2701541 Phoenix Contact Programmable Logic Controllers

Product Details

• Width
  60 mm
• Nominal load, ohmic
  3.6 W (160 Ω, at nominal load)
• Limitation of the voltage induced on circuit interruption
  -15 V DC
• Interference emission
  Noise emission test as per EN 61000-6-4 Class A
• ECLASS 6.0
  27242600
• UNSPSC 6.01
  43172015
• Protection
  max. 8 A (polarity reversal protection up to 5 A)
• Connection technology
  3-conductor
• UNSPSC 13.2
  32151602
• UNSPSC 20.0
  32151602
• Total sensor current
  max. 1.6 A (from L+/L-)
• Type of protection
  Overload protection
• Ambient temperature (operation)
  -25 °C ... 60 °C
• Input voltage range "1" signal
  15 V DC ... 30 V DC
• Sensor current per channel
  max. 200 mA (from L+/L-)
• Nominal output voltage
  24 V DC
• Signal delay
  max. 150 µs (when switched on)
• Supply voltage
  24 V DC
• Output current when switched off
  max. 300 µA
• Immunity to burst
  Noise immunity test in accordance with EN 61000-6-2 Fast transients (burst) EN 61000-4-4/IEC 61000-4-4 Criterion B, 2 kV
ECLASS 9.0
27242604
ETIM 6.0
EC001599
UNSPSC 12.01
39121311
UNSPSC 21.0
32151602
Current consumption
typ. 28 mA ±15 % (at 24 V DC)
Description of the input
IO-Link ports in digital input (DI) mode
Nominal input voltage UIN
24 V DC
Input frequency
0.5 kHz
Output description
IO-Link ports in digital output (DO) mode
Maximum output current per channel
150 mA
Output voltage when switched off
max. 1 V
Behavior with overload
Shutdown with automatic restart
Protection class
III (IEC 61140, EN 61140, VDE 0140-1)
ECLASS 7.0
27242604
ETIM 4.0
EC001599
UNSPSC 7.0901
43201404
UNSPSC 11
39121311
UNSPSC 18.0
32151602
Number of inputs
max. 8 (EN 61131-2 type 1)
Input voltage range "0" signal
-0.3 V DC ... 5 V DC
Nominal input current
typ. 3 mA
Nominal load, inductive
3.6 VA (0.8 H, 160 Ω, at nominal load)
Immunity to conducted interference
Noise immunity test in accordance with EN 61000-6-2 Conducted interference EN 61000-4-6/IEC 61000-4-6 Criterion A, Test voltage 10 V
ECLASS 5.1
27242600
ECLASS 5.0
27242200
ETIM 3.0
EC001599
Input name
Digital inputs at pin 2 for type A ports
Number of outputs
max. 8
Maximum output current per device
1.2 A
Supply voltage range
18 V DC ... 31.2 V DC (including all tolerances, including ripple)
Switching rate
1 per second, maximum (at nominal inductive load)
ECLASS 4.0
27240400
ETIM 2.0
EC001433
ETIM 7.0
EC001599
UNSPSC 19.0
32151602
Protective circuit
Overload protection, short-circuit protection of sensor supply
ECLASS 10.0.1
27242604
Net weight
718.3 g
Number
2
Equipment type
Modbus slave (server)
Depth
38 mm
Ambient temperature (storage/transport)
-25 °C ... 85 °C
Designation
Actuators (UA)
Designation connection point
Copper cable
Test section
24 V supply (communications power and sensor supply, IO-Link ports)/bus connection (Ethernet 1) 500 V AC 50 Hz 1 min.
ECLASS 4.1
27240400
Immunity to ESD
Noise immunity test in accordance with EN 61000-6-2 Electrostatic discharge (ESD) EN 61000-4-2/IEC 61000-4-2 Criterion B, 6 kV contact discharge, 8 kV air discharge
ECLASS 11.0
27242604
Immunity to EF
Noise immunity test in accordance with EN 61000-6-2 Electromagnetic fields EN 61000-4-3/IEC 61000-4-3 Criterion A, Field intensity: 10 V/m
REACh SVHC
Lead 7439-92-1
China RoHS
Environmentally Friendly Use Period = 25;
Height
185 mm
Connection method
M12 connector, X01 ... X04 have double occupancy
Nominal input current at UIN
typ. 3 mA
Utilization restriction
EMC: class A product, see manufacturer's declaration in the download area
Drill hole spacing
198.5 mm
Housing material
Zinc die-cast
Permissible humidity (operation)
5 % ... 95 %
Degree of protection
IP65/IP67
Air pressure (operation)
70 kPa ... 106 kPa (up to 3000 m above sea level)
Protocols supported
SNMP v1
Permissible humidity (storage/transport)
5 % ... 95 %
Number of positions
4
Air pressure (storage/transport)
70 kPa ... 106 kPa (up to 3000 m above sea level)
Mounting type
Wall mounting or DIN rail mounting; both with mounting plate.
Mechanical tests
Vibration resistance in acc. with EN 60068-2-6/IEC 60068-2-6 5g
Immunity to surge
Noise immunity test in accordance with EN 61000-6-2 Transient overvoltage (surge) EN 61000-4-5/IEC 61000-4-5 Criterion B, DC supply lines: ±0.5 kV/±0.5 kV (symmetrical/asymmetrical)
Transmission speed
10/100 Mbps (with auto negotiation)
System-specific protocols
Modbus protocols Modbus/TCP
Input filter time
< 1000 µs
Specification
Modbus application protocol V1.1b
Note on the connection method
D-coded
Note on dimensions
The height is 194.5 mm including the mounting plate. With fixing clips pulled out, the height is 212 mm. The depth is 38 mm including the mounting plate (30.5 mm without the mounting plate).