2700499 Phoenix Contact Electrical Safety Devices
Part#:2700499
Manufacturer:Phoenix Contact
Product Lifecycle:Active
In-stock parts: 10
Dec 22, 2024
Safety relay for emergency stop and safety doors up to SIL 3, SILCL 3, Cat. 4, PL e, 1 or 2-channel operation, automatic or manual, monitored start, cross-circuit detection, 2 enabling current paths, US = 24 V DC, pluggable Push-in terminal block
About the manufacturer: Phoenix Contact is one of the manufacturers that offers Electrical Safety Devices that you can order at marketplace.quotebeam.com. Phoenix Contact manufactures industrial electrical and electronic technology products that offer power, protection, connectivity, and automation for systems and equipment.
Check out the 2700499 Phoenix Contact price in the box on the right side or send a quick quote.
Product Details
- Depth 114.5 mm
- Width 12.5 mm
- Designation Air clearances and creepage distances between the power circuits
- Filter time max. 1.5 ms (at S12, S22; test pulse width)
- Input current range "0" signal 0 mA ... 2 mA (for safe Off; at S12)
- Input voltage range "1" signal 20.4 V DC ... 26.4 V DC
- Contact material AgSnO2
- Number of outputs 1 (digital, PNP)
- Mechanical service life 10x 106 cycles
- Recovery time < 500 ms
- Mounting type DIN rail mounting
- Status display 3 x green LED
- pluggable Yes
- Safety Integrity Level (SIL) 3
- Performance level (PL) e (4 A DC13; 5 A AC15; 8760 switching cycles/year)
- Overvoltage category III
- ECLASS 5.0 27371900
- UNSPSC 18.0 39122205
- Height 116.6 mm
- Rated control circuit supply voltage US 24 V DC -15 % / +10 %
- Power consumption at US typ. 1.56 W
- Description of the input non-safety-related
- Current consumption < 10 mA (at S34/24 V)
- Protective circuit/component Suppressor diode
- Limiting continuous current 6 A (observe derating)
- Voltage 22 V DC (Us - 2 V)
- Short-circuit protection no
- Relay type Electromechanical relay with force-guided contacts in accordance with IEC/EN 61810-3
- Net weight 155.6 g
- Assembly instructions See derating curve
- Housing color yellow
- Conductor cross-section flexible with ferrule without plastic sleeve 0.25 mm² ... 1.5 mm² (only together with CRIMPFOX 6)
- China RoHS Environmentally Friendly Use Period = 50 years
- ECLASS 5.1 27371900
- UNSPSC 13.2 39121501
- Ambient temperature (storage/transport) -40 °C ... 85 °C
- Ambient temperature (operation) -40 °C ... 55 °C (observe derating)
- Input name Start circuit
- Max. permissible overall conductor resistance 150 Ω
- Contact type 2 enabling current paths
- Switching capacity min. 60 mW
- Output fuse 6 A gL/gG (N/O contact)
- Typical release time at US < 20 ms (when controlled via A1 or S12 and S22.)
- Housing material PBT
- Conductor cross section solid 0.2 mm² ... 1.5 mm²
- Stop category 0
- Standards/regulations DIN EN 50178
- Rated surge voltage/insulation Safe isolation, reinforced insulation 6 kV between input circuit and enabling current path (13/14) and enabling current path (23/24)Basic insulation 4 kV between all current paths and housing
- Shock 15g
- ECLASS 11.0 27371819
- ECLASS 6.0 27371800
- ETIM 7.0 EC001449
- ETIM 6.0 EC001449
- Utilization restriction EMC: class A product, see manufacturer's declaration in the download area
- Max. permissible relative humidity (operation) 75 % (on average, 85% infrequently, non-condensing)
- Max. permissible humidity (storage/transport) 75 % (on average, 85% infrequently, non-condensing)
- Inrush current min. 3 mA
- Input voltage range "0" signal 0 V DC ... 5 V DC (for safe Off; at S12)
- Output name Enabling current paths
- Number of inputs 1
- Sq. Total current 72 A2 (observe derating)
- Current max. 100 mA
- Typical pickup time at US < 250 ms (when controlled via A1)
- Typical response time at US < 175 ms (automatic start)
- Min. degree of protection of inst. location IP54
- Operating voltage display 1 x green LED
- Conductor cross-section AWG 24 ... 16
- Stripping length 8 mm
- Safety Integrity Level Claim Limit (SIL CL) 3
- Degree of pollution 2
- ECLASS 10.0.1 27371819
- ECLASS 4.1 40020600
- ECLASS 7.0 27371819
- UNSPSC 20.0 39122205
- Maximum altitude ≤ 2000 m (Above sea level)
- Rated control supply current IS typ. 65 mA
- Protective circuit Surge protection Suppressor diode
- Output description non-safety-related
- Switching voltage min. 12 V AC/DC
- Switching frequency 0.5 Hz
- Maximum inrush current 500 mA (Δt = 1 ms at Us)
- Nominal operating mode 100% operating factor
- Mounting position vertical or horizontal
- Degree of protection IP20
- Connection method Push-in connection
- Conductor cross section flexible 0.2 mm² ... 1.5 mm²
- Conductor cross-section flexible with ferrule and plastic sleeve 0.25 mm² ... 1.5 mm² (only together with CRIMPFOX 6)
- Category 4
- Rated insulation voltage 250 V AC
- Vibration (operation) 10 Hz ... 150 Hz, 2g
- REACh SVHC Lead 7439-92-1
- ECLASS 4.0 40020600
- ECLASS 9.0 27371819
- UNSPSC 19.0 39122205
- UNSPSC 21.0 39122205
Product condition
ORIGINAL PACKAGING
SURPLUS ORIGINAL PACKAGING - 100% unused and in original packaging
This item can ship within 5 days!
1-year warranty
$218.74
Stock:
10
Select Qty:
$218.74
$218.74 each
By purchasing this item, you agree to the Terms & Conditions
Quotebeam is NOT an authorized distributor of Phoenix Contact
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Phoenix Contact Disclaimer:
The product is unused surplus. Quotebeam is not an authorized surplus dealer or affiliate for the Manufacturer of this product. Products may feature older date codes or be from an earlier series than what is currently available from the manufacturer or authorized dealers. Because Quotebeam is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Phoenix Contact Controls products will have firmware already installed, Quotebeam makes no representation as to whether a Controls product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Quotebeam also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Phoenix Contact, its distributors, or any other source. Quotebeam also makes no representations as to your right to install any such firmware on the product. Quotebeam will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Relevant products
Do you have questions?
We’re here for you ✨
We are a proud member of:
