3003350 Phoenix Contact Terminal Blocks

Product Details

• Rated surge voltage
  8 kV
• Nominal current IN
  24 A
• Result of surge voltage test
  Test passed
• Result of the test for mechanical stability of terminal points (5 x conductor connection)
  Test passed
• Tensile test result
  Test passed
• Tight fit on carrier
  NS 32/NS 35
• Short-time current
  0.48 kA
• Relative insulation material temperature index (Elec., UL 746 B)
  125 °C
• Height NS 35/7,5
  42 mm
• Tightening torque max
  0.8 Nm
• Conductor cross section AWG min.
  24
• Number of levels
  1
• Insulating material
  PA
• Maximum power dissipation for nominal condition
  0.77 W
• Finger protection
  guaranteed
• Result of power-frequency withstand voltage test
  Test passed
• Result of temperature-rise test
  Test passed
• Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
  125 °C
• Length
  42.5 mm
• Tightening torque, min
  0.6 Nm
Conductor cross section solid max.
4 mm²
Min. AWG conductor cross section, flexible
24
Bending test conductor cross section/weight
0.2 mm² / 0.2 kg
Number of connections
2
Color
blue
Overvoltage category
III
Maximum load current
24 A (with a 2.5 mm² conductor cross section)
Open side panel
Yes
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Result of flexion and pull-out test
Test passed
Bending test turns
135
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Result of thermal test
Test passed
End cover width
1.5 mm
Connection method
Screw connection
Connection in acc. with standard
CSA
Conductor cross section AWG max.
12
Cross section with insertion bridge, solid max.
2.5 mm²
2 conductors with same cross section, stranded min.
0.2 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum
0.25 mm²
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 11.0
27141120
ECLASS 6.0
27141100
Nominal cross section
2.5 mm²
Degree of pollution
3
Back of the hand protection
guaranteed
Bending test rotation speed
10 rpm
Result of tight fit on support
Test passed
Short circuit stability result
Test passed
Proof of thermal characteristics (needle flame) effective duration
30 s
Width
5.2 mm
Screw thread
M3
Conductor cross section flexible min.
0.2 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
1.5 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
1.5 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 125°C)
Ambient temperature (assembly)
-5 °C ... 70 °C
Stripping length
7 mm
ECLASS 7.0
27141120
ETIM 3.0
EC000897
UNSPSC 11
39121410
UNSPSC 21.0
39121410
Potentials
1
Flammability rating according to UL 94
V2
Height NS 32
47 mm
Conductor cross section solid min.
0.2 mm²
Conductor cross section flexible max.
2.5 mm²
Max. AWG conductor cross section, flexible
14
2 conductors with same cross section, solid max.
1 mm²
2 conductors with same cross section, stranded max.
1 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 10.0.1
27141120
ECLASS 4.1
27141100
ETIM 7.0
EC000897
UNSPSC 18.0
39121410
UNSPSC 20.0
39121410
Insulating material group
I
Nominal voltage UN
800 V
Power frequency withstand voltage setpoint
2 kV
Setpoint
1 N
Result of voltage-drop test
Test passed
Conductor cross section short circuit testing
4 mm²
Height NS 35/15
49.5 mm
ECLASS 9.0
27141120
ECLASS 5.1
27141100
ETIM 4.0
EC000897
UNSPSC 7.0901
39121410
UNSPSC 19.0
39121410
2 conductors with same cross section, solid min.
0.2 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 4.0
27141100
Internal cylindrical gage
A3
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 5.0
27141100
ETIM 2.0
EC000897
UNSPSC 6.01
30211811
ETIM 6.0
EC000897
UNSPSC 13.2
39121410
UNSPSC 12.01
39121410
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.25 mm²
Cross section with insertion bridge, stranded max.
2.5 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
2.5 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum
1 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.25 mm²