2904601 Phoenix Contact AC/DC Power Supplies

Product Details

• Height with alternative assembly
  130 mm
• Degree of protection
  IP20
• Ambient temperature (operation)
  -25 °C ... 70 °C (> 60 °C Derating: 2.5 %/K)
• Max. permissible relative humidity (operation)
  ≤ 95 % (at 25 °C, non-condensing)
• Input voltage range
  100 V AC ... 240 V AC -15 % ... +10 %
• Input fuse
  8 A (slow-blow, internal)
• Type of protection
  Transient surge protection
• Dynamic Boost (IDyn.Boost)
  20 A (5 s)
• Control deviation
  < 0.5 % (Static load change 10 % ... 90 %)
• MTBF (IEC 61709, SN 29500)
  > 1251000 h (25 °C)
• Insulation voltage output / PE
  0.5 kV DC (type test)
• Conductor cross section solid max.
  1 mm²
• Conductor cross section AWG min.
  24
• Standard - Safe isolation
  IEC 61558-2-16 pending
• Rail applications
  EN 50121-3-2
• Electromagnetic compatibility
  Conformance with EMC Directive 2014/30/EU
• Noise emission
  EN 55016
• DNV GL noise radiation
  Class B
• Electromagnetic HF field
  EN 61000-4-3
• Output
  1 kV (Test Level 3 - symmetrical)
Power frequency magnetic field
EN 61000-4-8
Voltage dip
0 %
Test level 2
150 Hz 1.5 kHz (Test Level 4)
Test level 3
1.5 kHz 15 kHz (Test Level 4)
Attenuated oscillating wave
EN 61000-4-18
Signals (test level 1)
100 kHz 1 MHz (Test Level 3 - symmetrical)
Criterion C
Temporary adverse effects on the operating behavior, which the device corrects automatically or which can be restored by actuating the operating elements.
ECLASS 11.0
27040701
ETIM 6.0
EC002540
UNSPSC 21.0
39121004
Depth
125 mm
Ambient temperature (start-up type tested)
-40 °C
Installation height
≤ 5000 m (> 2000 m, observe derating)
Current consumption
3.4 A (100 V AC)
Mains buffering time
typ. 42 ms (120 V AC)
Inrush current
typ. 12 A (at 25 °C)
Static Boost (IStat.Boost)
12.5 A
Connection in parallel
Yes, for redundancy and increased capacity
Output power
240 W
Efficiency
typ. 92.5 % (120 V AC)
Conductor cross section solid min.
0.2 mm²
Conductor cross section AWG max.
16
EMC requirements, power plant
IEC 61850-3
Standard – Safety extra-low voltage
IEC 61010-1 (SELV)
UL approvals
UL Listed UL 508
Low Voltage Directive
Conformance with Low Voltage Directive 2014/35/EC
Conducted noise emission
EN 55016
Electrostatic discharge
EN 61000-4-2
Test field strength
110 A/m
Input
2 kV (Test Level 4 - symmetrical)
Conducted interference
EN 61000-4-6
Pulse-shape magnetic field
EN 61000-4-9
Damped oscillating magnetic field
EN 61000-4-10
Test level 4
15 kHz 150 kHz (Test Level 4)
Width
50 mm
Installation distance top/bottom
50 mm / 50 mm
Climatic class
3K3 (in acc. with EN 60721)
AC frequency range
50 Hz ... 60 Hz -10 % ... +10 %
Recommended breaker for input protection
10 A ... 16 A (Characteristic B, C, D, K or comparable)
Protective circuit/component
Varistor, gas-filled surge arrester
Setting range of the output voltage (USet)
24 V DC ... 29.5 V DC (constant capacity)
Feedback voltage resistance
≤ 35 V DC
Typical response time
300 ms (from SLEEP MODE)
Environmental protection directive
RoHS Directive 2011/65/EU
Insulation voltage input/output
4 kV AC (type test)
Mounting position
horizontal DIN rail NS 35, EN 60715
Conductor cross section flexible min.
0.2 mm²
Stripping length
8 mm
Standard - Electrical safety
IEC 61010-2-201 (SELV)
Mains variation/undervoltage
SEMI F47-0706, EN 61000-4-11
Shipbuilding approval
DNV GL, PRS, BV, LR, ABS
Harmonic currents
EN 61000-3-2
DNV GL conducted interference
Class A
Comments
Criterion A
Signal
4 kV (Test Level 4 - asymmetrical)
Frequency
50 Hz
Number of periods
0,5 / 1 / 5 / 50 / 250 periods
Test level 6
150 Hz 180 Hz (Test Level 4)
Input, output (test level 1)
100 kHz 1 MHz (Test Level 3 - symmetrical)
China RoHS
Environmentally Friendly Use Period = 25;
ECLASS 9.0
27040701
Height
130 mm
Installation distance right/left
5 mm / 5 mm
Inflammability class in acc. with UL 94 (housing / terminal blocks)
V0
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Nominal input voltage range
100 V AC ... 240 V AC
Discharge current to PE
< 3.5 mA
Nominal output voltage
24 V DC
Selective Fuse Breaking (ISFB)
60 A (15 ms)
Connection in series
yes
Protection against overvoltage at the output (OVP)
≤ 32 V DC
Power loss nominal load max.
< 20 W (120 V AC)
Net weight
0.9 kg
Assembly instructions
alignable: PN ≥50%, 5 mm horizontally, 15 mm next to active components, 50 mm verticallyalignable: PN <50%, 0 mm horizontally, 40 mm vertically top, 20 mm vertically bottom
Connection method
Push-in connection
EMC requirements for noise immunity
EN 61000-6-1
HART FSK Physical Layer Test Specification Compliance
Output voltage UOut compliant
Standard - safety for equipment for measurement, control, and laboratory use
IEC 61010-1
Standard – Limitation of mains harmonic currents
EN 61000-3-2
SIQ
BG (type approved)
Width with alternative assembly
122 mm
Depth with alternative assembly
53 mm
Degree of pollution
2
Dielectric strength maximum
300 V AC 60 s
Nominal power consumption
274 VA
Frequency range (fN)
50 Hz ... 60 Hz -10 % ... +10 %
Power factor (cos phi)
0.94
Nominal output current (IN)
10 A
Derating
> 60 °C ... 70 °C (2.5%/K)
Residual ripple
< 80 mVPP (with nominal values)
Maximum power dissipation in no-load condition
< 3 W (120 V AC)
Insulation voltage input / PE
3.5 kV AC (type test)
Protection class
I
Conductor cross section flexible max.
1.5 mm²
EMC requirements for noise emission
EN 61000-6-3
Standard - Safety of transformers
IEC 61558-2-16 pending
Standard - power supply devices for low voltage with DC output
EN 61204-3
CSA
CAN/CSA-C22.2 No. 60950-1-07
Flicker
EN 61000-3-3
Discharge in air
15 kV (Test Level 4)
Fast transients (burst)
EN 61000-4-4
Surge voltage load (surge)
EN 61000-4-5
Voltage
2.5 kV
Test level 1
15 Hz 150 Hz (Test Level 4)
Asymmetrical conducted disturbance variables
EN 61000-4-16
Input, output (test level 2)
10 MHz
Criterion A
Normal operating behavior within the specified limits.
REACh SVHC
Lead 7439-92-1
ECLASS 7.0
27049002
UNSPSC 20.0
39121004
Additional text
Test Level 2
Contact discharge
8 kV (Test Level 4)
Frequency range
50 Hz ... 60 Hz
I/O/S
asymmetrical
Voltage dips
EN 61000-4-11
Attenuated sinusoidal oscillations (ring wave)
EN 61000-4-12
Test level 7
16.7 Hz 50 Hz 60 Hz (Test Level 4)
Input, output (test level 3)
100 kHz 1 MHz (Test Level 3 - asymmetrical)
Signals (test level 2)
100 kHz 1 MHz (Test Level 3 - asymmetrical)
ECLASS 10.0.1
27040701
ECLASS 6.0
27049000
UNSPSC 18.0
39121004
Test level 5
16.7 Hz 50 Hz 60 Hz (Test Level 4)
Criterion B
Temporary impairment to operational behavior that is corrected by the device itself.
ECLASS 5.1
27242213
UNSPSC 13.2
39121004
UNSPSC 19.0
39121004