2906994 Phoenix Contact UPS (DC)
Part#:2906994
Manufacturer:Phoenix Contact
Product Lifecycle:Active
In-stock parts: 263
Dec 22, 2024
QUINT UPS with IQ Technology, RJ45 communication interfaces (EtherNet/IP™), for DIN rail mounting, input: 24 V DC, output: 24 V DC / 5 A, charging current: 1.5 A
About the manufacturer: Phoenix Contact is one of the manufacturers that offers UPS (DC) that you can order at marketplace.quotebeam.com. Phoenix Contact manufactures industrial electrical and electronic technology products that offer power, protection, connectivity, and automation for systems and equipment.
Check out the 2906994 Phoenix Contact price in the box on the right side or send a quick quote.
Product Details
- Weight0.5 kg
- Depth 125 mm
- UPS connection in parallel no
- Output voltage range 19 V DC ... 32 V DC (UOUT = UBAT - 0.3 V DC)
- Height with alternative assembly 130 mm
- Installation distance top/bottom (passive) 40 mm / 20 mm (POut ≥50% )
- Ambient temperature (start-up type tested) -40 °C
- Climatic class 3K3 (EN 60721)
- Input voltage range 18 V DC ... 30 V DC
- Internal input fuse no
- Switch-on time max. 3 s
- End-of-charge voltage (temperature-compensated) 25 V DC ... 32 V DC
- Nominal capacity (without additional charger) 0.8 Ah ... 30 Ah
- Life expectancy (electrolytic capacitors) 224011 h
- Conductor cross section solid min. 0.2 mm²
- Single conductor/terminal point, stranded, with ferrule, min. 0.2 mm²
- Installation distance right/left (active) 5 mm / 5 mm (POut ≥50% )
- Ambient temperature (operation) -25 °C ... 70 °C (> 60 °C Derating: 2.5 %/K)
- Degree of pollution 2
- Fixed backup threshold 22 V DC
- Switch-over time 0 ms
- Energy storage device connection in series no
- Charging time 2.5 h (3.4 Ah)
- Width 35 mm
- Depth with alternative assembly 37 mm
- Installation distance top/bottom (active) 50 mm / 50 mm (POut ≥50% )
- Ambient temperature (storage/transport) -40 °C ... 85 °C
- Input voltage 24 V DC
- Identification IEC 61010-1
- Charge characteristic curve IU0U
- Temperature sensor yes
- Connection method Screw connection
- Conductor cross section flexible min. 0.2 mm²
- Single conductor/terminal point, stranded, with ferrule, max. 2.5 mm²
- Standard designation Safety extra-low voltage
- Low Voltage Directive Conformance with Low Voltage Directive 2014/35/EC
- Discharge in air 15 kV (Test Level 4)
- Fast transients (burst) EN 61000-4-4
- Signal 1 kV (Test Level 2 - asymmetrical)
- Power frequency magnetic field EN 61000-4-8
- Frequency 0 Hz
- ECLASS 5.1 27242213
- UNSPSC 21.0 39121011
- Installation distance right/left (active, passive) 0 mm / 0 mm (POut ≤50 %)
- Degree of protection IP20
- Voltage drop, input/output 0.3 V DC
- UPS connection in series no
- Static Boost (IStat.Boost) 6.25 A
- End-of-charge voltage 32 V DC
- IQ-Technology yes
- Environmental protection directive RoHS Directive 2011/65/EU
- Conductor cross section flexible max. 2.5 mm²
- Conductor cross section AWG max. 12
- Stripping length 6.5 mm
- Installation distance right/left (passive) 0 mm / 0 mm (POut ≥50% )
- Installation height ≤ 4000 m
- Energy storage device connection in parallel Yes, 5 (observe line protection)
- Dynamic Boost (IDyn.Boost) 10 A (5 s)
- Battery technology VRLA, VRLA-WTR, LI-ION
- Max. capacity 40 Ah
- MTBF (IEC 61709, SN 29500) > 1189000 h (25 °C)
- Tightening torque max 0.6 Nm
- EMC requirements for noise immunity EN 61000-6-1
- Electromagnetic compatibility Conformance with EMC Directive 2014/30/EU
- Electromagnetic HF field EN 61000-4-3
- Voltage 10 V (Test Level 3)
- Criterion B Temporary impairment to operational behavior that is corrected by the device itself.
- Height 130 mm
- Inflammability class in acc. with UL 94 (housing / terminal blocks) V0
- Max. permissible relative humidity (operation) ≤ 95 % (at 25 °C, non-condensing)
- Reverse polarity protection yes
- No-load proof yes
- Charging current (configurable) max. 1.5 A
- Buffer time 25 min. (3.4 Ah)
- Tightening torque, min 0.5 Nm
- Designation CB scheme
- Contact discharge 8 kV (Test Level 4)
- Test field strength 300 A/m
- Conducted interference EN 61000-4-6
- Additional text DC, 60 s
- REACh SVHC Lead 7439-92-1
- ECLASS 9.0 27040705
- UNSPSC 13.2 39121004
- UNSPSC 20.0 39121011
- Width with alternative assembly 123 mm
- Installation distance top/bottom (active, passive) 40 mm / 20 mm (POut ≤50 %)
- Electric strength, max. 35 V DC (Protected against polarity reversal)
- Inrush current ≤ 7 A (≤ 4 ms)
- Short-circuit-proof yes
- Efficiency typ. 97 %
- Selective Fuse Breaking (ISFB) 30 A (15 ms)
- Temperature compensation (configurable) 42 mV/K
- Conductor cross section solid max. 2.5 mm²
- Conductor cross section AWG min. 30
- EMC requirements for noise emission EN 61000-6-3
- Standards/regulations IEC 61010-1 (SELV)
- Electrostatic discharge EN 61000-4-2
- Output 1 kV (Test Level 3 - symmetrical)
- Surge voltage load (surge) EN 61000-4-5
- I/O/S asymmetrical
- ECLASS 10.0.1 27040705
- ETIM 7.0 EC000382
- UNSPSC 19.0 39121011
- Frequency range 50 Hz ... 60 Hz
- Comments Criterion A
- Input 1 kV (Test Level 3 - symmetrical)
- Criterion A Normal operating behavior within the specified limits.
- ECLASS 11.0 27040705
- ETIM 6.0 EC000382
- UNSPSC 18.0 39121011
Product condition
ORIGINAL PACKAGING
SURPLUS ORIGINAL PACKAGING - 100% unused and in original packaging
This item can ship within 24h!
1-year warranty
$441.46
Stock:
263
Select Qty:
$441.46
$441.46 each
By purchasing this item, you agree to the Terms & Conditions
Quotebeam is NOT an authorized distributor of Phoenix Contact
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Phoenix Contact Disclaimer:
The product is unused surplus. Quotebeam is not an authorized surplus dealer or affiliate for the Manufacturer of this product. Products may feature older date codes or be from an earlier series than what is currently available from the manufacturer or authorized dealers. Because Quotebeam is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Phoenix Contact Controls products will have firmware already installed, Quotebeam makes no representation as to whether a Controls product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Quotebeam also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Phoenix Contact, its distributors, or any other source. Quotebeam also makes no representations as to your right to install any such firmware on the product. Quotebeam will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Relevant products
Do you have questions?
We’re here for you ✨