2708339 Phoenix Contact Data & Networking Devices
Part#:2708339
Manufacturer:Phoenix Contact
Product Lifecycle:Active
In-stock parts: 18
Dec 22, 2024
FO converter with integrated optical diagnostics, alarm contact, for RS-485 2-wire bus systems (SUCONET K, Modbus ...) up to 500 kbps, NRZ coding, terminal device with one FO interface (BFOC), 850 nm, for PCF/fiberglass cable (multimode)
About the manufacturer: Phoenix Contact is one of the manufacturers that offers Data & Networking Devices that you can order at marketplace.quotebeam.com. Phoenix Contact manufactures industrial electrical and electronic technology products that offer power, protection, connectivity, and automation for systems and equipment.
Check out the 2708339 Phoenix Contact price in the box on the right side or send a quick quote.
Product Details
- Supply voltage range 18 V DC ... 30 V DC (via pluggable COMBICON screw terminal block)
- File format/coding UART (11/10 bit switchable; NRZ), slip-tolerant
- Data direction switching Automatic control
- China RoHS Environmentally Friendly Use Period = 50 years
- Serial transmission speed 4.8/ 9.6/ 19.2/ 38.4/ 57.6/ 75/ 93.75/ 115.2/ 136/ 187.5/ 375/ 500 kbps
- Overrange receiver -3 dBm (200/230 µm)
- Transmission protocol Protocol-transparent to the RS-485 interface
- Temperature B
- Width 35 mm
- Certificate PTB 06 ATEX 2042 U
- ETIM 6.0 EC001467
- Standards/regulations DIN EN 60664-1
- UNSPSC 11 39121008
- Degree of protection IP20
- Bit distortion, output < 6.25 %
- ECLASS 5.0 27230200
- Housing material PA 6.6-FR
- Conductor cross section solid max. 2.5 mm²
- Conductor cross section solid min. 0.2 mm²
- Minimum receiver sensitivity -32.5 dBm (50/125 µm)
- UNSPSC 19.0 43223323
- Number of outputs 1
- Designation Air clearances and creepage distances
- Identification DNV GL
- EMC B
- Depth 105 mm
- UNSPSC 21.0 43223323
- Mounting type DIN rail mounting
- MTBF 272 Years (Telcordia standard, 25°C temperature, 21% operating cycle (5 days a week, 8 hours a day))
- Test result 15g, 11 ms period, half-sine shock pulse
- Connection method B-FOC (ST®)
- Operating mode Semi-duplex
- REACh SVHC Lead 7439-92-1
- ECLASS 4.1 27230200
- ECLASS 6.0 19179200
- ETIM 7.0 EC001467
- ECLASS 4.0 27230200
- ETIM 4.0 EC001423
- Utilization restriction EMC: class A product, see manufacturer's declaration in the download area
- Conductor cross section AWG max. 14
- Ambient temperature (storage/transport) -40 °C ... 85 °C
- Bit distortion, input ± 35 % (permitted)
- Test voltage data interface/power supply 1.5 kVrms (50 Hz, 1 min.)
- Color green
- Interface 1 RS-485 interface, 2-wire
- Conductor cross section AWG min. 24
- Wavelength 850 nm
- Transmission length min. 1 m ()
- Transmission medium PCF fiber
- Humidity A
- Free from substances that could impair the application of coating according to P-VW 3.10.7 57 65 0 VW-AUDI-Seat central standard
- Comments Criterion B
- ECLASS 9.0 19170114
- UNSPSC 20.0 43223323
- ECLASS 5.1 27230200
- Electromagnetic compatibility Conformance with EMC Directive 2014/30/EU
- Height 99 mm
- Permissible humidity (operation) 30 % ... 95 % (non-condensing)
- Noise immunity EN 61000-6-2:2005
- Noise emission EN 55011
- Typical current consumption 120 mA (24 V DC)
- Max. current consumption 130 mA
- Conductor cross section flexible min. 0.2 mm²
- No. of channels 1
- Output description Alarm output
- ETIM 2.0 EC001423
- UNSPSC 6.01 30211506
- UNSPSC 18.0 43223323
- Output name Relay output
- Additional text Please follow the special installation instructions in the documentation!
- Connection in acc. with standard CUL
- Contact discharge ± 6 kV
- Signal ± 1 kV
- ECLASS 7.0 19179290
- ETIM 3.0 EC001423
- Electrical isolation VCC // RS-485
- UNSPSC 7.0901 39121008
- Net weight 254.3 g
- Nominal supply voltage 24 V DC (in acc. with UL)
- Termination resistor 390 Ω
- Conductor cross section flexible max. 2.5 mm²
- Transmit capacity, minimum -4 dBm (200/230 µm)
- Maximum switching voltage 60 V DC
- UNSPSC 13.2 43222604
- UNSPSC 12.01 39121008
- Vibration A
- Type of test Shock in acc. with EN 60068-2-27/IEC 60068-2-27
- ECLASS 11.0 19170411
- Ambient temperature (operation) -20 °C ... 60 °C
- ECLASS 10.0.1 19170132
- Altitude ≤ 5000 m (For restrictions, see the manufacturer's declaration for altitude operation)
- Bit delay ≤ 1 bit
- Transmission length incl. 3 dB system reserve 2800 m (with F-K 200/230 8 dB/km with quick mounting connector)
- Enclosure Required protection according to the Rules shall be provided upon installation on board
- Limiting continuous current 0.46 A
Product condition
ORIGINAL PACKAGING
SURPLUS ORIGINAL PACKAGING - 100% unused and in original packaging
This item can ship within 24h!
1-year warranty
$1,096.26
Stock:
18
Select Qty:
$1,096.26
$1,096.26 each
By purchasing this item, you agree to the Terms & Conditions
Quotebeam is NOT an authorized distributor of Phoenix Contact
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Phoenix Contact Disclaimer:
The product is unused surplus. Quotebeam is not an authorized surplus dealer or affiliate for the Manufacturer of this product. Products may feature older date codes or be from an earlier series than what is currently available from the manufacturer or authorized dealers. Because Quotebeam is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Phoenix Contact Controls products will have firmware already installed, Quotebeam makes no representation as to whether a Controls product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Quotebeam also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Phoenix Contact, its distributors, or any other source. Quotebeam also makes no representations as to your right to install any such firmware on the product. Quotebeam will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Relevant products
Do you have questions?
We’re here for you ✨
We are a proud member of:
