2770888 Phoenix Contact Terminal Blocks

Product Details

• Number of levels
  2
• Degree of pollution
  3
• Number of connections
  4
• Insulating material group
  I
• Ambient temperature (assembly)
  -5 °C ... 70 °C
• Open side panel
  Yes
• Back of the hand protection
  guaranteed
• Bending test turns
  135
• Short-time current
  0.12 kA
• Insulating material
  PA
• Rated surge voltage
  4 kV
• Maximum load current
  12 A (with 4 mm² conductor cross section)
• Number of positions
  1
• Result of flexion and pull-out test
  Test passed
• Flammability rating according to UL 94
  V2
• Ambient temperature (storage/transport)
  -25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
• Nominal current IN
  10 A
• Bending test rotation speed
  10 rpm
• Conductor cross section short circuit testing
  1 mm²
• Proof of thermal characteristics (needle flame) effective duration
  30 s
Conductor cross section solid max.
4 mm²
Conductor cross section AWG max.
12
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.25 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
1 mm²
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 5.0
27141100
ECLASS 5.1
27141100
UNSPSC 11
39121410
UNSPSC 13.2
39121410
Color
gray
Overvoltage category
III
Ambient temperature (actuation)
-5 °C ... 70 °C
Nominal voltage UN
250 V
Finger protection
guaranteed
Result of thermal test
Test passed
Conductor cross section solid min.
0.2 mm²
Conductor cross section flexible max.
2.5 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
2.5 mm²
2 conductors with same cross section, solid min.
0.2 mm²
2 conductors with same cross section, stranded min.
0.2 mm²
Tightening torque, min
0.5 Nm
ECLASS 4.0
27141100
ECLASS 9.0
27141120
ETIM 6.0
EC000897
UNSPSC 6.01
30211811
UNSPSC 21.0
39121410
Ambient temperature (operation)
-60 °C ... 105 °C (max. short-term operating temperature 125°C)
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Result of power-frequency withstand voltage test
Test passed
Result of tight fit on support
NS 32/NS 35
Relative insulation material temperature index (Elec., UL 746 B)
125 °C
Static insulating material application in cold
-40 °C
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.25 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum
0.25 mm²
Connection method
Screw connection
Connection in acc. with standard
CSA
ECLASS 4.1
27141100
ECLASS 6.0
27141100
ETIM 4.0
EC000897
UNSPSC 7.0901
39121410
UNSPSC 12.01
39121410
UNSPSC 20.0
39121410
Power frequency withstand voltage setpoint
2.21 kV
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
125 °C
Conductor cross section AWG min.
24
Conductor cross section flexible, with ferrule with plastic sleeve max.
1.5 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum
0.5 mm²
Screw thread
M3
Internal cylindrical gage
A3
Tightening torque max
0.6 Nm
ECLASS 7.0
27141120
ETIM 2.0
EC000897
UNSPSC 19.0
39121410
Connection labeling
1st and 2nd level connection left
Conductor cross section flexible min.
0.2 mm²
2 conductors with same cross section, solid max.
1.5 mm²
2 conductors with same cross section, stranded max.
1 mm²
Stripping length
8 mm
ECLASS 10.0.1
27141120
ECLASS 11.0
27141120
ETIM 3.0
EC000897
ETIM 7.0
EC000897
UNSPSC 18.0
39121410