dealers. Because Quotebeam is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Phoenix Contact Controls products will have firmware already installed, Quotebeam makes no representation as to whether a Controls product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Quotebeam also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Phoenix Contact, its distributors, or any other source. Quotebeam also makes no representations as to your right to install any such firmware on the product. Quotebeam will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Relevant products

Do you have questions?

We’re here for you ✨

We are a proud member of:

Association for High Technology Distribution LogoAssociation for Advancing Automation LogoThe International Society of Automation Logo