2702925 Phoenix Contact Electrical Safety Devices

Product Details

• Utilization restriction
  EMC: class A product, see manufacturer's declaration in the download area
• Depth
  114.5 mm
• Ambient temperature (operation)
  -20 °C ... 55 °C (observe derating)
• Typ. starting time with Us
  < 100 ms (when controlled via A1)
• Operating voltage display
  1 x green LED
• Maximum switching frequency
  0.5 Hz
• Minimum switching voltage
  5 V AC/DC
• Height
  112 mm
• Max. permissible humidity (storage/transport)
  75 % (on average, 85% infrequently, non-condensing)
• Protective circuit
  Surge protection Suppressor diode and varistors
• Contact type
  4 enabling current paths
• Maximum inrush current
  8 A
• Sq. Total current
  72 A2 (observe derating)
• Switching capacity according to IEC 60947-5-1
  5 A (24 V (DC13))
• Mounting type
  DIN rail mounting
• Degree of protection
  IP20
• Connection method
  Push-in connection
• Conductor cross-section flexible with ferrule without plastic sleeve
  0.25 mm² ... 1.5 mm² (only together with CRIMPFOX 6)
• Safety Integrity Level (SIL)
  3
• Overvoltage category
  III
ECLASS 11.0
27371819
ECLASS 9.0
27371819
Width
22.5 mm
Maximum altitude
≤ 2000 m (Above sea level)
Inrush current
< 38 A (Δt = 50 µs at Us)
Recovery time
< 1 s
Limiting continuous current
6 A (N/O contact, pay attention to the derating)
Mechanical service life
10x 106 cycles
Net weight
170.91 g
Min. degree of protection of inst. location
IP54
Conductor cross section flexible
0.2 mm² ... 1.5 mm²
Conductor cross-section flexible with ferrule and plastic sleeve
0.25 mm² ... 1.5 mm² (only together with CRIMPFOX 6)
Standards/regulations
DIN EN 50178/VDE 0160
Rated insulation voltage
250 V AC
REACh SVHC
Lead 7439-92-1
ECLASS 5.1
27371901
ECLASS 6.0
27371800
Max. permissible relative humidity (operation)
75 % (on average, 85% infrequently, non-condensing)
Rated control circuit supply voltage US
42 V AC/DC ... 230 V AC/DC -15 % ... +10 % (Rated control circuit supply voltage US)
Typical release time
< 20 ms (Control via A1 at 42 V DC)
Contact material
AgSnO2
Interrupting rating (ohmic load) max.
1500 VA (N/O contact, 250 V AC, τ = 0 ms)
Switching capacity
min. 50 mW
Relay type
Electromechanical relay with force-guided contacts in accordance with IEC/EN 61810-3
Mounting position
vertical or horizontal
pluggable
Yes
Stop category
0
Designation
Air clearances and creepage distances between the power circuits
Safety Integrity Level Claim Limit (SIL CL)
3 (In conjunction with suitable evaluating device)
Conformance
CE-compliant
ECLASS 10.0.1
27371819
ETIM 7.0
EC001449
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Rated control supply current IS
typ. 35 mA (42 V DC)
Power consumption at US
max. 1.5 W (with DC)
Maximum switching voltage
250 V AC/DC (Observe the load curve)
Inrush current, minimum
10 mA
Output fuse
6 A gL/gG (N/O contact and N/C contact 61/62)
Housing color
yellow
Conductor cross-section AWG
24 ... 16
Stripping length
8 mm
Category
4 (In conjunction with suitable evaluating device)
Rated surge voltage/insulation
Safe isolation, reinforced insulation 6 kV:between (A1/A2) and the remaining current pathsbetween (51/52) and the remaining current pathsbetween (61/62) and the remaining current pathsbetween (13/14, 23/24, 33/34, 43/44) and the remaining current paths
Shock
15g
ECLASS 7.0
27371819
Maximum interrupting rating (inductive load)
48 W (N/O contact, 24 V DC, τ = 40 ms)
Nominal operating mode
100% operating factor
Assembly instructions
See derating curve
Housing material
PBT
Conductor cross section solid
0.2 mm² ... 1.5 mm²
Performance level (PL)
e (In conjunction with suitable evaluating device)
Degree of pollution
2
Vibration (operation)
10 Hz ... 150 Hz, 2g
China RoHS
Environmentally Friendly Use Period = 50 years
ETIM 6.0
EC001449