1923047 Phoenix Contact Terminal Blocks

Product Details

• Height NS 35/7,5
  47 mm
• Screw thread
  M3
• Smoke gas toxicity NFPA 130 (SMP 800C)
  passed
• Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum
  0.25 mm²
• Stripping length
  8 mm
• Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
  0.5 mm²
• ECLASS 6.0
  27141100
• Relative insulation material temperature index (Elec., UL 746 B)
  130 °C
• Max. AWG conductor cross section, flexible
  12
• Permissible humidity (storage/transport)
  30 % ... 70 %
• ECLASS 10.0.1
  27141120
• ECLASS 4.1
  27141100
• ETIM 3.0
  EC000897
• UNSPSC 6.01
  30211811
• UNSPSC 11
  39121410
• UNSPSC 21.0
  39121410
• Proof of thermal characteristics (needle flame) effective duration
  30 s
• Cross section with insertion bridge, solid max.
  4 mm²
• Ambient temperature (assembly)
  -5 °C ... 70 °C
• ECLASS 4.0
  27141100
ECLASS 9.0
27141120
ETIM 7.0
EC000897
UNSPSC 18.0
39121410
UNSPSC 7.0901
39121410
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 7.0
27141120
UNSPSC 13.2
39121410
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Tractive force setpoint
60 N
Result of voltage-drop test
Test passed
ASD level
6.12 (m/s2)2/Hz
ETIM 4.0
EC000897
UNSPSC 12.01
39121410
UNSPSC 19.0
39121410
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Power frequency withstand voltage setpoint
1.89 kV
Conductor cross section tensile test
4 mm²
Result of temperature-rise test
Test passed
Test spectrum
Service life test category 2, bogie-mounted
Acceleration
30g
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Length
50.5 mm
Height NS 32
52 mm
Conductor cross section AWG max.
10
Conductor cross section flexible max.
4 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
4 mm²
2 conductors with same cross section, solid max.
1.5 mm²
ECLASS 5.0
27141100
ECLASS 5.1
27141100
Potentials
1
Maximum power dissipation for nominal condition
1.02 W (the value is multiplied when connecting multiple levels)
Result of power-frequency withstand voltage test
Test passed
Bending test turns
135
Result of tight fit on support
Test passed
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2018-05
Number of shocks per direction
3
Static insulating material application in cold
-60 °C
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Connection
1 level
Tightening torque, min
0.6 Nm
Conductor cross section AWG min.
30
Conductor cross section flexible min.
0.2 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.25 mm²
China RoHS
Environmentally Friendly Use Period = 50 years
Bending test rotation speed
10 (+/- 2) rpm
Tensile test result
Test passed
Tight fit on carrier
NS 32/NS 35
Requirements, voltage drop
U1 ≤ 3,2 mVU2 ≤ 1,5 x U1dT ≤ 45 K
Conductor cross section short circuit testing
4000000 mm²
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Shock form
Half-sine
Surface flammability NFPA 130 (ASTM E 162)
passed
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Width
6.2 mm
End cover width
2 mm
Tightening torque max
0.8 Nm
Conductor cross section solid max.
4 mm²
Min. AWG conductor cross section, flexible
24
Conductor cross section flexible, with ferrule with plastic sleeve max.
2.5 mm²
2 conductors with same cross section, stranded min.
0.2 mm²
ECLASS 11.0
27141120
ETIM 2.0
EC000897
ETIM 6.0
EC000897
UNSPSC 20.0
39121410
Open side panel
Yes
Result of flexion and pull-out test
Test passed
Bending test conductor cross section/weight
0.2 mm² / 0.2 kg
Setpoint
1 N
Short circuit stability result
Test passed
Short-time current
0.00048 kA
Ageing test for screwless modular terminal block temperature cycles
192
Test duration per axis
5 h
Test directions
X-, Y- and Z-axis (pos. and neg.)
Shock duration
18 ms
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Height NS 35/15
54.5 mm
Connection in acc. with standard
CSA
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.25 mm²
Cross section with insertion bridge, stranded max.
4 mm²
2 conductors with same cross section, stranded max.
1.5 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 125°C)
Number of levels
2
Insulating material
PA
Overvoltage category
III
Finger protection
guaranteed
2 conductors with same cross section, solid min.
0.2 mm²
Nominal voltage UN
500 V (With tightened clamping screws)
Nominal current IN
32 A (with 4 mm² conductor cross section)
Nominal cross section
4 mm²
Insulating material group
I
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum
1.5 mm²
Rated surge voltage
6 kV
Back of the hand protection
guaranteed
Conductor cross section solid min.
0.2 mm²
Color
blue
Result of surge voltage test
Test passed
Result of thermal test
Test passed
Flammability rating according to UL 94
V2
Connection method
Screw connection
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
Number of connections
3
Degree of pollution
3
Maximum load current
32 A (in case of a 4 mm² conductor cross section, the maximum load current must not be exceeded by the total current of all connected conductors.)
Surge voltage test setpoint
7.2 kV
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
1.5 mm²