1713711 Phoenix Contact Electrical Connectors

Product Details

• Number of connections
  2
• Rated voltage (III/2)
  1000 V
• Rated surge voltage (III/2)
  8 kV
• Conductor cross section flexible
  16 mm² ... 50 mm²
• 2 conductors with same cross section, solid
  6 mm² ... 16 mm²
• Contact material
  Al alloy
• Housing color
  gray (7042)
• Minimum clearance - inhomogeneous field (III/2)
  8 mm
• Connection in acc. with standard
  IEC 60947-7-1
• Acceleration
  5 g (60.1 - 150 Hz)
• ECLASS 10.0.1
  27141134
• ECLASS 7.0
  27141134
• Number of positions
  1
• Maximum load current
  150 A (with 50 mm² conductor cross section)
• Range of articles
  UWV 50
• Nominal current
  150 A
• Rated voltage (II/2)
  1000 V
• Single-conductor/terminal point multi-stranded
  16 mm² ... 50 mm²
• 2 conductors with same cross section, flexible, with ferrule without plastic sleeve
  6 mm² ... 16 mm²
• 2 conductors with the same cross section, flexible, with TWIN ferrule with plastic sleeve
  6 mm² ... 10 mm²
Flammability rating according to UL 94
V0
Temperature for the ball pressure test according to EN 60695-10-2
125 °C
Pieces per package
20
Type of note
Notes on safety
Pull-out test
IEC 60947-7-1:2009-04
Conductor cross section
50 mm²
Minimum clearance - inhomogeneous field (III/3)
8 mm
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Sweep speed
1 octave/min
Temperature
960 °C
ECLASS 6.0
27141100
Pitch
18.8 mm
Nom. voltage
800 V
Rated surge voltage (II/2)
6 kV
2 conductors with same cross section, flexible
10 mm² ... 16 mm²
Internal cylindrical gage
A10 / B10
Note
The cable entry funnel is not touch-proof. Never connect or disconnect the terminal when it is energized. Take appropriate steps to ensure touch proofness.
CTI according to IEC 60112
600
Glow wire flammability index GWFI according to EN 60695-2-12
850
Caption
Type: UWV 50/S
Denomination packing units
Pcs.
Test for conductor damage and slackening
IEC 60947-7-1:2009-04
Test specification
IEC 60947-7-1
Clearances and creepage distances
IEC 60947-1:2007-06 + A1:2010-12
Minimum creepage distance value (III/2)
8 mm
Safety note
• Only electrically qualified personnel may install and operate the product.To recognize and prevent danger, the qualified personnel must be familiar with the basics of electrical engineering.
Time of exposure
30 s
ECLASS 5.1
27141100
ETIM 6.0
EC001283
Brief article description
Panel feed-through terminal block
Number of potentials
1
Rated voltage (III/3)
800 V
Connection method
Screw connection with tension sleeve
Conductor cross section flexible, with ferrule without plastic sleeve
10 mm² ... 50 mm²
Torque
6 Nm ... 8 Nm
Insulating material
PA
Glow wire ignition temperature GWIT according to EN 60695-2-13
775
Plate thickness
1 mm ... 4 mm
Ambient temperature (assembly)
-5 °C ... 100 °C
Ambient temperature (storage/transport)
-40 °C ... 70 °C
Conductor cross section / conductor type / tensile force
16 mm² / stranded / > 100 N
Minimum creepage distance value (III/3)
10 mm
Minimum creepage distance value (II/2)
5.5 mm
Test duration per axis
2.5 h
ECLASS 5.0
27141100
ECLASS 9.0
27141134
Rated surge voltage (III/3)
8 kV
Connection direction of the conductor to plug-in direction
0 °
Conductor cross section, flexible, with ferrule, with plastic sleeve
10 mm² ... 50 mm²
Stripping length
24 mm
Surface characteristics
tin-plated
Insulating material group
I
Width [ w ]
18.8 mm
Type of packaging
packed in cardboard
Ambient temperature (operation)
-40 °C ... 100 °C (Depending on the current carrying capacity/derating curve)
Rated current
150 A
Specification
IEC 60695-2-11:2014-02
Minimum clearance - inhomogeneous field (II/2)
5.5 mm
Frequency
10 - 150 - 10 Hz
Amplitude
0.35 mm (10 - 60.1 Hz)
ECLASS 11.0
27141134
ETIM 7.0
EC001283