2727365 Phoenix Contact Programmable Logic Controllers


Part#:2727365
Manufacturer:Phoenix Contact
Product Lifecycle:Active
Get a quick Quote!
Inline power-level terminal blocks, electronic direct starter, up to 3.7 kW / 400 V AC
About the manufacturer: Phoenix Contact is one of the manufacturers that offers Programmable Logic Controllers that you can order at marketplace.quotebeam.com. Phoenix Contact manufactures industrial electrical and electronic technology products that offer power, protection, connectivity, and automation for systems and equipment.
Check out the 2727365 Phoenix Contact price in the box on the right side or send a quick quote.
Product Details
- Height 224 mm
- Permissible humidity (storage/transport) 10 % ... 85 % (non-condensing)
- Designation Segment circuit supply (US)
- Transmission speed 500 kbps
- Permissible conductor cross section 1 mm² ... 2.5 mm²
- Operating voltage 200 V AC ... 600 V AC +0 %
- Depth 109 mm
- Utilization restriction EMC: class A product, see manufacturer's declaration in the download area
- Ambient temperature (storage/transport) -25 °C ... 85 °C
- Air pressure (storage/transport) 70 kPa ... 106 kPa (up to 3000 m above sea level)
- Connection method COMBICON
- Designation connection point Terminal strip X10
- Frequency range 50 Hz ... 60 Hz
- Overspeed tripping ≥ 40 A (after 0.3 seconds)
- Input name Digital inputs
- Power consumption max. 4.2 W (entire device)
- Net weight 550 g
- Immunity to burst Noise immunity test in accordance with EN 61000-6-2 Fast transients (burst) EN 61000-4-4/IEC 61000-4-4 Criterion B; Supply lines: 2 kV; Signal/data lines: 2 kV
- Mechanical tests Vibration resistance in acc. with EN 60068-2-6/IEC 60068-2-6 1g, evaluation criterion 1
- ECLASS 4.0 27250300
- ECLASS 11.0 27242609
- ECLASS 9.0 27242609
- ETIM 6.0 EC001605
- UNSPSC 11 43172015
- UNSPSC 12.01 43201404
- UNSPSC 18.0 32151602
- Ambient temperature (operation) -25 °C ... 55 °C
- Degree of protection IP20
- Transmission physics Copper
- Max. current carrying capacity 20 A
- Switching rate max. 5 cycles per minute
- Connection technology COMBICON
- Current consumption max. 160 mA
- Diagnostics messages Overcurrent Error message in the diagnostic code (bus) and display via the LED ERR on the module
- Operating mode Process data mode with one byte
- Immunity to surge Noise immunity test in accordance with EN 61000-6-2 Transient overvoltage (surge) EN 61000-4-5/IEC 61000-4-5 Criterion B, supply lines DC: 0.5 kV/0.5 kV (symm./asymm.), criterion B, supply lines AC: 2 kV/4 kV (symm./asymm.)
- China RoHS Environmentally Friendly Use Period = 50 years
- ECLASS 4.1 27250300
- ECLASS 5.0 27250300
- ETIM 3.0 EC001601
- ETIM 7.0 EC001605
- UNSPSC 19.0 32151602
- Width 63 mm
- Permissible humidity (operation) 10 % ... 85 % (non-condensing)
- Air pressure (operation) 80 kPa ... 106 kPa (up to 2000 m above sea level)
- Note Notes on operation Line protection for the network supply line, max. 20 A. Observe derating of the POWER-COMBICON connector
- Number 1
- Number of positions 4
- Output name Motor output
- Parameterization range 0.2 A ... 8 A (steps of 50/100/200 mA, via fieldbus)
- Nominal current range 0.2 A ... 8 A
- Number of inputs 1
- Supply voltage 24 V DC (via voltage jumper)
- Mounting type DIN rail
- Assembly instructions To safeguard sufficient ventilation, ensure that there is an installation clearance of a minimum of 50 cm both above and below.
- Immunity to EF Noise immunity test in accordance with EN 61000-6-2 Electromagnetic fields EN 61000-4-3/IEC 61000-4-3 Criterion A, field strength: 3 V/m
- Interference emission Noise emission test as per EN 61000-6-4 Radio interference properties EN 55011 Class A
- REACh SVHC Lead 7439-92-1
- ECLASS 7.0 27242609
- ETIM 2.0 EC001433
- UNSPSC 6.01 43172015
- UNSPSC 13.2 32151602
- UNSPSC 21.0 32151602
- Type of contact Solid-state contact
- Filter time 0.2 ms
- Supply voltage range 19.2 V DC ... 28.8 V DC (including all tolerances, including ripple)
- Note on weight specifications without plug
- Immunity to ESD Noise immunity test in accordance with EN 61000-6-2 Electrostatic discharge (ESD) EN 61000-4-2/IEC 61000-4-2 6 kV contact discharge, criterion B, 8 kV air discharge, criterion B
- Mounting position Panel mounting on horizontal DIN rail
- Immunity to conducted interference Noise immunity test in accordance with EN 61000-6-2 Conducted interference EN 61000-4-6/IEC 61000-4-6 Criterion A, Test voltage 10 V
- ECLASS 6.0 27242600
- ETIM 4.0 EC001601
- UNSPSC 7.0901 43201404
- UNSPSC 20.0 32151602
- ECLASS 10.0.1 27242609
- Protection class I (МЭК 61140, EN 61140, VDE 0140-1)
- ECLASS 5.1 27242600
Product condition
ORIGINAL PACKAGING
SURPLUS ORIGINAL PACKAGING - 100% unused and in original packaging
1-year warranty
Get a quick Quote!
Request a quote, and we will send you price and availability within minutes.
Select Qty:
Average response time: 11 minutes
By purchasing this item, you agree to the Terms & Conditions
Quotebeam is NOT an authorized distributor of Phoenix Contact
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Phoenix Contact Disclaimer:
The product is unused surplus. Quotebeam is not an authorized surplus dealer or affiliate for the Manufacturer of this product. Products may feature older date codes or be from an earlier series than what is currently available from the manufacturer or authorized dealers. Because Quotebeam is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Phoenix Contact Controls products will have firmware already installed, Quotebeam makes no representation as to whether a Controls product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Quotebeam also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Phoenix Contact, its distributors, or any other source. Quotebeam also makes no representations as to your right to install any such firmware on the product. Quotebeam will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Relevant products
Do you have questions?
We’re here for you ✨