2910122 Phoenix Contact DC/DC Converters

Product Details

• Weight0.6 kg
• Degree of pollution
  2
• Mains buffering
  typ. 17 ms (24 V DC)
• Input fuse
  15 A (slow-blow, internal)
• Type test (IEC/EN 60950-1) B
  4 kV DC
• Type test (IEC/EN 60950-1) C
  0.5 kV DC
• Production test C
  0.5 kV DC
• Conductor cross section flexible
  0.2 mm² ... 1.5 mm²
• Nominal output voltage (UN)
  12 V DC
• Selective Fuse Breaking (ISFB)
  48 A (15 ms)
• System deviation, dynamic
  < 3 % (Dynamic load change 10 % ... 90 %, 10 Hz)
• Residual ripple
  < 13 mVPP
• Protection against overvoltage at the output (OVP)
  ≤ 18 V DC
• Connection labeling
  3.4 +
• Maximum contact load
  24 V DC
• Reference potential
  to OUT1, OUT2, REM
• Degree of protection
  IP20
• Side element version
  Aluminum
• Depth
  125 mm
• Ambient temperature (start-up type tested)
  -40 °C
Shock
18 ms, 30g, in each space direction (according to IEC 60068-2-27)
Electric strength, max.
35 V DC (60 s)
Switch-on time
< 1 s
Insulation voltage input/output
4 kV DC (type test)
Connection method
Push-in connection
Stripping length
8 mm
Conductor cross section AWG
24 ... 16
Magnetic circuit breaker tripping
A1 ... A6 / B2 ... B6 / Z1 ... Z6
Short-circuit-proof
yes
Connection in series
yes
UIn
> 0.8 x UInNom (LED off)
Digital
0 V DC
Output current
8 A
Time
422000 h
Protection class
Special with SELV input and output
Width
36 mm
Height
130 mm
Depth with alternative assembly
39 mm
Power dissipation SLEEP MODE
< 1 W
Max. permissible relative humidity (operation)
≤ 95 % (at 25 °C, non-condensing)
Overvoltage category EN 61010-1
II
Overvoltage category EN 62477-1
III
Identification
ABS
Conducted noise emission
EN 55016
DNV GL noise radiation
Class B
Contact discharge
8 kV (Test Level 4)
Comments
Criterion A
Fast transients (burst)
EN 61000-4-4
Conducted interference
EN 61000-4-6
Voltage dip
0 %
Pulse-shape magnetic field
EN 61000-4-9
Asymmetrical conducted disturbance variables
EN 61000-4-16
Attenuated oscillating wave
EN 61000-4-18
ECLASS 10.0.1
27210901
ECLASS 9.0
27210901
ETIM 7.0
EC002046
Typical current consumption
5.5 A (24 V DC)
Typical response time
300 ms (from SLEEP MODE)
Inrush current integral (I2t)
< 0.02 A2s
Type test (IEC/EN 60950-1) A
2 kV DC
Production test B
2 kV DC
Conductor cross section solid
0.2 mm² ... 1 mm²
Flexible conductor cross section (ferrule with plastic sleeve)
0.2 mm² ... 0.75 mm²
Nominal output current (IN)
8 A
System deviation, static
< 1 % (change in load, static 10 % ... 90 %)
No-load proof
yes
Types of signaling
LED
Default
Output power ON (>40 kΩ/24 V DC/open bridge between REM and SGnd)
Switch contact
floating
MTBF (IEC 61709, SN 29500)
> (25 °C)
Voltage
1 kV
Main converter stage
50 kHz ... 350 kHz (Main converter stage)
Inflammability class in acc. with UL 94 (housing / terminal blocks)
V0
Width with alternative assembly
122 mm
Maximum power dissipation in no-load condition
< 2 W
Ambient temperature (operation)
-25 °C ... 70 °C (> 60 °C Derating: 2.5 %/K)
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Climatic class
3K3 (EN 60721)
EMC requirements for noise immunity
EN 61000-6-1
Designation
Shipbuilding
Electromagnetic compatibility
Conformance with EMC Directive 2014/30/EU
DNV GL conducted interference
Class B
Electromagnetic HF field
EN 61000-4-3
Test field strength
100 A/m
Signal
2 kV (Test Level 3 - asymmetrical)
I/O/S
asymmetrical
Voltage dips
EN 61000-4-29
Test level 1
15 Hz 150 Hz (Test Level 3)
Test level 4
15 kHz 150 kHz (Test Level 3)
Test level 6
0 Hz 16.7 Hz 50 Hz 60 Hz (Test Level 3)
Input, output (test level 1)
100 kHz 1 MHz (Test Level 3 - symmetrical)
Signals (test level 1)
100 kHz 1 MHz (Test Level 2 - symmetrical)
Signals (test level 2)
100 kHz 1 MHz (Test Level 2 - asymmetrical)
Criterion C
Temporary adverse effects on the operating behavior, which the device corrects automatically or which can be restored by actuating the operating elements.
