2715979 Phoenix Contact Terminal Blocks

Product Details

• Number of connections
  6
• Insulating material
  PA
• Rated surge voltage
  4 kV
• Insulating material group
  I
• Maximum load current
  30 A (with 4 mm² conductor cross section)
• Shock protection test specification
  DIN EN 50274 (VDE 0660-514):2002-11
• Finger protection
  guaranteed
• Result of flexion and pull-out test
  Test passed
• Bending test conductor cross section/weight
  0.2 mm² / 0.2 kg
• Result of tight fit on support
  Test passed
• Result of temperature-rise test
  Test passed
• Proof of thermal characteristics (needle flame) effective duration
  30 s
• Test frequency
  f1 = 5 Hz to f2 = 250 Hz
• ASD level
  6.12 (m/s2)2/Hz
• Number of shocks per direction
  3
• Static insulating material application in cold
  -40 °C
• Length
  72.5 mm
• Connection method
  Screw connection
• Conductor cross section flexible min.
  0.2 mm²
• Conductor cross section AWG max.
  12
2 conductors with same cross section, solid min.
0.2 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Screw thread
M3
Tightening torque, min
0.5 Nm
ECLASS 11.0
27141128
ECLASS 6.0
27141100
ETIM 3.0
EC000900
UNSPSC 6.01
30211811
UNSPSC 18.0
39121410
Width
6.2 mm
Height NS 35/15
62 mm
Conductor cross section flexible max.
2.5 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
2.5 mm²
Cross section with insertion bridge, solid max.
4 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum
0.25 mm²
Stripping length
8 mm
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 125°C)
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 9.0
27141128
ETIM 4.0
EC000900
UNSPSC 7.0901
39121410
UNSPSC 20.0
39121410
2 conductors with same cross section, stranded min.
0.2 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
1 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 4.1
27141100
ETIM 6.0
EC000900
UNSPSC 11
39121410
UNSPSC 13.2
39121410
Nominal cross section
2.5 mm²
Flammability rating according to UL 94
V2
Overvoltage category
III
Connection in acc. with standard
CSA
Nominal voltage UN
250 V
Back of the hand protection
guaranteed
Result of power-frequency withstand voltage test
Test passed
Power frequency withstand voltage setpoint
1.5 kV
Bending test turns
135
Tight fit on carrier
NS 35
Short circuit stability result
Test passed
Result of thermal test
Test passed
Test spectrum
Service life test category 2, bogie-mounted
Acceleration
30g
Test directions
X-, Y- and Z-axis (pos. and neg.)
Relative insulation material temperature index (Elec.; UL 746 B)
125 °C
Height NS 35/7,5
54.5 mm
Conductor cross section solid max.
4 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.25 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.25 mm²
Cross section with insertion bridge, stranded max.
2.5 mm²
2 conductors with same cross section, stranded max.
1 mm²
Internal cylindrical gage
A3
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 10.0.1
27141128
ECLASS 5.0
27141100
ECLASS 7.0
27141128
Number of levels
3
Color
gray
Degree of pollution
3
Maximum power dissipation for nominal condition
0.77 W (the value is multiplied when connecting multiple levels)
Nominal current IN
24 A
Open side panel
No
Result of surge voltage test
Test passed
Checking the mechanical stability of terminal points (5 x conductor connection)
Test passed
Bending test rotation speed
10 (+/- 2) rpm
Setpoint
1 N
Conductor cross section short circuit testing
2.5 mm²
Short-time current
0.3 kA
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2018-05
Test duration per axis
5 h
Shock form
Half-sine
Shock duration
18 ms
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
125 °C
Conductor cross section solid min.
0.2 mm²
Conductor cross section AWG min.
24
Conductor cross section flexible, with ferrule with plastic sleeve max.
2.5 mm²
2 conductors with same cross section, solid max.
1 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum
1 mm²
Tightening torque max
0.6 Nm
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 4.0
27141100
ECLASS 5.1
27141100
ETIM 2.0
EC000900
ETIM 7.0
EC000900
UNSPSC 21.0
39121410
UNSPSC 12.01
39121410
UNSPSC 19.0
39121410