2907161 Phoenix Contact UPS (DC)

Product Details

• Depth with alternative assembly
  68 mm
• Degree of protection
  IP20
• Max. permissible relative humidity (operation)
  ≤ 93 % (At +25°C, non-condensing)
• Climatic class
  3K3 (in acc. with EN 60721)
• Mains buffering time
  ≥ 25 ms (120 V AC)
• Derating
  > 60 °C (2.5%/K of POut nom.)
• Width
  68 mm
• Installation distance right/left
  0 mm / 0 mm
• Inflammability class in acc. with UL 94 (housing / terminal blocks)
  V0
• Ambient temperature (operation)
  -25 °C ... 70 °C (> 60 °C Derating: 2.5 %/K)
• AC input voltage range
  100 V AC ... 240 V AC -15 % ... +10 %
• Nominal output voltage
  24 V DC
• Setting range of the output voltage (USet)
  24 V DC ... 28 V DC (> 24 V constant capacity)
• Feedback voltage resistance
  ≤ 35 V DC
• Connection method
  Push-in connection
• Conductor cross section AWG max.
  16
• Standard – Safety extra-low voltage
  IEC 61010 (SELV) / (PELV)
• Electromagnetic compatibility
  Conformance with EMC Directive 2014/30/EU
• Discharge in air
  8 kV (Test Level 4)
• Test field strength
  10 V/m (Test Level 3)
Conducted interference
EN 61000-4-6
Attenuated sinusoidal oscillations (ring wave)
EN 61000-4-12
ECLASS 9.0
27040705
Height
130 mm
Height with alternative assembly
130 mm
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Typical response time
200 ms
Dynamic Boost (IDyn.Boost)
15 A
Maximum power dissipation in no-load condition
< 3 W (230 V AC)
Residual ripple
< 20 mV
MTBF (IEC 61709, SN 29500)
> 2007013 h (230 V AC, at 25 °C)
Protection class
I
Conductor cross section solid min.
0.2 mm²
Stripping length
8 mm
EMC requirements for noise immunity
EN 61000-6-1
Standard - power supply devices for low voltage with DC output
EN 61204-3
Low Voltage Directive
Conformance with Low Voltage Directive 2014/35/EC
DNV GL noise radiation
Class B
Contact discharge
6 kV (Test Level 4)
Fast transients (burst)
EN 61000-4-4
Surge voltage load (surge)
EN 61000-4-5
ECLASS 11.0
27040705
Width with alternative assembly
160 mm
Degree of pollution
2
Inrush current limiting/I²t
< 0.2 A2s
Input fuse, integrated
6.3 A (slow-blow, internal)
Efficiency
typ. 90 % (120 V AC)
Surge protection against internal surge voltages
< 30 V DC
Assembly instructions
alignable: horizontally 0 mm, vertically 50 mm
Conductor cross section flexible max.
1.5 mm²
Conductor cross section AWG min.
24
Charge current
0.2 A ... 3 A (-25 °C ... 60 °C)
Conducted noise emission
EN 61000-6-3 (Class B)
Additional text
Bridge and deck area
Electromagnetic HF field
EN 61000-4-3
Input
2 kV (Test Level 3 - symmetrical)
Criterion A
Normal operating behavior within the specified limits.
Criterion B
Temporary impairment to operational behavior that is corrected by the device itself.
Depth
160 mm
Installation distance top/bottom
50 mm / 50 mm
Ambient temperature (start-up type tested)
-40 °C
Installation height
≤ 4000 m (> 2000 m, observe derating)
Nominal output current (IN)
10 A
Control deviation
< 0.55 % (Static load change 10 % ... 90 %)
Insulation voltage input/output
4 kV AC (type test)
Conductor cross section solid max.
1.5 mm²
Charge characteristic curve
IU0U
Standard - safety for equipment for measurement, control, and laboratory use
IEC 61010-1
Noise emission
EN 61000-6-3 (Class B)
Electrostatic discharge
EN 61000-4-2
Comments
Criterion A
Output
1 kV (Test Level 1 - symmetrical)
Voltage
10 V (Test Level 3)
ECLASS 10.0.1
27040705
ETIM 6.0
EC000382
Connection in parallel
yes, with diode module uncoupled
Net weight
1.34 kg
Mounting position
horizontal DIN rail NS 35, EN 60715
Conductor cross section flexible min.
0.2 mm²
EMC requirements for noise emission
EN 61000-6-3
Standard - Safe isolation
DIN VDE 0100-410
UL approvals
UL Listed UL 61010
DNV GL conducted interference
Class B
Frequency range
0.15 MHz ... 80 MHz
Signal
1 kV (Test Level 2 - asymmetrical)
I/O/S
asymmetrical
REACh SVHC
Lead 7439-92-1
ETIM 7.0
EC000382