Setting range of the output voltage (USet)
12 V DC ... 15 V DC (> 12 V DC, constant capacity)
System deviation, input voltage change
< 0.1 % (change in input voltage ±10 %)
Feedback voltage resistance
≤ 25 V DC
Rise time
< 1 s (UOUT (10 % ... 90 %))
POut
> 100 % (LED lights up yellow, output power > 96 W)
Analog
4 mA ... 20 mA ±5 % (Load ≤400 Ω)
Input voltage range
18 V DC ... 32 V DC
Inrush current limitation typical
1 A
Type test (IEC/EN 60950-1) D
0.5 kV DC
Production test A
2 kV DC
Production test D
0.5 kV DC
Flexible conductor cross section flexible (ferrule, w/o plastic sleeve)
0.2 mm² ... 1.5 mm²
Static Boost (IStat.Boost)
10 A
Dynamic Boost (IDyn.Boost)
16 A (5 s)
Connection in parallel
Yes, for redundancy and increased capacity
UOut
> 0.9 x USet (LED lights up green)
Signal option
Output current
Function
Signal ground
Temperature
30 °C
Auxiliary converter stage
190 kHz ... 220 kHz (Auxiliary converter stage)
Hood version
Stainless steel X6Cr17
Height with alternative assembly
130 mm
Efficiency
typ. 91 % (24 V DC)
Power loss nominal load max.
< 9 W
Maximum altitude
≤ 5000 m (> 2000 m, observe derating)
Vibration (operation)
5 Hz ... 100 Hz resonance search 2.3g, 90 min., resonance frequency 2.3g, 90 min. (according to DNV GL Class C)
EMC requirements, power plant
IEC 61850-3
Standard designation
Mains variation/undervoltage
Noise emission
EN 55016
Electrostatic discharge
EN 61000-4-2
Frequency range
50 Hz ... 60 Hz
Output
1 kV (Test Level 3 - symmetrical)
Power frequency magnetic field
EN 61000-4-8
Damped oscillating magnetic field
EN 61000-4-10
Test level 3
1.5 kHz 15 kHz (Test Level 3)
Test level 5
16.7 Hz 50 Hz 60 Hz 150 Hz 180 Hz (Test Level 3)
Input, output (test level 3)
10 MHz (Test Level 2 - asymmetrical)
Criterion B
Temporary impairment to operational behavior that is corrected by the device itself.
ETIM 6.0
EC002046
EMC requirements for noise emission
EN 61000-6-3
Standards/regulations
EN 61000-4-29
Low Voltage Directive
Conformance with Low Voltage Directive 2014/35/EC
Additional text
Test Level 2
Discharge in air
15 kV (Test Level 4)
Input
1 kV (Test Level 3 - symmetrical)
Surge voltage load (surge)
EN 61000-4-5
Frequency
0 Hz
Test level 2
150 Hz 1.5 kHz (Test Level 3)
Alternating component of DC voltage
EN 61000-4-17
Input, output (test level 2)
100 kHz 1 MHz (Test Level 2 - asymmetrical)
Criterion A
Normal operating behavior within the specified limits.
ECLASS 11.0
27210901