2702291 Phoenix Contact Programmable Logic Controllers

Product Details

• Width
  35 mm
• Ambient temperature (operation)
  -25 °C ... 60 °C
• Note on the connection method
  Please observe the information provided on conductor cross sections in the “Axioline F: system and installation” user manual.
• Conductor cross section flexible max.
  1.5 mm²
• Mounting type
  DIN rail
• Current consumption
  max. 16 A (Provide external protection; if the total current of 8 A is exceeded, connect the supply at the power connector parallel via both terminal points.)
• Protection
  max. 16 A (polarity reversal protection up to 5 A)
• Nominal input voltage UIN
  24 V DC
• Number of outputs
  8
• Output voltage when switched off
  max. 1 V
• Immunity to EF
  Noise immunity test in accordance with EN 61000-6-2 Electromagnetic fields EN 61000-4-3/IEC 61000-4-3 Criterion A, Field intensity: 10 V/m
• Mechanical tests
  Vibration resistance in acc. with EN 60068-2-6/IEC 60068-2-6 5g
• UNSPSC 13.2
  32151602
• Net weight
  111 g
• UNSPSC 21.0
  32151602
• Caption
  Dimensions
• Note on dimensions
  The depth is valid when a TH 35-7,5 DIN rail is used (according to EN 60715).
• Permissible humidity (operation)
  5 % ... 95 % (non-condensing)
• Air pressure (operation)
  70 kPa ... 106 kPa (up to 3000 m above sea level)
• Conductor cross section solid min.
  0.2 mm²
Conductor cross section flexible min.
0.2 mm²
Number of interfaces
2
Protective circuit
Short-circuit protection, overload protection of the outputs electronic
Input name
Digital inputs
Input filter time
3000 µs (Default)
ECLASS 10.0.1
27242604
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Degree of protection
IP20
Conductor cross section AWG min.
24
Note on weight specifications
with connectors and bus base module
Immunity to ESD
Noise immunity test in accordance with EN 61000-6-2 Electrostatic discharge (ESD) EN 61000-4-2/IEC 61000-4-2 Criterion B, 6 kV contact discharge, 8 kV air discharge
Immunity to burst
Noise immunity test in accordance with EN 61000-6-2 Fast transients (burst) EN 61000-4-4/IEC 61000-4-4 Criterion B, 2 kV
Overvoltage category
II (IEC 60664-1, EN 60664-1)
ECLASS 5.1
27242600
ETIM 6.0
EC001599
Degree of pollution
2 (IEC 60664-1, EN 60664-1)
Supply voltage
24 V DC
Description of the input
EN 61131-2 types 1 and 3
Nominal input current at UIN
2.4 mA
Output voltage
24 V DC
Switching frequency
max. 3000 per second (with at least 50 mA load current)
Nominal load, lamp
max. 48 W (at nominal voltage)
UNSPSC 18.0
32151602
Input voltage range "1" signal
11 V DC ... 30 V DC
Nominal load, ohmic
max. 48 W (12 Ω, at nominal load)
Reverse voltage resistance to short pulses
limited protection up to 0.5 A for 1 s
Depth
54 mm
Air pressure (storage/transport)
70 kPa ... 106 kPa (up to 3000 m above sea level)
Conductor cross section solid max.
1.5 mm²
Stripping length
8 mm
Transmission speed
100 Mbps
Power consumption
max. 480 W (of which 6.4 W internal losses)
Number of inputs
16
Interference emission
Noise emission test according to EN 61000-6-3 Class B
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 7.0
27242604
UNSPSC 20.0
32151602
ECLASS 11.0
27242604
ETIM 7.0
EC001599
Height
129.9 mm
Permissible humidity (storage/transport)
5 % ... 95 % (non-condensing)
Designation
Supply for digital input and output modules (UIO)
Connection method
Push-in connection
Color
traffic grey A RAL 7042
Conductor cross section AWG max.
16
Mounting position
any (no temperature derating)
Supply voltage range
19.2 V DC ... 30 V DC (including all tolerances, including ripple)
Connection technology
2-conductor
Output name
Digital outputs
Nominal output voltage
24 V DC
Load min.
10 kΩ
Test section
5 V supply of the local bus (UBus) / 24 V supply (I/Os) 500 V AC 50 Hz 1 min.
Behavior with overload
Shutdown with automatic restart
Immunity to conducted interference
Noise immunity test in accordance with EN 61000-6-2 Conducted interference EN 61000-4-6/IEC 61000-4-6 Criterion A, Test voltage 10 V
ECLASS 9.0
27242604
UNSPSC 19.0
32151602
Input voltage range "0" signal
-3 V DC ... 5 V DC
Nominal load, inductive
max. 48 VA (1.2 H, 12 Ω, at nominal load)
Output current when switched off
max. 300 µA
Behavior with inductive overload
Output can be destroyed
Protection class
III (IEC 61140, EN 61140, VDE 0140-1)
REACh SVHC
Lead 7439-92-1
ECLASS 6.0
27242600
Immunity to surge
Noise immunity test in accordance with EN 61000-6-2 Transient overvoltage (surge) EN 61000-4-5/IEC 61000-4-5 Criterion B, DC supply lines: ±0.5 kV/±0.5 kV (symmetrical/asymmetrical)