2701531 Phoenix Contact Programmable Logic Controllers
Part#:2701531
Manufacturer:Phoenix Contact
Product Lifecycle:Active
Get a quick Quote!
Axioline E-EtherCAT® device in a metal housing with 8 IO-Link ports and 4 digital inputs, 24 V DC, M12 fast connection technology
About the manufacturer: Phoenix Contact is one of the manufacturers that offers Programmable Logic Controllers that you can order at marketplace.quotebeam.com. Phoenix Contact manufactures industrial electrical and electronic technology products that offer power, protection, connectivity, and automation for systems and equipment.
Check out the 2701531 Phoenix Contact price in the box on the right side or send a quick quote.
Product Details
- Number 2
- Number of outputs max. 8
- Switching rate 1 per second, maximum (at nominal inductive load)
- Air pressure (operation) 70 kPa ... 106 kPa (up to 3000 m above sea level)
- Net weight 726.9 g
- Mounting type Wall mounting or DIN rail mounting; both with mounting plate.
- Housing material Zinc die-cast
- Designation Actuators (UA)
- Nominal load, inductive 3.6 VA (0.8 H, 160 Ω, at nominal load)
- Immunity to ESD Noise immunity test in accordance with EN 61000-6-2 Electrostatic discharge (ESD) EN 61000-4-2/IEC 61000-4-2 Criterion B, 6 kV contact discharge, 8 kV air discharge
- Immunity to burst Noise immunity test in accordance with EN 61000-6-2 Fast transients (burst) EN 61000-4-4/IEC 61000-4-4 Criterion B, 2 kV
- ECLASS 4.0 27240400
- ECLASS 5.0 27242200
- ETIM 4.0 EC001599
- Type of addressing Auto-increment addressing
- Nominal output voltage 24 V DC
- Maximum output current per device 1.2 A
- Output current when switched off max. 300 µA
- Protection class III (IEC 61140, EN 61140, VDE 0140-1)
- ECLASS 10.0.1 27242604
- Permissible humidity (operation) 5 % ... 95 %
- ECLASS 4.1 27240400
- ETIM 2.0 EC001433
- Connection method M12 connector, X01 ... X04 have double occupancy
- ETIM 6.0 EC001599
- UNSPSC 13.2 32151602
- ECLASS 7.0 27242604
- ETIM 7.0 EC001599
- Degree of protection IP65/IP67
- Transmission speed 100 Mbps (with auto negotiation)
- Signal delay max. 150 µs (when switched on)
- Output voltage when switched off max. 1 V
- Test section 24 V supply (communications power and sensor supply, IO-Link ports)/bus connection (Ethernet 1) 500 V AC 50 Hz 1 min.
- Immunity to surge Noise immunity test in accordance with EN 61000-6-2 Transient overvoltage (surge) EN 61000-4-5/IEC 61000-4-5 Criterion B, DC supply lines: ±0.5 kV/±0.5 kV (symmetrical/asymmetrical)
- China RoHS Environmentally Friendly Use Period = 25;
- Maximum output current per channel 150 mA
- Nominal load, ohmic 3.6 W (160 Ω, at nominal load)
- Limitation of the voltage induced on circuit interruption -15 V DC
- Immunity to EF Noise immunity test in accordance with EN 61000-6-2 Electromagnetic fields EN 61000-4-3/IEC 61000-4-3 Criterion A, Field intensity: 10 V/m
- Immunity to conducted interference Noise immunity test in accordance with EN 61000-6-2 Conducted interference EN 61000-4-6/IEC 61000-4-6 Criterion A, Test voltage 10 V
- ECLASS 11.0 27242604
- ECLASS 6.0 27242600
- ECLASS 9.0 27242604
- UNSPSC 6.01 43172015
- UNSPSC 11 39121311
- UNSPSC 20.0 32151602
- Mechanical tests Vibration resistance in acc. with EN 60068-2-6/IEC 60068-2-6 5g
- ETIM 3.0 EC001599
- UNSPSC 12.01 39121311
- Width 60 mm
- Ambient temperature (storage/transport) -25 °C ... 85 °C
- Note on the connection method D-coded
- System-specific protocols Mailbox protocols CANopen® over EtherCAT®
- Specification ETG.1000 V1.02
- Depth 38 mm
- Designation connection point Copper cable
- Current consumption typ. 28 mA ±15 % (at 24 V DC)
- Connection technology 3-conductor
- Input frequency 0.5 kHz
- Input voltage range "0" signal -0.3 V DC ... 5 V DC
- Drill hole spacing 198.5 mm
- Permissible humidity (storage/transport) 5 % ... 95 %
- Supply voltage 24 V DC
- Protective circuit Overload protection, short-circuit protection of sensor supply
- Sensor current per channel max. 200 mA (from L+/L-)
- Output description IO-Link ports in digital output (DO) mode
- Note on dimensions The height is 194.5 mm including the mounting plate. With fixing clips pulled out, the height is 212 mm. The depth is 38 mm including the mounting plate (30.5 mm without the mounting plate).
- Air pressure (storage/transport) 70 kPa ... 106 kPa (up to 3000 m above sea level)
- Nominal input current typ. 3 mA
- ECLASS 5.1 27242600
- Height 185 mm
- Ambient temperature (operation) -25 °C ... 60 °C
- Supply voltage range 18 V DC ... 31.2 V DC (including all tolerances, including ripple)
- Type of protection Overload protection
- Interference emission Noise emission test as per EN 61000-6-4 Class A
- Nominal input voltage UIN 24 V DC
- Input voltage range "1" signal 15 V DC ... 30 V DC
- Behavior with overload Shutdown with automatic restart
- UNSPSC 7.0901 43201404
- UNSPSC 21.0 32151602
- Number of inputs max. 8 (EN 61131-2 type 1)
- Number of positions 4
- Equipment type EtherCAT® slave
- Description of the input IO-Link ports in digital input (DI) mode
- Input filter time < 1000 µs
- Nominal input current at UIN typ. 3 mA
- Input name Digital inputs at pin 2 for type A ports
- UNSPSC 18.0 32151602
- Total sensor current max. 1.6 A (from L+/L-)
- UNSPSC 19.0 32151602
Product condition
ORIGINAL PACKAGING
SURPLUS ORIGINAL PACKAGING - 100% unused and in original packaging
1-year warranty
Get a quick Quote!
Request a quote, and we will send you price and availability within minutes.
Select Qty:
Average response time: 11 minutes
By purchasing this item, you agree to the Terms & Conditions
Quotebeam is NOT an authorized distributor of Phoenix Contact
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Phoenix Contact Disclaimer:
The product is unused surplus. Quotebeam is not an authorized surplus dealer or affiliate for the Manufacturer of this product. Products may feature older date codes or be from an earlier series than what is currently available from the manufacturer or authorized dealers. Because Quotebeam is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Phoenix Contact Controls products will have firmware already installed, Quotebeam makes no representation as to whether a Controls product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Quotebeam also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Phoenix Contact, its distributors, or any other source. Quotebeam also makes no representations as to your right to install any such firmware on the product. Quotebeam will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Relevant products
Do you have questions?
We’re here for you ✨
We are a proud member of:
