2907076 Phoenix Contact UPS (DC)
Part#:2907076
Manufacturer:Phoenix Contact
Product Lifecycle:Active
Get a quick Quote!
QUINT UPS with IQ Technology, RJ45 communication interfaces (EtherCAT®), for DIN rail mounting, input: 24 V DC, output: 24 V DC / 20 A, charging current: 5 A
About the manufacturer: Phoenix Contact is one of the manufacturers that offers UPS (DC) that you can order at marketplace.quotebeam.com. Phoenix Contact manufactures industrial electrical and electronic technology products that offer power, protection, connectivity, and automation for systems and equipment.
Check out the 2907076 Phoenix Contact price in the box on the right side or send a quick quote.
Product Details
- Weight0.6 kg
- Height 130 mm
- Depth with alternative assembly 42 mm
- Installation distance top/bottom (active, passive) 40 mm / 20 mm (POut ≤50 %)
- Max. permissible relative humidity (operation) ≤ 95 % (at 25 °C, non-condensing)
- Installation height ≤ 4000 m
- Reverse polarity protection yes
- Fixed backup threshold 22 V DC
- Switch-over time 0 ms
- Width 40 mm
- Installation distance right/left (active) 5 mm / 5 mm (POut ≥50% )
- Ambient temperature (start-up type tested) -40 °C
- Climatic class 3K3 (EN 60721)
- Short-circuit-proof yes
- Efficiency typ. 97 %
- End-of-charge voltage (temperature-compensated) 25 V DC ... 32 V DC
- Charging time 202.5 h
- MTBF (IEC 61709, SN 29500) > 1172000 h (25 °C)
- Single conductor/terminal point, stranded, with ferrule, max. 4 mm²
- Tightening torque max 0.6 Nm
- Designation CB scheme
- Test field strength 300 A/m
- Signal 1 kV (Test Level 2 - asymmetrical)
- Surge voltage load (surge) EN 61000-4-5
- Criterion B Temporary impairment to operational behavior that is corrected by the device itself.
- ECLASS 5.1 27242213
- UNSPSC 19.0 39121011
- Installation distance right/left (passive) 0 mm / 0 mm (POut ≥50% )
- Height with alternative assembly 130 mm
- Degree of protection IP20
- Degree of pollution 2
- Input voltage range 18 V DC ... 30 V DC
- Electric strength, max. 35 V DC
- UPS connection in parallel no
- Energy storage device connection in parallel Yes, 5 (observe line protection)
- Dynamic Boost (IDyn.Boost) 30 A (5 s)
- Nominal capacity (without additional charger) 3 Ah ... 100 Ah
- Charge characteristic curve IU0U
- Life expectancy (electrolytic capacitors) 192072 h
- Conductor cross section solid min. 0.2 mm²
- Conductor cross section flexible min. 0.2 mm²
- Stripping length 6.5 mm
- EMC requirements for noise immunity EN 61000-6-1
- Electromagnetic compatibility Conformance with EMC Directive 2014/30/EU
- Low Voltage Directive Conformance with Low Voltage Directive 2014/35/EC
- Input 1 kV (Test Level 3 - symmetrical)
- Conducted interference EN 61000-4-6
- Depth 125 mm
- Installation distance top/bottom (passive) 40 mm / 20 mm (POut ≥50% )
- Ambient temperature (storage/transport) -40 °C ... 85 °C
- Internal input fuse no
- Voltage drop, input/output 0.4 V DC
- Output voltage range 19 V DC ... 32 V DC
- Switch-on time max. 3 s
- No-load proof yes
- Battery technology VRLA, VRLA-WTR, LI-ION
- Charging current (configurable) 5 A
- Buffer time 19 min. (12 Ah)
- Environmental protection directive RoHS Directive 2011/65/EU
- Single conductor/terminal point, stranded, with ferrule, min. 0.2 mm²
- Conductor cross section AWG max. 12
- Conductor cross section AWG min. 30
- Identification IEC 61010-1
- Comments Criterion A
- Output 1 kV (Test Level 3 - symmetrical)
- I/O/S asymmetrical
- ECLASS 9.0 27040705
- Installation distance top/bottom (active) 50 mm / 50 mm (POut ≥50% )
- Energy storage device connection in series no
- Selective Fuse Breaking (ISFB) 120 A (15 ms)
- Max. capacity 135 Ah
- Deep discharge protection 19.2 V DC
- Conductor cross section solid max. 2.5 mm²
- Discharge in air 15 kV (Test Level 4)
- Frequency range 50 Hz ... 60 Hz
- Additional text DC, 60 s
- REACh SVHC Lead 7439-92-1
- ETIM 6.0 EC000382
- UNSPSC 20.0 39121011
- UNSPSC 21.0 39121011
- Inflammability class in acc. with UL 94 (housing / terminal blocks) V0
- Inrush current ≤ 8 A (≤ 4 ms)
- UPS connection in series no
- End-of-charge voltage 32 V DC
- Temperature sensor yes
- Tightening torque, min 0.5 Nm
- EMC requirements for noise emission EN 61000-6-3
- Standards/regulations IEC 61010-1 (SELV)
- Contact discharge 8 kV (Test Level 4)
- Fast transients (burst) EN 61000-4-4
- Frequency 0 Hz
- Criterion A Normal operating behavior within the specified limits.
- ECLASS 10.0.1 27040705
- Width with alternative assembly 123 mm
- Installation distance right/left (active, passive) 0 mm / 0 mm (POut ≤50 %)
- Ambient temperature (operation) -25 °C ... 70 °C (> 60 °C Derating: 2.5 %/K)
- Input voltage 24 V DC
- Static Boost (IStat.Boost) 25 A
- Temperature compensation (configurable) 42 mV/K
- IQ-Technology yes
- Connection method Screw connection
- Conductor cross section flexible max. 2.5 mm²
- Standard designation Safety extra-low voltage
- Electrostatic discharge EN 61000-4-2
- Electromagnetic HF field EN 61000-4-3
- Voltage 10 V (Test Level 3)
- Power frequency magnetic field EN 61000-4-8
- ECLASS 11.0 27040705
- ETIM 7.0 EC000382
- UNSPSC 13.2 39121004
- UNSPSC 18.0 39121011
Product condition
ORIGINAL PACKAGING
SURPLUS ORIGINAL PACKAGING - 100% unused and in original packaging
1-year warranty
Get a quick Quote!
Request a quote, and we will send you price and availability within minutes.
Select Qty:
Average response time: 11 minutes
By purchasing this item, you agree to the Terms & Conditions
Quotebeam is NOT an authorized distributor of Phoenix Contact
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Phoenix Contact Disclaimer:
The product is unused surplus. Quotebeam is not an authorized surplus dealer or affiliate for the Manufacturer of this product. Products may feature older date codes or be from an earlier series than what is currently available from the manufacturer or authorized dealers. Because Quotebeam is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Phoenix Contact Controls products will have firmware already installed, Quotebeam makes no representation as to whether a Controls product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Quotebeam also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Phoenix Contact, its distributors, or any other source. Quotebeam also makes no representations as to your right to install any such firmware on the product. Quotebeam will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Relevant products
Do you have questions?
We’re here for you ✨