1534494 Phoenix Contact Data & Networking Devices
Part#:1534494
Manufacturer:Phoenix Contact
Product Lifecycle:Active
Get a quick Quote!
Bus system flush-type socket, DeviceNet/CANopen, 5-pos., M12, shielded, A-coded, rear/screw mounting with M16 thread, with 5 m bus cable, 2 x 0.2 mm², 2 x 0.32 mm²
About the manufacturer: Phoenix Contact is one of the manufacturers that offers Data & Networking Devices that you can order at marketplace.quotebeam.com. Phoenix Contact manufactures industrial electrical and electronic technology products that offer power, protection, connectivity, and automation for systems and equipment.
Check out the 1534494 Phoenix Contact price in the box on the right side or send a quick quote.
Product Details
- Signal type/category CANopen®
- Rated current at 40°C 4 A (Plug/socket in accordance with IEC 61076-2-101, cable technical data is to be observed)
- Degree of pollution 3
- Contact material CuZn
- Cable type CANopen®/DeviceNet™, PUR, violet
- Ambient temperature (operation) -40 °C ... 80 °C (cable, fixed installation)
- China RoHS Environmentally Friendly Use Period = 50 years
- UNSPSC 18.0 39121413
- Number of positions 5
- ECLASS 6.0 27279200
- ETIM 2.0 EC001297
- UNSPSC 6.01 31251501
- Status display No
- Acceleration 3 m/s²
- Outer sheath, material PUR
- Wave impedance 120 Ω ±10 % (with 1 MHz)
- Standards/regulations M12 connector IEC 61076-2-101
- Traversing path 4.5 m
- Cable weight 90 kg/km
- Other resistance Low adhesion
- REACh SVHC Lead 7439-92-1
- ECLASS 5.1 27143400
- ETIM 6.0 EC002061
- UNSPSC 13.2 39121413
- Cable capacity nom. 40 nF/km (Data cable)
- UNSPSC 20.0 39121413
- Degree of protection IP67 (When plugged in)
- Rated voltage 48 V AC
- Flammability rating according to UL 94 V0
- Standards/specifications M12 connector IEC 61076-2-101
- Number of bending cycles 5000000
- Conductor material Tin-plated Cu litz wires
- Test voltage Core/Core 2000 V (50 Hz, 1 min.)
- Ambient temperature (storage/transport) -40 °C ... 80 °C
- ECLASS 10.0.1 27440102
- ETIM 4.0 EC000830
- UNSPSC 12.01 31251501
- Length of cable 5 m
- Overvoltage category II
- Traversing rate 3 m/s
- Insulation resistance ≥ 5 GΩ*km (Data cable)
- ECLASS 4.1 27140800
- Note The electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences ari
- Rated surge voltage 1.5 kV
- Material conductor insulation Foamed PE (Data cable)
- Attenuation ≤ 22.9 dB/km (with 1 MHz)
- Halogen-free in accordance with DIN VDE 0472 part 815
- ECLASS 11.0 27440102
- ECLASS 7.0 27440103
- UNSPSC 19.0 39121413
- Flame resistance UL 1581, Sec. 1060 (FT-1)
- ECLASS 5.0 27143400
- UNSPSC 7.0901 31251501
- Optical shield covering 80 %
- Minimum bending radius, flexible installation 10 x D
- Minimum bending radius, drag chain applications 10 x D
- Loop resistance ≤ 181.80 Ω/km (Data cable)
- Nominal voltage, cable ≤ 300 V (Peak value, not for high-power applications)
- Test voltage Core/Shield 2000 V (50 Hz, 1 min.)
- Coding A - standard
- Torque 2 Nm ... 3 Nm (Installation-side)
- Sealing material FKM
- Cable type (abbreviation) 920
- Safety note WARNING: The connectors may not be plugged in or disconnected under load. Ignoring the warning or improper use may damage persons and/or property.
- UL AWM style 21198 (80°C/300 V)
- Conductor structure signal line 19x 0.13 mm
- Bending radius 70 mm
- Conductor cross section 2x 0.25 mm² (Data cable)
- Core diameter including insulation 1.95 mm ±0.05 mm (Data cable)
- Twisted pairs 2 cores to the pair
- External cable diameter D 6.7 mm ±0.3 mm
- Shielded yes
- ECLASS 4.0 27140800
- UNSPSC 11 31251501
- Shielding Tinned copper braided shield
- Minimum bending radius, fixed installation 5 x D
- Test voltage 2500 V
- Contact carrier material PA 6.6
- Cable structure 2xAWG24/19+2xAWG22/19
- Type of pair shielding Plastic-coated aluminum foil, aluminum side outside
- Overall twist 2 pairs around a drain wire in the center to the core
- ETIM 3.0 EC002061
- Insertion/withdrawal cycles > 100
- Contact surface material Ni/Au
- Material, knurls Nickel-plated brass
- Wire colors Red-black, blue-white
- UNSPSC 21.0 39121413
- Conductor structure, voltage supply 19x 0.15 mm
- External sheath, color violet RAL 4001
- ECLASS 9.0 27440102
- AWG signal line 24
- AWG power supply 22
Product condition
ORIGINAL PACKAGING
SURPLUS ORIGINAL PACKAGING - 100% unused and in original packaging
1-year warranty
Get a quick Quote!
Request a quote, and we will send you price and availability within minutes.
Select Qty:
Average response time: 11 minutes
By purchasing this item, you agree to the Terms & Conditions
Quotebeam is NOT an authorized distributor of Phoenix Contact
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Phoenix Contact Disclaimer:
The product is unused surplus. Quotebeam is not an authorized surplus dealer or affiliate for the Manufacturer of this product. Products may feature older date codes or be from an earlier series than what is currently available from the manufacturer or authorized dealers. Because Quotebeam is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Phoenix Contact Controls products will have firmware already installed, Quotebeam makes no representation as to whether a Controls product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Quotebeam also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Phoenix Contact, its distributors, or any other source. Quotebeam also makes no representations as to your right to install any such firmware on the product. Quotebeam will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Relevant products
Do you have questions?
We’re here for you ✨
We are a proud member of:
