2702356 Phoenix Contact Electrical Safety Devices
Part#:2702356
Manufacturer:Phoenix Contact
Product Lifecycle:Active
In-stock parts: 20
Dec 22, 2024
Safety relay module for sensor-free standstill monitoring for 3- and 1-phase motors to SILCL 3, Cat. 3, PL e, two-channel evaluation of the remanence voltage of AC, three-phase, and DC motors, pluggable Push-in terminal block, width: 12.5 mm
About the manufacturer: Phoenix Contact is one of the manufacturers that offers Electrical Safety Devices that you can order at marketplace.quotebeam.com. Phoenix Contact manufactures industrial electrical and electronic technology products that offer power, protection, connectivity, and automation for systems and equipment.
Check out the 2702356 Phoenix Contact price in the box on the right side or send a quick quote.
Product Details
- Width 12.5 mm
- Max. permissible humidity (storage/transport) 75 % (on average, 85% infrequently, non-condensing)
- Maximum altitude max. 2000 m (Above sea level)
- Current consumption max. 0.35 mA (at L1/L2/L3)
- Number of outputs 2 (digital, PNP)
- Sq. Total current 25 A2 (observe derating)
- Mechanical service life 10x 106 cycles
- Short-circuit protection Yes
- Nominal operating mode 100% operating factor
- Housing material PBT
- pluggable Yes
- Conductor cross-section AWG 24 ... 16
- Stripping length 8 mm
- Safety Integrity Level Claim Limit (SIL CL) 3 (4 A DC13; 5 A AC15; 17520 switching cycles/year)
- Shock 15g
- ECLASS 11.0 27371811
- Height 116.6 mm
- Rated control supply current IS typ. 50 mA
- Filter time 1 ms (at A1 in the event of voltage dips at Us)
- Switching capacity min. 72 mW
- Voltage 23 V DC (US - 1 V)
- Typical pickup time at US < 1 s
- Assembly instructions See derating curve
- Conductor cross section solid 0.2 mm² ... 1.5 mm²
- Conductor cross-section flexible with ferrule and plastic sleeve 0.25 mm² ... 1.5 mm² (only together with CRIMPFOX 6)
- Performance level (PL) e (4 A DC13; 5 A AC15; 17520 switching cycles/year)
- Standards/regulations DIN EN 50178
- Vibration (operation) 10 Hz ... 150 Hz, 2g
- Conformance CE-compliant
- ECLASS 4.0 40020600
- ETIM 4.0 EC001449
- Max. permissible relative humidity (operation) 75 % (on average, 85% infrequently, non-condensing)
- Inrush current min. 3 mA
- Output description safety-related N/O contacts
- Contact type 1 enabling current path
- Output fuse 5 A gL/gG
- Delay time range 0.5 s ... 20 s ±1 % (K1, K2 can be parameterized)
- Degree of protection IP20
- Connection method Push-in connection
- Conductor cross section flexible 0.2 mm² ... 1.5 mm²
- Designation Air clearances and creepage distances between the power circuits
- Rated insulation voltage 250 V AC
- China RoHS Environmentally friendly use period: unlimited = EFUP-e
- ECLASS 4.1 40020600
- ECLASS 7.0 27371811
- ETIM 7.0 EC001448
- UNSPSC 7.0901 39121501
- UNSPSC 21.0 39122331
- Utilization restriction EMC: class A product, see manufacturer's declaration in the download area
- Depth 114.5 mm
- Rated control circuit supply voltage US 24 V DC -15 % / +10 %
- Power consumption at US typ. 1.2 W
- Limit frequency max. 3 kHz (At voltages > 2 VRMS)
- Output name Enabling current path
- Contact material AgSnO2
- Switching voltage min. 24 V AC/DC
- Maximum inrush current 500 mA
- Response time typ. 20 ms (at 50 Hz input frequency)
- Mounting position vertical or horizontal
- Min. degree of protection of inst. location IP54
- Housing color yellow
- Stop category 0
- Category 3
- Rated surge voltage/insulation Basic insulation 4 kV:between all current paths and housingBasic insulation 8 kV:between L1 and L2between L1 and L3between L2 and L3
- Degree of pollution 2
- ECLASS 5.0 27371900
- ECLASS 9.0 27371811
- ETIM 6.0 EC001448
- UNSPSC 12.01 39121501
- UNSPSC 20.0 39122331
- Ambient temperature (operation) -20 °C ... 55 °C (observe derating)
- Ambient temperature (storage/transport) -40 °C ... 85 °C
- Protective circuit Surge protection Suppressor diode
- Voltage input signal max. 690 V AC/DC (at L1/L2/L3)
- Limiting continuous current 5 A (observe derating)
- Switching frequency max. 0.5 Hz
- Current max. 100 mA
- Net weight 143.9 g
- Mounting type DIN rail mounting
- Status display 4 x LED Bi-Colour
- Conductor cross-section flexible with ferrule without plastic sleeve 0.25 mm² ... 1.5 mm² (only together with CRIMPFOX 6)
- Safety Integrity Level (SIL) 3 (4 A DC13; 5 A AC15; 17520 switching cycles/year)
- Overvoltage category III
- ECLASS 10.0.1 27371811
- ECLASS 5.1 27371900
- ETIM 3.0 EC001449
- UNSPSC 6.01 30211901
- UNSPSC 13.2 39122331
- ECLASS 6.0 27371800
- UNSPSC 11 39121501
- UNSPSC 19.0 39122331
- UNSPSC 18.0 39122331
Product condition
ORIGINAL PACKAGING
SURPLUS ORIGINAL PACKAGING - 100% unused and in original packaging
This item can ship within 24h!
1-year warranty
$632.62
Stock:
20
Select Qty:
$632.62
$632.62 each
By purchasing this item, you agree to the Terms & Conditions
Quotebeam is NOT an authorized distributor of Phoenix Contact
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Phoenix Contact Disclaimer:
The product is unused surplus. Quotebeam is not an authorized surplus dealer or affiliate for the Manufacturer of this product. Products may feature older date codes or be from an earlier series than what is currently available from the manufacturer or authorized dealers. Because Quotebeam is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Phoenix Contact Controls products will have firmware already installed, Quotebeam makes no representation as to whether a Controls product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Quotebeam also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Phoenix Contact, its distributors, or any other source. Quotebeam also makes no representations as to your right to install any such firmware on the product. Quotebeam will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Relevant products
Do you have questions?
We’re here for you ✨
We are a proud member of:
