2701551 Phoenix Contact Programmable Logic Controllers
Part#:2701551
Manufacturer:Phoenix Contact
Product Lifecycle:Active
Get a quick Quote!
Axioline E, Digital I/O device, Sercos, M12 fast connection technology, Digital inputs: 8, 24 V DC, connection method: 4-conductor, Digital outputs: 4, 24 V DC, 2 A, connection method: 3-conductor, Metal housing, degree of protection: IP65/IP67
About the manufacturer: Phoenix Contact is one of the manufacturers that offers Programmable Logic Controllers that you can order at marketplace.quotebeam.com. Phoenix Contact manufactures industrial electrical and electronic technology products that offer power, protection, connectivity, and automation for systems and equipment.
Check out the 2701551 Phoenix Contact price in the box on the right side or send a quick quote.
Product Details
- ETIM 4.0 EC001599
- UNSPSC 6.01 43172015
- Ambient temperature (storage/transport) -25 °C ... 85 °C
- UNSPSC 18.0 32151602
- Mounting type Wall mounting or DIN rail mounting; both with mounting plate.
- Note on the connection method D-coded
- Equipment type Sercos slave
- Connection technology 3-conductor
- Nominal input voltage UIN 24 V DC
- Output name Digital outputs
- Number of outputs 4
- Output voltage when switched off max. 1 V
- Immunity to ESD Noise immunity test in accordance with EN 61000-6-2 Electrostatic discharge (ESD) EN 61000-4-2/IEC 61000-4-2 Criterion B, 6 kV contact discharge, 8 kV air discharge
- Immunity to conducted interference Noise immunity test in accordance with EN 61000-6-2 Conducted interference EN 61000-4-6/IEC 61000-4-6 Criterion A, Test voltage 10 V
- ECLASS 11.0 27242604
- ECLASS 4.1 27240400
- Width 60 mm
- Drill hole spacing 198.5 mm
- Permissible humidity (storage/transport) 5 % ... 95 %
- Designation Actuators (UA)
- Connection method M12 connector, (A-coded)
- Number 2
- Specification Sercos specification 1.1.2
- Input name Digital inputs
- Input filter time < 1000 µs
- Output voltage 24 V
- Reverse voltage resistance to short pulses Reverse voltage proof
- Immunity to burst Noise immunity test in accordance with EN 61000-6-2 Fast transients (burst) EN 61000-4-4/IEC 61000-4-4 Criterion B, 2 kV
- Mechanical tests Vibration resistance in acc. with EN 60068-2-6/IEC 60068-2-6 5g
- ECLASS 10.0.1 27242604
- ECLASS 6.0 27242600
- ECLASS 4.0 27240400
- Protective circuit Overload protection, short-circuit protection of outputs yes
- Number of inputs 8
- Nominal output voltage 24 V DC (from voltage UA)
- Nominal load, ohmic 48 W (48 Ω, with nominal voltage)
- Immunity to EF Noise immunity test in accordance with EN 61000-6-2 Electromagnetic fields EN 61000-4-3/IEC 61000-4-3 Criterion A, Field intensity: 10 V/m
- Protection class III (IEC 61140, EN 61140, VDE 0140-1)
- ECLASS 5.1 27242600
- Input voltage range "1" signal 11 V DC ... 30 V DC
- Nominal input current at UIN typ. 3 mA
- Output current when switched off max. 20 µA
- Behavior with overload Auto restart
- Interference emission Noise emission test as per EN 61000-6-4 Class A
- China RoHS Environmentally Friendly Use Period = 25;
- ECLASS 5.0 27242200
- ECLASS 9.0 27242604
- ETIM 6.0 EC001599
- ETIM 3.0 EC001599
- UNSPSC 19.0 32151602
- Description of the input EN 61131-2 types 1 and 3
- Input voltage range "0" signal 0 V ... 5 V DC
- Nominal load, inductive 48 VA (1.2 H, 48 Ω, with nominal voltage)
- Switching frequency max. 5500 per second (with at least 50 mA load current)
- Test section 24 V supply (communications power and sensor supply, digital inputs)/bus connection (Ethernet 1) 500 V AC 50 Hz 1 min.
- REACh SVHC Lead 7439-92-1
- ETIM 2.0 EC001433
- Air pressure (storage/transport) 70 kPa ... 106 kPa (up to 3000 m above sea level)
- Transmission speed 100 Mbps (with auto negotiation)
- System-specific protocols Sercos protocols Sercos
- Supply voltage 24 V DC
- Ambient temperature (operation) -25 °C ... 60 °C
- Air pressure (operation) 70 kPa ... 106 kPa (up to 3000 m above sea level)
- Degree of protection IP65/IP67
- Depth 38 mm
- Housing material Zinc die-cast
- Net weight 708.1 g
- Designation connection point Copper cable
- Height 185 mm
- Note on dimensions The height is 194.5 mm including the mounting plate. With fixing clips pulled out, the height is 212 mm. The depth is 38 mm including the mounting plate (30.5 mm without the mounting plate).
- Permissible humidity (operation) 5 % ... 95 %
- Device profile FSP_IO
- Supply voltage range 18 V DC ... 31.2 V DC (including all tolerances, including ripple)
- Utilization restriction EMC: class A product, see manufacturer's declaration in the download area
- Number of positions 4
- Protocols supported HTTP
- Current consumption typ. 30 mA ±15 % (at 24 V DC)
- ETIM 7.0 EC001599
- UNSPSC 12.01 39121311
- UNSPSC 21.0 32151602
- UNSPSC 11 39121311
- ECLASS 7.0 27242604
- UNSPSC 7.0901 43201404
- UNSPSC 20.0 32151602
- UNSPSC 13.2 32151602
- Immunity to surge Noise immunity test in accordance with EN 61000-6-2 Transient overvoltage (surge) EN 61000-4-5/IEC 61000-4-5 Criterion B, DC supply lines: ±0.5 kV/±0.5 kV (symmetrical/asymmetrical)
Product condition
ORIGINAL PACKAGING
SURPLUS ORIGINAL PACKAGING - 100% unused and in original packaging
1-year warranty
Get a quick Quote!
Request a quote, and we will send you price and availability within minutes.
Select Qty:
Average response time: 11 minutes
By purchasing this item, you agree to the Terms & Conditions
Quotebeam is NOT an authorized distributor of Phoenix Contact
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Phoenix Contact Disclaimer:
The product is unused surplus. Quotebeam is not an authorized surplus dealer or affiliate for the Manufacturer of this product. Products may feature older date codes or be from an earlier series than what is currently available from the manufacturer or authorized dealers. Because Quotebeam is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Phoenix Contact Controls products will have firmware already installed, Quotebeam makes no representation as to whether a Controls product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Quotebeam also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Phoenix Contact, its distributors, or any other source. Quotebeam also makes no representations as to your right to install any such firmware on the product. Quotebeam will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Relevant products
Do you have questions?
We’re here for you ✨
We are a proud member of:
