2701538 Phoenix Contact Programmable Logic Controllers

Product Details

• Width
  60 mm
• Note on dimensions
  The height is 194.5 mm including the mounting plate. With fixing clips pulled out, the height is 212 mm. The depth is 38 mm including the mounting plate (30.5 mm without the mounting plate).
• Utilization restriction
  EMC: class A product, see manufacturer's declaration in the download area
• Ambient temperature (storage/transport)
  -25 °C ... 85 °C
• Current consumption
  typ. 3 mA ±15 % (at 24 V DC)
• Protective circuit
  Overload protection, short-circuit protection of sensor supply
• Nominal input current at UIN
  typ. 3 mA
• Interference emission
  Noise emission test as per EN 61000-6-4 Class A
• REACh SVHC
  Lead 7439-92-1
• ECLASS 4.0
  27240400
• Air pressure (operation)
  70 kPa ... 106 kPa (up to 3000 m above sea level)
• Connection method
  M12 connector, double occupancy
• Mounting type
  Wall mounting or DIN rail mounting; both with mounting plate.
• Equipment type
  Modbus slave (server)
• ETIM 3.0
  EC001599
• ETIM 6.0
  EC001599
• UNSPSC 20.0
  32151602
• Drill hole spacing
  198.5 mm
• Air pressure (storage/transport)
  70 kPa ... 106 kPa (up to 3000 m above sea level)
• Housing material
  Zinc die-cast
Note on the connection method
D-coded
Input name
Digital inputs
Number of inputs
16
Cable length
max. 30 m (To the sensor)
Immunity to ESD
Noise immunity test in accordance with EN 61000-6-2 Electrostatic discharge (ESD) EN 61000-4-2/IEC 61000-4-2 Criterion B, 6 kV contact discharge, 8 kV air discharge
Height
185 mm
Permissible humidity (operation)
5 % ... 95 %
Permissible humidity (storage/transport)
5 % ... 95 %
Net weight
702.2 g
Transmission speed
10/100 Mbps (with auto negotiation)
Specification
Modbus application protocol V1.1b
Connection technology
4-conductor
Nominal input voltage UIN
24 V DC
Immunity to EF
Noise immunity test in accordance with EN 61000-6-2 Electromagnetic fields EN 61000-4-3/IEC 61000-4-3 Criterion A, Field intensity: 10 V/m
Depth
38 mm
Degree of protection
IP65/IP67
Number
2
System-specific protocols
Modbus protocols Modbus/TCP
Number of positions
4
Description of the input
EN 61131-2 types 1 and 3
Supply voltage range
18 V DC ... 31.2 V DC (including all tolerances, including ripple)
Test section
24 V supply (communications power and sensor supply, digital inputs)/bus connection (Ethernet 1) 500 V AC 50 Hz 1 min.
Designation
Actuators (UA) for additional devices
Protocols supported
SNMP v1
Supply voltage
24 V DC
Input voltage range "0" signal
0 V ... 5 V DC
Input filter time
< 1000 µs
Input voltage range "1" signal
11 V DC ... 30 V DC
China RoHS
Environmentally Friendly Use Period = 25;
ECLASS 6.0
27242600
ETIM 2.0
EC001433
UNSPSC 7.0901
43201404
UNSPSC 18.0
32151602
UNSPSC 19.0
32151602
Ambient temperature (operation)
-25 °C ... 60 °C
Designation connection point
Copper cable
Immunity to surge
Noise immunity test in accordance with EN 61000-6-2 Transient overvoltage (surge) EN 61000-4-5/IEC 61000-4-5 Criterion B, DC supply lines: ±0.5 kV/±0.5 kV (symmetrical/asymmetrical)
Protection class
III (IEC 61140, EN 61140, VDE 0140-1)
ECLASS 10.0.1
27242604
ECLASS 9.0
27242604
UNSPSC 12.01
39121311
UNSPSC 21.0
32151602
Mechanical tests
Vibration resistance in acc. with EN 60068-2-6/IEC 60068-2-6 5g
ECLASS 4.1
27240400
UNSPSC 6.01
43172015
UNSPSC 11
39121311
ECLASS 7.0
27242604
Immunity to conducted interference
Noise immunity test in accordance with EN 61000-6-2 Conducted interference EN 61000-4-6/IEC 61000-4-6 Criterion A, Test voltage 10 V
ECLASS 11.0
27242604
ECLASS 5.1
27242600
ETIM 4.0
EC001599
UNSPSC 13.2
32151602
Immunity to burst
Noise immunity test in accordance with EN 61000-6-2 Fast transients (burst) EN 61000-4-4/IEC 61000-4-4 Criterion B, 2 kV
ECLASS 5.0
27242200
ETIM 7.0
EC001599