2878696 Phoenix Contact Programmable Logic Controllers
Part#:2878696
Manufacturer:Phoenix Contact
Product Lifecycle:Active
Get a quick Quote!
Inline, Bus coupler, Modbus/RTU, D-SUB-9 female connector, Digital inputs: 8, 24 V DC, connection method: 3-conductor, Digital outputs: 4, 24 V DC, 500 mA, connection method: 3-conductor, transmission speed in the local bus: 500 kbps / 2 Mbps, degree of p
About the manufacturer: Phoenix Contact is one of the manufacturers that offers Programmable Logic Controllers that you can order at marketplace.quotebeam.com. Phoenix Contact manufactures industrial electrical and electronic technology products that offer power, protection, connectivity, and automation for systems and equipment.
Check out the 2878696 Phoenix Contact price in the box on the right side or send a quick quote.
Product Details
- ETIM 7.0 EC001604
- Transmission speed 500 kbps / 2 Mbps (automatic detection, no combined system)
- Height 119.8 mm
- Ambient temperature (storage/transport) -40 °C ... 85 °C
- Designation Segment circuit supply (US)
- Note on weight specifications with connectors
- Connection method Inline connector
- Width 80 mm
- Permissible humidity (operation) 10 % ... 95 % (non-condensing)
- Air pressure (operation) 70 kPa ... 106 kPa (up to 3000 m above sea level)
- Net weight 316 g
- Current consumption min. 3 mA (without actuators)
- Number of supported branch terminals with remote bus branch 0
- Input name Digital inputs
- Depth 71.5 mm
- Air pressure (storage/transport) 70 kPa ... 106 kPa (up to 3000 m above sea level)
- Number of local bus devices that can be connected max. 61 (The on-board I/Os are two devices)
- Utilization restriction EMC: class A product, see manufacturer's declaration in the download area
- Ambient temperature (operation) -25 °C ... 60 °C
- Degree of protection IP20
- Mounting type DIN rail mounting
- Diagnostics messages Short-circuit or overload of the digital outputs Yes
- Number of supported devices max. 63 (per station)
- Supply voltage range 19.2 V DC ... 30 V DC (including all tolerances, including ripple)
- Description of the input EN 61131-2 type 1
- Typical response time approx. 500 µs
- Nominal input voltage UIN 24 V DC
- Nominal input current at UIN typ. 3 mA
- Nominal load, lamp 12 W
- Nominal load, ohmic 12 W
- Nominal output voltage 24 V DC
- Limitation of the voltage induced on circuit interruption approx. -30 V
- Immunity to EF Noise immunity test in accordance with EN 61000-6-2 Electromagnetic fields EN 61000-4-3/IEC 61000-4-3 Criterion A, Field intensity: 10 V/m
- Note on dimensions Specfications with connectors
- Permissible humidity (storage/transport) 10 % ... 95 % (non-condensing)
- Color green
- Number 1
- Note on the connection method Electrically isolated supply, shielding directly connected to functional ground
- Number of devices with parameter channel max. 8
- Power consumption typ. 1.7 W (entire device)
- Connection technology 3-conductor
- Input voltage range "0" signal -30 V DC ... 5 V DC
- Protective circuit Short-circuit and overload protection Freewheeling circuit in the output driver
- Output name Digital outputs
- Number of inputs 8
- Supply voltage 24 V DC (via Inline connector)
- Input voltage 24 V DC
- Input voltage range "1" signal 15 V DC ... 30 V DC
- Number of outputs 4
- Output voltage 24 V DC -1 V (At nominal current)
- Behavior with inductive overload Output can be destroyed
- ECLASS 4.0 27250200
- UNSPSC 20.0 32151602
- Power supply unit max. 8 A DC (sum of UM + US)
- UNSPSC 7.0901 43201404
- UNSPSC 13.2 32151602
- ETIM 2.0 EC001434
- UNSPSC 11 43172015
- Immunity to ESD Noise immunity test in accordance with EN 61000-6-2 Electrostatic discharge (ESD) EN 61000-4-2/IEC 61000-4-2 Criterion B, 6 kV contact discharge, 8 kV air discharge
- ECLASS 6.0 27242600
- Immunity to surge Noise immunity test in accordance with EN 61000-6-2 Transient overvoltage (surge) EN 61000-4-5/IEC 61000-4-5 Criterion B, DC supply lines: 0.5 kV/1.0 kV (symmetrical/asymmetrical), fieldbus cable shield: 1 kV
- Mechanical tests Vibration resistance in acc. with EN 60068-2-6/IEC 60068-2-6 5g
- ECLASS 5.1 27242600
- Behavior with overload Auto restart
- REACh SVHC Lead 7439-92-1
- ECLASS 5.0 27250200
- UNSPSC 6.01 43172015
- Delay at signal change from 0 to 1 1.2 ms
- Protection class III (IEC 61140, EN 61140, VDE 0140-1)
- ECLASS 4.1 27250200
- UNSPSC 12.01 43201404
- China RoHS Environmentally friendly use period: unlimited = EFUP-e
- ETIM 3.0 EC001604
- Interference emission Noise emission test as per EN 61000-6-4 Class A
- ETIM 4.0 EC001604
- UNSPSC 18.0 32151602
- Nominal load, inductive 12 VA (1.2 H, 48 Ω)
- Output current when switched off max. 10 µA (When not loaded, a voltage can be measured even at an output that is not set.)
- Delay at signal change from 1 to 0 1.2 ms
- Reverse voltage resistance to short pulses Reverse voltage proof
- ECLASS 9.0 27242608
- UNSPSC 19.0 32151602
- Immunity to burst Noise immunity test in accordance with EN 61000-6-2 Fast transients (burst) EN 61000-4-4/IEC 61000-4-4 Criterion A, all interfaces 1 kVCriterion B, all interfaces 2 kV
- ECLASS 11.0 27242608
- ETIM 6.0 EC001604
- UNSPSC 21.0 32151602
- Immunity to conducted interference Noise immunity test in accordance with EN 61000-6-2 Conducted interference EN 61000-4-6/IEC 61000-4-6 Criterion A, Test voltage 10 V
- ECLASS 10.0.1 27242608
- ECLASS 7.0 27242608
- Typical input current per channel typ. 3 mA
- Connection in acc. with standard CUL
Product condition
ORIGINAL PACKAGING
SURPLUS ORIGINAL PACKAGING - 100% unused and in original packaging
1-year warranty
Get a quick Quote!
Request a quote, and we will send you price and availability within minutes.
Select Qty:
Average response time: 11 minutes
By purchasing this item, you agree to the Terms & Conditions
Quotebeam is NOT an authorized distributor of Phoenix Contact
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Phoenix Contact Disclaimer:
The product is unused surplus. Quotebeam is not an authorized surplus dealer or affiliate for the Manufacturer of this product. Products may feature older date codes or be from an earlier series than what is currently available from the manufacturer or authorized dealers. Because Quotebeam is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Phoenix Contact Controls products will have firmware already installed, Quotebeam makes no representation as to whether a Controls product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Quotebeam also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Phoenix Contact, its distributors, or any other source. Quotebeam also makes no representations as to your right to install any such firmware on the product. Quotebeam will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Relevant products
Do you have questions?
We’re here for you ✨
We are a proud member of:
