2907379 Phoenix Contact Redundancy Modules

Product Details

• Width
  41 mm
• Degree of protection
  IP20
• Max. permissible relative humidity (operation)
  ≤ 95 % (at 25 °C, non-condensing)
• Nominal input voltage range
  12 V DC ... 24 V DC
• Protection class
  III
• Conductor cross section solid min.
  0.2 mm²
• Conductor cross section flexible max.
  2.5 mm²
• EMC requirements for noise emission
  EN 61000-6-3
• Electrostatic discharge
  EN 61000-4-2
• Fast transients (burst)
  EN 61000-4-4
• Surge voltage load (surge)
  EN 61000-4-5
• Voltage dips
  EN 61000-4-11
• ECLASS 4.0
  27250300
• ETIM 6.0
  EC002540
• UNSPSC 19.0
  32151504
• Depth
  115 mm
• Inflammability class in acc. with UL 94 (housing / terminal blocks)
  V0
• Nominal input current
  2x 20 A (-25 °C ... 60 °C)
• Connection in series
  No
• Efficiency
  > 97 %
Connection method
Screw connection
Conductor cross section solid max.
2.5 mm²
Screw thread
M3
UL approvals
UL/C-UL listed UL 508
Electromagnetic HF field
EN 61000-4-3
Input
1 kV (Test Level 3 - symmetrical)
I/O/S
asymmetrical
Criterion A
Normal operating behavior within the specified limits.
ECLASS 5.1
27371000
UNSPSC 13.2
39121004
Installation distance top/bottom
50 mm / 50 mm
Climatic class
3K3 (in acc. with EN 60721)
Maximum input current
2x 25 A (-25°C ... 40°C)
Power loss nominal load max.
10 W (IOUT = 20 A)
Mounting position
horizontal DIN rail NS 35, EN 60715
Stripping length
8 mm
Standard – Electronic equipment for use in electrical power installations and their assembly into electrical power installations
EN 50178/VDE 0160 (PELV)
Frequency range
0.15 MHz ... 80 MHz
Test field strength
10 V/m
Output
1 kV (Test Level 2 - symmetrical)
Criterion B
Temporary impairment to operational behavior that is corrected by the device itself.
ECLASS 4.1
27250300
ECLASS 9.0
27371010
UNSPSC 20.0
32151504
Installation distance right/left
0 mm / 0 mm
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Input voltage range
10 V DC ... 30 V DC
Nominal output current (IN)
40 A
Net weight
0.4 kg
Assembly instructions
alignable: horizontally 0 mm, vertically 50 mm
Conductor cross section AWG min.
24
EMC requirements for noise immunity
EN 61000-6-1
Electromagnetic compatibility
Conformance with EMC Directive 2014/30/EU
Low Voltage Directive
Conformance with Low Voltage Directive 2014/35/EC
Contact discharge
4 kV (Test Level 3)
Voltage
10 V (Test Level 3)
ECLASS 10.0.1
27371010
ECLASS 5.0
27371000
ECLASS 7.0
27371010
UNSPSC 21.0
32151504
Height
130 mm
Ambient temperature (operation)
-25 °C ... 70 °C (> 60 °C Derating: 2.5 %/K)
Degree of pollution
2
Derating
60 °C ... 70 °C (2.5%/K)
MTBF (IEC 61709, SN 29500)
82870031 h (25 °C)
Conductor cross section flexible min.
0.2 mm²
Conductor cross section AWG max.
14
Standard - Electrical safety
IEC 60950-1/VDE 0805 (SELV)
Standard – Safety extra-low voltage
IEC 60950-1 (SELV) and EN 60204-1 (PELV)
Discharge in air
8 kV (Test Level 3)
Comments
Criterion A
Conducted interference
EN 61000-4-6
ECLASS 11.0
27371010
ECLASS 6.0
27371000
ETIM 7.0
EC002540
UNSPSC 18.0
32151504