2905744 Phoenix Contact Electrical Circuit Protection & Load Centers
Part#:2905744
Manufacturer:Phoenix Contact
Product Lifecycle:Active
In-stock parts: 45
Dec 22, 2024
Multi-channel, electronic circuit breaker with active current limitation for protecting eight loads at 24 V DC in the event of overload and short circuit. With nominal current assistant and electronic locking of the set nominal currents. For installation
About the manufacturer: Phoenix Contact is one of the manufacturers that offers Electrical Circuit Protection & Load Centers that you can order at marketplace.quotebeam.com. Phoenix Contact manufactures industrial electrical and electronic technology products that offer power, protection, connectivity, and automation for systems and equipment.
Check out the 2905744 Phoenix Contact price in the box on the right side or send a quick quote.
Product Details
- Ambient temperature (storage/transport) -40 °C ... 80 °C
- Width 41 mm
- Altitude ≤ 6000 m (amsl (above mean sea level))
- Number of positions 1
- Rated surge voltage 0.5 kV
- Efficiency > 99 %
- Module initialization time 3.3 s
- Waiting time after switch off of a channel 10 s (at overload / short circuit)
- Undervoltage switch-off load circuit ≤ 17.8 V DC (active)
- Max. capacitive load load circuit 75000 µF
- Switching function N/O contact
- Stripping length 10 mm
- Conductor cross section solid 0.2 mm² ... 2.5 mm²
- Channel LED green lit (Channel switched on)
- Channel LED yellow lit (Channel switched on, channel load > 80% )
- Connection method Push-in connection
- Designation Shipbuilding approval
- Identification DNV GL
- ECLASS 10.0.1 27140401
- ECLASS 11.0 27140401
- ECLASS 7.0 27141116
- UNSPSC 20.0 39121410
- Humidity test 240 h, 95 % RH, 40 °C
- Degree of protection IP20
- Degree of pollution 2
- Measuring tolerance I typ. 40 % (0.5 A ... 1 A)
- Temperature derating 40 A DC (at 70°C (65°C for UL 2367))
- Short-circuit switching capacity 300 A
- Dielectric strength max. 30 V DC (Load circuit)
- Output voltage status output 24 V DC
- Output current status output max. 20 mA (when I > 80% at at least one channel)
- Connection name Main circuit OUT
- DC operating current 1 mA DC ... 100 mA DC
- Channel LED off off (Channel switched off)
- Channel LED red lit (Channel switched off, over- or undervoltage active)
- DC OK LED off off (No supply voltage)
- Standards/specifications EN 61000-6-2 EMC – Immunity for industrial areas
- Enclosure Required protection according to the Rules shall be provided upon installation on board
- REACh SVHC Lead 7439-92-1
- ECLASS 4.1 27141100
- ECLASS 6.0 27141100
- UNSPSC 13.2 39121410
- Height 130 mm
- Ambient temperature (operation) -25 °C ... 70 °C (Startup at -40 C type-tested)
- Mounting type DIN rail: 35 mm
- Operating voltage 18 V DC ... 30 V DC
- ETIM 7.0 EC000899
- UNSPSC 19.0 39121410
- UNSPSC 21.0 39121410
- Depth 121 mm (incl. DIN rail 7.5 mm)
- Shock (operation) 30g (IEC 60068-2-27, Test Ea)
- Color light grey RAL 7035
- Fuse type electronic
- Rated current IN max. 80 A DC (for double supply IN+ with at least 2 x 6 mm²)
- Active current limitation typ. 2.0 x IN (0.5 - 1 A)
- Fail-safe element 15 A DC (per output channel)
- Required backup fuse Only required if Imax of the power supply > the short-circuit switching capacity. Integrated failsafe element.
- MTBF (IEC 61709, SN 29500) 1304293 h (at 25 °C)
- Input voltage reset input 7 V DC ... 30 V DC (Reset with falling edge)
- Pulse length reset input ≥ 50 ms (High signal)
- Voltage reset input < 5 V DC (Low signal)
- DC operating voltage 0 V DC ... 30 V DC
- Channel LED yellow-green flashing (Channel switched on, nominal current assistant active)
- Channel LED red-yellow flashing (Channel switched on, overload mode, capacity approximately 110 ... 130% , shutdown after 30 s)
- DC OK LED green lit (Operating voltage in nominal range 18 ... 30 V)
- Temperature D
- Vibration B
- EMC A
- ECLASS 4.0 27141100
- ECLASS 5.1 27141100
- ETIM 6.0 EC000899
- Vibration (operation) 5 Hz ... 24.9 Hz (Amplitude ±1.6 mm; in accordance with IEC 60068-2-6, Test Fc)
- Flammability rating according to UL 94 V-0
- Protection class III
- Type DIN rail module, one-piece
- Rated voltage 24 V DC
- Feedback resistance max. 35 V DC
- Closed circuit current I0 typ. 50 mA
- Power dissipation 1.2 W (No-load operation)
- Tripping method E (electronic)
- Shutdown time load circuit 0.02 s (> 1.3 x IN)
- Overvoltage switch-off shutdown load circuit ≥ 30.5 V DC (active)
- Current consumption reset input typ. 0.4 mA (at 24 V DC)
- Conductor cross section AWG 24 ... 12
- Conductor cross section flexible, with ferrule without plastic sleeve 0.25 mm² ... 2.5 mm²
- Conductor cross section, flexible, with ferrule, with plastic sleeve 0.25 mm² ... 1.5 mm²
- DC OK LED yellow lit (Undervoltage active, voltage ≤ 17.8 V, active channels switched off and channel LEDs are lit red)
- Channel LED red-green flashing (Channel switched off, programming mode active, current adjustment after overload or short-circuit release)
- DC OK LED red lit (Overvoltage switch-off active, voltage ≥ 30.5 V, channels switched off and channel LEDs are lit red)
- Humidity B
- China RoHS Environmentally friendly use period: unlimited = EFUP-e
- ECLASS 5.0 27141100
- ECLASS 9.0 27141116
- UNSPSC 18.0 39121410
Product condition
ORIGINAL PACKAGING
SURPLUS ORIGINAL PACKAGING - 100% unused and in original packaging
This item can ship within 5 days!
1-year warranty
$413.77
Stock:
45
Select Qty:
$413.77
$413.77 each
By purchasing this item, you agree to the Terms & Conditions
Quotebeam is NOT an authorized distributor of Phoenix Contact
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Phoenix Contact Disclaimer:
The product is unused surplus. Quotebeam is not an authorized surplus dealer or affiliate for the Manufacturer of this product. Products may feature older date codes or be from an earlier series than what is currently available from the manufacturer or authorized dealers. Because Quotebeam is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Phoenix Contact Controls products will have firmware already installed, Quotebeam makes no representation as to whether a Controls product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Quotebeam also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Phoenix Contact, its distributors, or any other source. Quotebeam also makes no representations as to your right to install any such firmware on the product. Quotebeam will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Relevant products
Do you have questions?
We’re here for you ✨
We are a proud member of:
