2313423 Phoenix Contact Data & Networking Devices
Part#:2313423
Manufacturer:Phoenix Contact
Product Lifecycle:Active
Get a quick Quote!
Modular repeater for electrical isolation and increasing the range for DeviceNet/SDS/CANopen, data rate of up to 1 Mbps. High-quality electrical isolation between the interfaces, DIN-rail mountable, 24 V DC supply.
About the manufacturer: Phoenix Contact is one of the manufacturers that offers Data & Networking Devices that you can order at marketplace.quotebeam.com. Phoenix Contact manufactures industrial electrical and electronic technology products that offer power, protection, connectivity, and automation for systems and equipment.
Check out the 2313423 Phoenix Contact price in the box on the right side or send a quick quote.
Product Details
- Ambient temperature (operation) -20 °C ... 60 °C
- Degree of protection IP20
- Bit distortion, output < 6.25 %
- Mounting type DIN rail mounting
- Operating mode Semi-duplex
- Minimum switching voltage 10 V DC
- Identification DNV GL
- Test result 15g, 11 ms period, half-sine shock pulse
- ECLASS 5.0 27242700
- ETIM 3.0 EC000698
- ETIM 4.0 EC001423
- Type of test Shock in acc. with EN 60068-2-27/IEC 60068-2-27
- Standards/regulations DIN EN 50178, DIN EN 60950
- Ambient temperature (storage/transport) -40 °C ... 85 °C
- ETIM 7.0 EC001423
- Noise immunity EN 61000-6-2
- UNSPSC 7.0901 39121008
- Electrical isolation according to EN 60950
- Transmission medium 2-wire twisted pair, shielded
- Designation Air clearances and creepage distances
- Maximum switching voltage 30 V DC
- Additional text Please follow the special installation instructions in the documentation!
- Comments Criterion B
- Depth 121 mm
- Height 111 mm
- Bit distortion, input ± 35 %
- ECLASS 7.0 27242208
- Color green
- Nominal supply voltage 24 V DC
- Interface 1 CAN interface, in accordance with ISO/IS 11898 for DeviceNet, CAN, CANopen
- Width 35 mm
- MTTF 1091 Years (SN 29500 standard, temperature 25°C, operating cycle 21%)
- Connection method COMBICON plug-in screw terminal block
- No. of ports 2 (CAN_High / CAN_Low)
- Contact type N/O contact
- ECLASS 9.0 27242208
- Electromagnetic compatibility Conformance with EMC Directive 2014/30/EU
- UNSPSC 6.01 30211506
- UNSPSC 20.0 39122114
- Permissible humidity (operation) 30 % ... 95 % (non-condensing)
- Bit delay One telegram length (EXTENDED)
- Limiting continuous current 500 mA
- Temperature B
- Humidity A
- Noise emission EN 55011
- Net weight 233.466 g
- Max. current consumption 80 mA
- Status and diagnostic indicators LEDs: VCC (supply voltage), NET A (Mod/Net status port A), NET B (Mod/Net status port B), ACT (activity/data traffic)
- Utilization restriction EMC: class A product, see manufacturer's declaration in the download area
- Transmission method CSMA/CA
- Conductor cross section solid min. 0.2 mm²
- Conductor cross section AWG min. 24
- Termination resistor 124 Ω (Integrated and ready to be switched)
- Interface 2 CAN interface, in accordance with ISO/IS 11898 for DeviceNet, CAN, CANopen
- Test voltage data interface/power supply 1.5 kVrms (50 Hz, 1 min.)
- Altitude ≤ 5000 m (For restrictions, see the manufacturer's declaration for altitude operation)
- Conductor cross section AWG max. 14
- File format/coding Bit stuffing, NRZ
- Transmission length ≤ 5000 m (Dependent on the data rate and the protocol used)
- Conductor cross section flexible max. 2.5 mm²
- Number of bus devices ≤ 64 (per potential segment)
- Conductor cross section solid max. 2.5 mm²
- Output name Relay output
- Transmission speed ≤ 1 Mbps (Configurable via DIP switches)
- China RoHS Environmentally Friendly Use Period = 50 years
- ECLASS 5.1 27242700
- Enclosure Required protection according to the Rules shall be provided upon installation on board
- Number of outputs 1
- REACh SVHC Lead 7439-92-1
- Frequency range 80 MHz ... 3 GHz
- EMC B
- ECLASS 4.0 27240400
- ECLASS 10.0.1 27242208
- ECLASS 11.0 27242208
- Vibration A
- Free from substances that could impair the application of coating according to P-VW 3.10.7 57 65 0 VW-AUDI-Seat central standard
- Typical current consumption 55 mA (24 V DC)
- Supply voltage range 10 V DC ... 30 V DC (via pluggable COMBICON screw terminal block)
- UNSPSC 21.0 39122114
- Housing material PA 6.6-FR
- UNSPSC 19.0 39122114
- MTBF 823 Years (Telcordia standard, 25°C temperature, 21% operating cycle (5 days a week, 8 hours a day))
- UNSPSC 18.0 39122114
- Signal ± 1 kV
- ECLASS 4.1 27240400
- UNSPSC 13.2 39122114
- ETIM 6.0 EC001423
- Conductor cross section flexible min. 0.2 mm²
- Contact discharge ± 6 kV
- UNSPSC 11 39121008
- UNSPSC 12.01 39121008
- ECLASS 6.0 27242200
Product condition
ORIGINAL PACKAGING
SURPLUS ORIGINAL PACKAGING - 100% unused and in original packaging
1-year warranty
Get a quick Quote!
Request a quote, and we will send you price and availability within minutes.
Select Qty:
Average response time: 11 minutes
By purchasing this item, you agree to the Terms & Conditions
Quotebeam is NOT an authorized distributor of Phoenix Contact
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Phoenix Contact Disclaimer:
The product is unused surplus. Quotebeam is not an authorized surplus dealer or affiliate for the Manufacturer of this product. Products may feature older date codes or be from an earlier series than what is currently available from the manufacturer or authorized dealers. Because Quotebeam is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Phoenix Contact Controls products will have firmware already installed, Quotebeam makes no representation as to whether a Controls product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Quotebeam also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Phoenix Contact, its distributors, or any other source. Quotebeam also makes no representations as to your right to install any such firmware on the product. Quotebeam will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Relevant products
Do you have questions?
We’re here for you ✨
We are a proud member of:
