2910123 Phoenix Contact DC/DC Converters

Product Details

• Weight0.8 kg
• Mains buffering
  typ. 16 ms (24 V DC)
• Insulation voltage input/output
  4 kV DC (type test)
• Type test (IEC/EN 60950-1) D
  0.5 kV DC
• Conductor cross section flexible
  0.2 mm² ... 1.5 mm²
• Setting range of the output voltage (USet)
  48 V DC ... 56 V DC (> 48 V constant capacity)
• Magnetic circuit breaker tripping
  A1...A6 / B2 / C1...C2 / Z1...Z6
• No-load proof
  yes
• Protection against overvoltage at the output (OVP)
  ≤ 60 V DC
• Digital
  0 V DC
• Analog
  4 mA ... 20 mA ±5 % (Load ≤400 Ω)
• Function
  Signal ground
• Time
  352500 h
• Inflammability class in acc. with UL 94 (housing / terminal blocks)
  V0
• Depth
  125 mm
• Efficiency
  typ. 94 % (24 V DC)
• Ambient temperature (operation)
  -25 °C ... 70 °C (> 60 °C Derating: 2.5 %/K)
• Ambient temperature (storage/transport)
  -40 °C ... 85 °C
• Degree of pollution
  2
• EMC requirements, power plant
  IEC 61850-3
Identification
CB scheme (IEC 61010-1, IEC 61010-2-201)
Noise emission
EN 55016
Discharge in air
15 kV (Test Level 4)
Comments
Criterion A
Fast transients (burst)
EN 61000-4-4
Power frequency magnetic field
EN 61000-4-8
Voltage dip
0 %
Switch-on time
< 1 s
Inrush current limitation typical
1 A (after 1 ms)
Production test A
2 kV DC
Conductor cross section solid
0.2 mm² ... 1 mm²
Nominal output voltage (UN)
48 V DC
Selective Fuse Breaking (ISFB)
30 A (15 ms)
Short-circuit-proof
yes
Connection in series
yes
Rise time
< 1 s (UOUT (10 % ... 90 %))
UOut
> 0.9 x USet (LED lights up green)
Signal option
Output current
MTBF (IEC 61709, SN 29500)
> 1369000 h (25 °C)
Degree of protection
IP20
Height
130 mm
Power loss nominal load max.
< 16 W
Maximum altitude
≤ 5000 m (> 2000 m, observe derating)
Climatic class
3K3 (EN 60721)
Overvoltage category EN 62477-1
III
Conducted noise emission
EN 55016
Additional text
Test Level 2
Contact discharge
8 kV (Test Level 4)
Test field strength
100 A/m
Output
1 kV (Test Level 3 - symmetrical)
Conducted interference
EN 61000-4-6
Pulse-shape magnetic field
EN 61000-4-9
Test level 4
15 kHz 150 kHz (Test Level 3)
Attenuated oscillating wave
EN 61000-4-18
Signals (test level 2)
100 kHz 1 MHz (Test Level 2 - asymmetrical)
ECLASS 11.0
27210901
Electric strength, max.
60 V DC (60 s)
Inrush current integral (I2t)
< 0.01 A2s
Type test (IEC/EN 60950-1) A
2 kV DC
Production test B
2 kV DC
Stripping length
8 mm
Conductor cross section AWG
24 ... 16
Dynamic Boost (IDyn.Boost)
10 A (5 s)
System deviation, input voltage change
< 0.3 % (change in input voltage ±10 %)
Feedback voltage resistance
≤ 60 V DC
Connection labeling
3.4 +
Switch contact
floating
Reference potential
to OUT1, OUT2, REM
Auxiliary converter stage
190 kHz ... 220 kHz (Auxiliary converter stage)
Hood version
Stainless steel X6Cr17
Height with alternative assembly
130 mm
Power dissipation SLEEP MODE
< 2 W
Vibration (operation)
5 Hz ... 100 Hz resonance search 2.3g, 90 min., resonance frequency 2.3g, 90 min. (according to DNV GL Class C)
Overvoltage category EN 61010-1
II
Designation
SIQ
DNV GL conducted interference
Class B
DNV GL noise radiation
Class B
Electromagnetic HF field
EN 61000-4-3
Surge voltage load (surge)
EN 61000-4-5
I/O/S
asymmetrical
Voltage dips
EN 61000-4-29
Asymmetrical conducted disturbance variables
EN 61000-4-16
Test level 5
16.7 Hz 50 Hz 60 Hz 150 Hz 180 Hz (Test Level 3)
Criterion B
Temporary impairment to operational behavior that is corrected by the device itself.
Criterion C
Temporary adverse effects on the operating behavior, which the device corrects automatically or which can be restored by actuating the operating elements.
Input voltage range
18 V DC ... 32 V DC
Typical response time
300 ms (from SLEEP MODE)
Type test (IEC/EN 60950-1) C
0.5 kV DC
Production test C
0.5 kV DC
Connection method
Push-in connection
Flexible conductor cross section flexible (ferrule, w/o plastic sleeve)
0.2 mm² ... 1.5 mm²
Static Boost (IStat.Boost)
6.25 A
System deviation, static
< 3 % (change in load, static 10 % ... 90 %)
Residual ripple
< 50 mVPP
POut
> 100 % (LED lights up yellow, output power > 240 W)
Maximum contact load
24 V DC
Temperature
30 °C
Main converter stage
67 kHz ... 135 kHz (Main converter stage)
Side element version
Aluminum
Depth with alternative assembly
53 mm
Ambient temperature (start-up type tested)
-40 °C
Shock
18 ms, 30g, in each space direction (according to IEC 60068-2-27)
EMC requirements for noise immunity
EN 61000-6-1
Standards/regulations
EN 61000-4-29
Test level 2
150 Hz 1.5 kHz (Test Level 3)
Input, output (test level 2)
100 kHz 1 MHz (Test Level 2 - asymmetrical)
Signals (test level 1)
100 kHz 1 MHz (Test Level 2 - symmetrical)
Input, output (test level 3)
10 MHz (Test Level 2 - asymmetrical)
Typical current consumption
13.8 A (24 V DC)
Input fuse
30 A (slow-blow, internal)
Type test (IEC/EN 60950-1) B
4 kV DC
Production test D
0.5 kV DC
Flexible conductor cross section (ferrule with plastic sleeve)
0.2 mm² ... 0.75 mm²
Nominal output current (IN)
5 A
System deviation, dynamic
< 3 % (Dynamic load change 10 % ... 90 %, 10 Hz)
Connection in parallel
Yes, for redundancy and increased capacity
Types of signaling
LED
UIn
> 0.8 x UInNom (LED off)
Default
Output power ON (>40 kΩ/24 V DC/open bridge between REM and SGnd)
Output current
5 A
Voltage
1 kV
Protection class
Special with SELV input and output
Width
50 mm
Width with alternative assembly
122 mm
Maximum power dissipation in no-load condition
< 4 W
Max. permissible relative humidity (operation)
≤ 95 % (at 25 °C, non-condensing)
Standard designation
Mains variation/undervoltage
Electromagnetic compatibility
Conformance with EMC Directive 2014/30/EU
Low Voltage Directive
Conformance with Low Voltage Directive 2014/35/EC
Electrostatic discharge
EN 61000-4-2
Frequency range
50 Hz ... 60 Hz
Signal
2 kV (Test Level 3 - asymmetrical)
Input
1 kV (Test Level 3 - symmetrical)
Frequency
0 Hz
Damped oscillating magnetic field
EN 61000-4-10
Test level 3
1.5 kHz 15 kHz (Test Level 3)
Input, output (test level 1)
100 kHz 1 MHz (Test Level 2 - symmetrical)
Criterion A
Normal operating behavior within the specified limits.
ECLASS 9.0
27210901
Test level 1
15 Hz 150 Hz (Test Level 3)
Test level 6
0 Hz 16.7 Hz 50 Hz 60 Hz (Test Level 3)
Alternating component of DC voltage
EN 61000-4-17
ECLASS 10.0.1
27210901