2717113 Phoenix Contact Terminal Blocks

Product Details

• Number of levels
  3
• Flammability rating according to UL 94
  V2
• Maximum load current
  16 A (with a 2.5 mm² conductor cross section)
• Surge voltage test setpoint
  4.8 kV
• Checking the mechanical stability of terminal points (5 x conductor connection)
  Test passed
• Tensile test result
  Test passed
• Insulating material
  PA
• Connection in acc. with standard
  CSA
• Insulating material group
  I
• Result of surge voltage test
  Test passed
• Open side panel
  No
• Result of tight fit on support
  Test passed
• Requirement, voltage drop 2nd level
  ≤ 6.4 mV
• Conductor cross section short circuit testing
  1.5 mm²
• Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
  130 °C
• Smoke gas toxicity NFPA 130 (SMP 800C)
  passed
• Width
  6.2 mm
• Conductor cross section flexible min.
  0.2 mm²
• Conductor cross section AWG min.
  24
• 2 conductors with same cross section, solid max.
  1 mm²
Nominal cross section
2.5 mm²
Degree of pollution
3
Overvoltage category
III
Nominal current IN (upper level)
16 A
Power frequency withstand voltage setpoint
1.5 kV
Conductor cross section tensile test
4 mm²
Tight fit on carrier
NS 35
Short-time current
0.18 kA
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Height NS 35/15
62 mm
Conductor cross section solid max.
4 mm²
Conductor cross section AWG max.
12
Conductor cross section flexible, with ferrule with plastic sleeve max.
2.5 mm²
2 conductors with same cross section, solid min.
0.2 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum
0.25 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
1 mm²
Tightening torque max
0.6 Nm
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 5.1
27141100
ETIM 6.0
EC000900
ETIM 7.0
EC000900
UNSPSC 20.0
39121410
Color
gray
Maximum power dissipation for nominal condition
0.77 W (the value is multiplied when connecting multiple levels)
Nominal voltage UN
250 V
Maximum load current (upper level)
16 A
Bending test rotation speed
10 rpm
Bending test conductor cross section/weight
0.2 mm² / 0.2 kg
Setpoint
1 N
Result of temperature-rise test
Test passed
Relative insulation material temperature index (Elec.; UL 746 B)
130 °C
Static insulating material application in cold
-60 °C
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Height NS 35/7,5
54.5 mm
Conductor cross section flexible max.
2.5 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.25 mm²
Cross section with insertion bridge, stranded max.
2.5 mm²
Stripping length
8 mm
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 5.0
27141100
ETIM 3.0
EC000900
UNSPSC 6.01
30211811
UNSPSC 11
39121410
Number of connections
4
Rated surge voltage
4 kV
Nominal current IN
16 A (the current is determined by the component used)
Result of power-frequency withstand voltage test
Test passed
Result of flexion and pull-out test
Test passed
Bending test turns
135
Result of voltage-drop test
Test passed
Short circuit stability result
Test passed
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Connection method
Screw connection
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.25 mm²
Cross section with insertion bridge, solid max.
4 mm²
2 conductors with same cross section, stranded min.
0.2 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Screw thread
M3
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 10.0.1
27141128
ECLASS 4.0
27141100
ECLASS 4.1
27141100
ETIM 4.0
EC000900
UNSPSC 18.0
39121410
Tractive force setpoint
60 N
Requirements, voltage drop
≤ 6,4 mV
Result of thermal test
Test passed
Proof of thermal characteristics (needle flame) effective duration
30 s
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Length
61 mm
Conductor cross section solid min.
0.2 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
2.5 mm²
2 conductors with same cross section, stranded max.
1 mm²
Tightening torque, min
0.5 Nm
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 6.0
27141100
ETIM 2.0
EC000900
UNSPSC 7.0901
39121410
UNSPSC 19.0
39121410
UNSPSC 21.0
39121410
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum
1 mm²
Internal cylindrical gage
A3
ECLASS 11.0
27141128
ECLASS 7.0
27141128
ECLASS 9.0
27141128
UNSPSC 13.2
39121410
UNSPSC 12.01
39121410