2703981 Phoenix Contact Programmable Logic Controllers

Product Details

• Note on dimensions
  Specfications with connectors
• Air pressure (storage/transport)
  70 kPa ... 106 kPa (up to 3000 m above sea level)
• Color
  green
• Connection method
  Inline connector
• Designation
  Segment circuit supply (US)
• Number of supported devices
  max. 63 (per station)
• Power supply unit
  max. 8 A DC (Sum of UM + US; 4 A, maximum, when used in potentially explosive areas.)
• Number of inputs
  8
• Delay at signal change from 1 to 0
  1.2 ms
• Input voltage range "1" signal
  15 V DC ... 30 V DC
• Nominal load, inductive
  12 VA (1.2 H, 48 Ω)
• Behavior with overload
  Auto restart
• Immunity to EF
  Noise immunity test in accordance with EN 61000-6-2 Electromagnetic fields EN 61000-4-3/IEC 61000-4-3 Criterion A, Field intensity: 10 V/m
• Height
  119.8 mm
• Permissible humidity (operation)
  10 % ... 95 % (non-condensing)
• Mounting type
  DIN rail mounting
• Note on weight specifications
  with connectors
• Number
  2
• Number of devices with parameter channel
  max. 16
• Power consumption
  typ. 3 W (entire device)
Type of protection
Surge protection (segment supply, main supply, bus coupler supply)
Protective circuit
Short-circuit and overload protection Freewheeling circuit in the output driver
Typical input current per channel
typ. 3 mA
Output voltage
24 V DC -1 V (At nominal current)
Limitation of the voltage induced on circuit interruption
approx. -30 V
Interference emission
Noise emission test as per EN 61000-6-4 Class A
REACh SVHC
Lead 7439-92-1
ECLASS 5.1
27242600
ETIM 4.0
EC001604
ETIM 3.0
EC001604
UNSPSC 12.01
43201404
UNSPSC 20.0
32151602
Depth
71.5 mm
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Degree of protection
IP20
Diagnostics messages
Short-circuit or overload of the digital outputs Yes
Transmission speed
500 kbps / 2 Mbps (automatic detection, no combined system)
Number of supported branch terminals with remote bus branch
0
Supply voltage range
19.2 V DC ... 30 V DC (including all tolerances, including ripple)
Input name
Digital inputs
Nominal input voltage UIN
24 V DC
Number of outputs
4
Delay at signal change from 0 to 1
1.2 ms
Output current when switched off
max. 10 µA (When not loaded, a voltage can be measured even at an output that is not set.)
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
Utilization restriction
EMC: class A product, see manufacturer's declaration in the download area
Ambient temperature (operation)
-25 °C ... 55 °C
Permissible humidity (storage/transport)
10 % ... 95 % (non-condensing)
Note on the connection method
Auto negotiation and autocrossing
Supply voltage
24 V DC (via Inline connector)
Current consumption
min. 3 mA (without actuators)
Protection class
III (IEC 61140, EN 61140, VDE 0140-1)
ECLASS 5.0
27250200
Description of the input
EN 61131-2 type 1
Input voltage range "0" signal
-30 V DC ... 5 V DC
Input voltage
24 V DC
Nominal load, lamp
12 W
Reverse voltage resistance to short pulses
Reverse voltage proof
Immunity to conducted interference
Noise immunity test in accordance with EN 61000-6-2 Conducted interference EN 61000-4-6/IEC 61000-4-6 Criterion A, Test voltage 10 V
Width
80 mm
Air pressure (operation)
70 kPa ... 106 kPa (up to 3000 m above sea level)
Net weight
341.14 g
Behavior with inductive overload
Output can be destroyed
Mechanical tests
Vibration resistance in acc. with EN 60068-2-6/IEC 60068-2-6 5g
Transmission physics
Ethernet in RJ45 twisted pair
Number of local bus devices that can be connected
max. 61 (The on-board I/Os are two devices)
Connection technology
3-conductor
Typical response time
approx. 500 µs
Nominal input current at UIN
typ. 3 mA
Output name
Digital outputs
Nominal output voltage
24 V DC
Nominal load, ohmic
12 W
Connection in acc. with standard
CUL
ECLASS 11.0
27242608
ECLASS 4.0
27250200
ETIM 2.0
EC001434
UNSPSC 11
43172015
UNSPSC 19.0
32151602
Immunity to ESD
Noise immunity test in accordance with EN 61000-6-2 Electrostatic discharge (ESD) EN 61000-4-2/IEC 61000-4-2 Criterion B, 6 kV contact discharge, 8 kV air discharge
ECLASS 10.0.1
27242608
UNSPSC 6.01
43172015
UNSPSC 7.0901
43201404
UNSPSC 18.0
32151602
ECLASS 4.1
27250200
UNSPSC 13.2
32151602
UNSPSC 21.0
32151602
Immunity to burst
Noise immunity test in accordance with EN 61000-6-2 Fast transients (burst) EN 61000-4-4/IEC 61000-4-4 Criterion A, all interfaces 1 kVCriterion B, all interfaces 2 kV
ETIM 7.0
EC001604
ECLASS 6.0
27242600
ECLASS 9.0
27242608
Immunity to surge
Noise immunity test in accordance with EN 61000-6-2 Transient overvoltage (surge) EN 61000-4-5/IEC 61000-4-5 Criterion B, supply lines DC: 0.5 kV/0.5 kV (symmetrical/asymmetrical), fieldbus cable shield 1 kV
ECLASS 7.0
27242608
ETIM 6.0
EC001604