2868703 Phoenix Contact UPS (DC)

Product Details

• Height
  90 mm
• Degree of protection
  IP20
• Degree of pollution
  2
• Nominal input voltage
  24 V DC
• Output voltage range (depends on the input voltage)
  23 V DC ... 26.5 V DC (UOut = UIn (t-1))
• Nominal output voltage
  24 V DC
• Memory medium
  Lithium polymer
• Conductor cross section AWG min.
  24
• Screw thread
  M3
• Installation distance right/left
  0 mm / 0 mm
• Ambient temperature (storage/transport)
  -20 °C ... 45 °C
• Max. permissible relative humidity (operation)
  ≤ 95 % (at 25 °C, non-condensing)
• Input fuse, integrated
  7 A (slow-blow, internal)
• Nominal output current (IN)
  3 A (0 °C ... 40 °C)
• Mounting position
  horizontal DIN rail NS 35, EN 60715
• Conductor cross section solid min.
  0.2 mm²
• Stripping length
  6.5 mm
• Depth
  61 mm
• Climatic class
  3K3 (in acc. with EN 60721)
• Current consumption (maximum)
  4.7 A
Current consumption (idle)
< 30 mA
Efficiency
> 98 % (Mains operation, with charged energy storage)
Assembly instructions
alignable: horizontally 0 mm, vertically 50 mm
Conductor cross section AWG max.
12
Conductor cross section flexible min.
0.2 mm²
Deep discharge protection
< 15 V DC
Electromagnetic compatibility
Conformance with EMC Directive 2014/30/EU
Fast transients (burst)
EN 61000-4-4
Signal
1 kV (Test Level 2 - asymmetrical)
Criterion B
Temporary impairment to operational behavior that is corrected by the device itself.
ECLASS 11.0
27040705
ECLASS 4.0
27040600
ECLASS 9.0
27040705
UNSPSC 13.2
39121011
UNSPSC 12.01
39121011
Ambient temperature (operation)
0 °C ... 40 °C
Input voltage range
22.5 V DC ... 29.5 V DC
Fixed backup threshold
< 22.5 V
IQ technology
no
Protection class
III
Connection method
Screw connection
Quality check of battery
Yes, every time it is charged and cyclically once a month
Standard – Electronic equipment for use in electrical power installations and their assembly into electrical power installations
EN 50178/VDE 0160 (PELV)
Contact discharge
6 kV (Test Level 3)
Electromagnetic HF field
EN 61000-4-3
Output
1 kV (Test Level 2 - symmetrical)
Conducted interference
EN 61000-4-6
REACh SVHC
Lead 7439-92-1
ECLASS 10.0.1
27040705
ECLASS 5.1
27040600
ETIM 4.0
EC000382
UNSPSC 19.0
39121011
UNSPSC 18.0
39121011
Width
108 mm
Installation distance top/bottom
0 mm / 0 mm
Input voltage
24 V DC
Current consumption (charging process)
< 0.5 A (Charging (ICharge = max, IOut = 0))
Variable connect threshold
1 V / 1 s
Net weight
0.45 kg
MTBF (IEC 61709, SN 29500)
> 1401000 h (40 °C)
Conductor cross section solid max.
2.5 mm²
Conductor cross section flexible max.
2.5 mm²
Standard - Electrical safety
EN 60950-1/VDE 0805 (SELV)
Test field strength
10 V/m (Test Level 3)
Input
1 kV (Test Level 2 - symmetrical)
Surge voltage load (surge)
EN 61000-4-5
Voltage
10 V (Test Level 3)
Criterion A
Normal operating behavior within the specified limits.
ECLASS 4.1
27040600
ETIM 6.0
EC000382
ETIM 7.0
EC000382
UNSPSC 7.0901
39121011
UNSPSC 21.0
39121011
EMC requirements for noise immunity
EN 61000-6-1
UL approvals
UL Listed UL 508
Frequency range
0.15 MHz ... 80 MHz
EMC requirements for noise emission
EN 61000-6-3
Electrostatic discharge
EN 61000-4-2
Discharge in air
8 kV (Test Level 3)
Comments
Criterion A
I/O/S
asymmetrical
China RoHS
Environmentally Friendly Use Period = 25;
ECLASS 5.0
27040600
ECLASS 7.0
27040603
ECLASS 6.0
27040600
UNSPSC 11
39121011
UNSPSC 6.01
30211510
UNSPSC 20.0
39121011