2907081 Phoenix Contact UPS (DC)

Product Details

• Weight0.7 kg
• UPS connection in parallel
  no
• Depth
  125 mm
• Installation distance right/left (active, passive)
  0 mm / 0 mm (POut ≤50 %)
• Installation distance top/bottom (passive)
  40 mm / 20 mm (POut ≥50% )
• Ambient temperature (operation)
  -25 °C ... 70 °C (> 60 °C Derating: 2.5 %/K)
• UPS connection in series
  no
• Height with alternative assembly
  130 mm
• Degree of protection
  IP20
• Climatic class
  3K3 (EN 60721)
• Inrush current
  ≤ 9 A (≤ 4 ms)
• Fixed backup threshold
  22 V DC
• Width
  47 mm
• Depth with alternative assembly
  49 mm
• Installation distance top/bottom (active)
  50 mm / 50 mm (POut ≥50% )
• Ambient temperature (start-up type tested)
  -40 °C
• Installation height
  ≤ 4000 m
• Degree of pollution
  2
• Voltage drop, input/output
  0.5 V DC
• No-load proof
  yes
Efficiency
typ. 97 %
Nominal capacity (without additional charger)
7 Ah ... 100 Ah
Battery technology
VRLA, VRLA-WTR, LI-ION
Deep discharge protection
19.2 V DC
Conductor cross section solid max.
2.5 mm²
Stripping length
6.5 mm
Tightening torque max
0.6 Nm
Low Voltage Directive
Conformance with Low Voltage Directive 2014/35/EC
Electromagnetic HF field
EN 61000-4-3
Comments
Criterion A
Surge voltage load (surge)
EN 61000-4-5
Frequency
0 Hz
ECLASS 10.0.1
27040705
UNSPSC 13.2
39121004
Height
130 mm
Installation distance right/left (active)
5 mm / 5 mm (POut ≥50% )
Inflammability class in acc. with UL 94 (housing / terminal blocks)
V0
Input voltage
24 V DC
Reverse polarity protection
yes
Switch-over time
0 ms
Dynamic Boost (IDyn.Boost)
60 A (5 s)
End-of-charge voltage (temperature-compensated)
25 V DC ... 32 V DC
Charging current (configurable)
5 A
Temperature compensation (configurable)
42 mV/K
Identification
IEC 61010-1
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Input voltage range
18 V DC ... 30 V DC
Switch-on time
max. 3 s
Energy storage device connection in parallel
Yes, 5 (observe line protection)
Output voltage range
19 V DC ... 32 V DC
Static Boost (IStat.Boost)
45 A
Max. capacity
135 Ah
IQ-Technology
yes
Connection method
Screw connection
Conductor cross section flexible max.
2.5 mm²
ECLASS 5.1
27242213
Electric strength, max.
35 V DC
Short-circuit-proof
yes
Energy storage device connection in series
no
Selective Fuse Breaking (ISFB)
215 A (15 ms)
Charge characteristic curve
IU0U
MTBF (IEC 61709, SN 29500)
> 1151000 h (25 °C)
Temperature sensor
yes
Conductor cross section AWG max.
12
Installation distance top/bottom (active, passive)
40 mm / 20 mm (POut ≤50 %)
Buffer time
45 min. (38 Ah)
Conductor cross section flexible min.
0.2 mm²
Standard designation
Safety extra-low voltage
Designation
CB scheme
UNSPSC 21.0
39121011
Width with alternative assembly
123 mm
Charging time
202.5 h
Conductor cross section solid min.
0.2 mm²
Single conductor/terminal point, stranded, with ferrule, min.
0.5 mm²
EMC requirements for noise immunity
EN 61000-6-1
EMC requirements for noise emission
EN 61000-6-3
Frequency range
50 Hz ... 60 Hz
Output
1 kV (Test Level 3 - symmetrical)
I/O/S
asymmetrical
Additional text
DC, 60 s
Criterion B
Temporary impairment to operational behavior that is corrected by the device itself.
Max. permissible relative humidity (operation)
≤ 95 % (at 25 °C, non-condensing)
Internal input fuse
no
Life expectancy (electrolytic capacitors)
126720 h
Contact discharge
8 kV (Test Level 4)
Input
1 kV (Test Level 3 - symmetrical)
Signal
1 kV (Test Level 2 - asymmetrical)
ECLASS 11.0
27040705
ETIM 7.0
EC000382
Installation distance right/left (passive)
0 mm / 0 mm (POut ≥50% )
Single conductor/terminal point, stranded, with ferrule, max.
16 mm²
Standards/regulations
IEC 61010-1 (SELV)
Discharge in air
15 kV (Test Level 4)
Power frequency magnetic field
EN 61000-4-8
Voltage
10 V (Test Level 3)
UNSPSC 19.0
39121011
End-of-charge voltage
32 V DC
Environmental protection directive
RoHS Directive 2011/65/EU
Conductor cross section AWG min.
30
Tightening torque, min
0.5 Nm
Electrostatic discharge
EN 61000-4-2
Fast transients (burst)
EN 61000-4-4
Conducted interference
EN 61000-4-6
Criterion A
Normal operating behavior within the specified limits.
ECLASS 9.0
27040705
UNSPSC 20.0
39121011
Electromagnetic compatibility
Conformance with EMC Directive 2014/30/EU
Test field strength
300 A/m
REACh SVHC
Lead 7439-92-1
ETIM 6.0
EC000382
UNSPSC 18.0
39121011