2908699 Phoenix Contact Electrical Safety Devices
Part#:2908699
Manufacturer:Phoenix Contact
Product Lifecycle:Active
Get a quick Quote!
Hybrid motor starter as an alternative to a conventional reversing contactor. Reverses 3~ AC motors up to 3 A, provides motor protection and emergency stop up to SIL 3/PL e. Group shut-down, supply, and relay extension possible via DIN rail connector.
About the manufacturer: Phoenix Contact is one of the manufacturers that offers Electrical Safety Devices that you can order at marketplace.quotebeam.com. Phoenix Contact manufactures industrial electrical and electronic technology products that offer power, protection, connectivity, and automation for systems and equipment.
Check out the 2908699 Phoenix Contact price in the box on the right side or send a quick quote.
Product Details
- Width 22.5 mm
- Maximum altitude ≤ 2000 m
- Type of protection Reverse polarity protection
- Rated actuating voltage UC 24 V DC
- Switching level < 5 V DC (For EMERGENCY STOP)
- Conductor cross section AWG 24 ... 14
- Insulation Safe isolation (IEC 60947-1) in the auxiliary circuit ≤ 300 V AC
- Additional text Safe shutdown
- Group installation 20 A (class RK5, SCCR 5kA (480 V AC), #24 - 14 AWG max. solid and stranded)
- ECLASS 5.1 27024000
- ETIM 4.0 EC001037
- UNSPSC 13.2 25173902
- Ambient temperature (operation) -25 °C ... 55 °C
- Rated control circuit supply voltage US 24 V DC
- Input name Control input: right/left and enable input
- Switching threshold 9.6 V (“0” signal)
- Rated operating current Ie 3 A (AC-51)
- Cooling time 20 min. (for auto reset)
- Response time < 0.5 s
- Assembly instructions alignable, for spacing see derating
- Minimum power dissipation 0.88 W
- Connection method Screw connection
- Screw thread M3
- Torque 0.5 Nm ... 0.6 Nm
- Designation Category (ISO 13849)
- FLA 3 A (480 V AC)
- China RoHS Environmentally Friendly Use Period = 50 years
- ECLASS 10.0.1 27370905
- ECLASS 6.0 27024000
- ETIM 3.0 EC001037
- UNSPSC 20.0 25173902
- Degree of protection IP20
- Note Confirmation: floating change-over contact, signal contact
- Typical turn-off time < 30 ms
- Rated operating voltage Ue 500 V AC
- Leakage current 0 mA
- Switching frequency ≤ 2 Hz (Load-dependent)
- Mounting type DIN rail mounting
- Mounting position vertical (horizontal DIN rail, motor output below)
- Indication Red LED
- Conductor cross section flexible 0.2 mm² ... 2.5 mm²
- Rated insulation voltage 550 V
- Overvoltage category III
- Identification ≤ 3
- ECLASS 11.0 27370905
- ECLASS 7.0 27024002
- ECLASS 9.0 27370905
- ETIM 7.0 EC001037
- UNSPSC 21.0 25173902
- Depth 114 mm
- Rated control supply current IS 60 mA
- Rated actuating current IC 7 mA
- Output name Acknowledge output
- Load current range 180 mA ... 3 A
- Trigger characteristic in acc. with IEC 60947-4-2 Class 10
- Contact type 1 changeover contact
- Maximum power dissipation 4.1 W
- Status display Yellow LED
- Connection name Load circuit
- Rated surge voltage 6 kV
- Standards/regulations EN 60947-1
- SCCR 100 kA (480 V AC (fuse: 30 A class CC/30 A class J (high fault)))
- Horsepower ratings 0.5 hp (208 V AC)
- ECLASS 4.0 27021100
- ECLASS 5.0 27024000
- ETIM 6.0 EC001037
- UNSPSC 18.0 25173902
- Height 107 mm
- Ambient temperature (storage/transport) -40 °C ... 80 °C
- Control supply voltage range 19.2 V DC ... 30 V DC
- Triggering voltage range 19.2 V DC ... 30 V DC
- Operating voltage range 42 V AC ... 550 V AC
- Mains frequency 50/60 Hz
- Switching capacity according to IEC 60947-5-1 2 A (24 V, DC13)
- Operate threshold > 33 A
- Operating mode 100% operating factor
- Operating voltage display Green LED
- Stripping length 8 mm
- Conductor cross section solid 0.2 mm² ... 2.5 mm²
- Degree of pollution 2
- Certificate NLDX.E228652
- Category code NLDX / NRNT
- REACh SVHC Lead 7439-92-1
- ECLASS 4.1 27021100
- ETIM 2.0 EC001037
- UNSPSC 19.0 25173902
Product condition
ORIGINAL PACKAGING
SURPLUS ORIGINAL PACKAGING - 100% unused and in original packaging
1-year warranty
Get a quick Quote!
Request a quote, and we will send you price and availability within minutes.
Select Qty:
Average response time: 11 minutes
By purchasing this item, you agree to the Terms & Conditions
Quotebeam is NOT an authorized distributor of Phoenix Contact
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Phoenix Contact Disclaimer:
The product is unused surplus. Quotebeam is not an authorized surplus dealer or affiliate for the Manufacturer of this product. Products may feature older date codes or be from an earlier series than what is currently available from the manufacturer or authorized dealers. Because Quotebeam is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Phoenix Contact Controls products will have firmware already installed, Quotebeam makes no representation as to whether a Controls product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Quotebeam also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Phoenix Contact, its distributors, or any other source. Quotebeam also makes no representations as to your right to install any such firmware on the product. Quotebeam will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Relevant products
Do you have questions?
We’re here for you ✨
We are a proud member of:
