2981978 Phoenix Contact Electrical Safety Devices
Part#:2981978
Manufacturer:Phoenix Contact
Product Lifecycle:Active
In-stock parts: 87
Dec 22, 2024
Coupling relay for SIL 3 high/low demand applications, couples digital output signals to the periphery, 1 enabling current path, 1 signal contact, module for safe state off applications, test pulse filter, fuse, plug-in screw connection, 17.5 mm width
About the manufacturer: Phoenix Contact is one of the manufacturers that offers Electrical Safety Devices that you can order at marketplace.quotebeam.com. Phoenix Contact manufactures industrial electrical and electronic technology products that offer power, protection, connectivity, and automation for systems and equipment.
Check out the 2981978 Phoenix Contact price in the box on the right side or send a quick quote.
Product Details
- Depth 114.5 mm
- Utilization restriction EMC: class A product, see manufacturer's declaration in the download area
- Height 99 mm
- Max. permissible humidity (storage/transport) 75 % (on average, 85% infrequently, non-condensing)
- Input voltage range 20.4 V DC ... 26.4 V DC
- Typ. starting time with Us 50 ms
- Filter time max. 5 ms (at A1 in the event of voltage dips at Us)
- Inrush current, minimum 5 mA (N/O contact / N/C contact)
- Mechanical service life 10x 106 cycles
- Relay type Electromechanical relay with force-guided contacts in accordance with IEC/EN 61810-3
- Degree of protection IP20
- Conductor cross-section AWG 24 ... 12
- Designation Air clearances and creepage distances between the power circuits
- Safety Integrity Level Claim Limit (SIL CL) 3 (max. 10% of the entire SIL; diagnostic coverage (DC) of the control unit at A1/A2 must be ≥ 90% )
- Width 17.5 mm
- Ambient temperature (operation) -20 °C ... 55 °C (observe derating)
- Rated control circuit supply voltage US 24 V DC -15 % / +10 %
- Typical release time 50 ms
- Contact material AgCuNi, + 0.2 µm Au
- Maximum inrush current 5 A (N/O contact)
- Switching capacity min. 75 mW
- Nominal operating mode 100% operating factor
- Housing material PBT
- Conductor cross section flexible 0.2 mm² ... 2.5 mm²
- Stop category 0
- Standards/regulations DIN EN 50178/VDE 0160
- Shock 15g
- ECLASS 4.1 40020600
- China RoHS Environmentally Friendly Use Period = 50 years
- ECLASS 7.0 27371819
- ETIM 6.0 EC001449
- ETIM 3.0 EC001449
- UNSPSC 19.0 39122205
- Max. permissible relative humidity (operation) 75 % (on average, 85% infrequently, non-condensing)
- Rated control supply current IS typ. 55 mA
- Recovery time 1 s
- Operating voltage display 1 x yellow LED
- Limiting continuous current 5 A (N/O contact, pay attention to the derating)
- Maximum interrupting rating (inductive load) 72 W (24 V DC, τ = 40 ms, N/C contact: 2.4 W)
- Net weight 155 g
- Mounting type DIN rail mounting
- pluggable Yes
- Screw thread M3
- Category 4 (Diagnostic coverage (DC) of the control unit at A1/A2 must be ≥ 99%)
- Ambient temperature (storage/transport) -40 °C ... 70 °C
- Power consumption at US typ. 1.32 W
- Protective circuit Surge protection Suppressor diode, 33 V (A1 - A2)
- Contact type 1 enabling current path
- Minimum switching voltage 15 V AC/DC (N/O contact / N/C contact)
- Sq. Total current 25 A2 (observe derating)
- Output fuse 5 A T fuse (N/O contact)
- Min. degree of protection of inst. location IP54
- Conductor cross section solid 0.2 mm² ... 2.5 mm²
- Stripping length 7 mm
- Performance level (PL) e (Diagnostic coverage (DC) of the control unit at A1/A2 must be ≥ 99%)
- Vibration (operation) 10 Hz ... 150 Hz, 2g
- ECLASS 10.0.1 27371819
- ECLASS 5.0 27371900
- ETIM 2.0 EC001449
- ETIM 7.0 EC001449
- UNSPSC 7.0901 39121501
- UNSPSC 11 39121501
- UNSPSC 21.0 39122205
- Maximum altitude ≤ 2000 m (Above sea level)
- Inrush current max. 100 mA
- Maximum switching frequency 0.5 Hz
- Maximum switching voltage 250 V AC/DC (N/O contact / N/C contact, observe the load curve)
- Interrupting rating (ohmic load) max. 120 W (24 V DC, τ = 0 ms, N/C contact: 2.4 W)
- Mounting position any
- Housing color yellow
- Connection method Screw connection
- Safety Integrity Level (SIL) 3
- Rated insulation voltage 250 V AC
- Overvoltage category III
- REACh SVHC Lead 7439-92-1
- ECLASS 11.0 27371819
- ECLASS 5.1 27371900
- ETIM 4.0 EC001449
- UNSPSC 12.01 39121501
- UNSPSC 18.0 39122205
- Rated surge voltage/insulation Safe isolation, reinforced insulation 6 kV between the control circuits (A1/A2), (21/22), (13/14)
- Degree of pollution 2
- Conformance CE-compliant
- ECLASS 4.0 40020600
- ECLASS 6.0 27371800
- ECLASS 9.0 27371819
- UNSPSC 6.01 30211901
- UNSPSC 13.2 39121501
- UNSPSC 20.0 39122205
Product condition
ORIGINAL PACKAGING
SURPLUS ORIGINAL PACKAGING - 100% unused and in original packaging
This item can ship within 24h!
1-year warranty
$250.73
Stock:
87
Select Qty:
$250.73
$250.73 each
By purchasing this item, you agree to the Terms & Conditions
Quotebeam is NOT an authorized distributor of Phoenix Contact
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Phoenix Contact Disclaimer:
The product is unused surplus. Quotebeam is not an authorized surplus dealer or affiliate for the Manufacturer of this product. Products may feature older date codes or be from an earlier series than what is currently available from the manufacturer or authorized dealers. Because Quotebeam is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Phoenix Contact Controls products will have firmware already installed, Quotebeam makes no representation as to whether a Controls product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Quotebeam also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Phoenix Contact, its distributors, or any other source. Quotebeam also makes no representations as to your right to install any such firmware on the product. Quotebeam will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Relevant products
Do you have questions?
We’re here for you ✨
We are a proud member of:
