3004100 Phoenix Contact Terminal Blocks

Product Details

• Note
  Swing the locking lever to its final position before replacing the fuse.
• Color
  black
• Rated surge voltage
  8 kV
• Maximum load current
  6.3 A (the current is determined by the fuse used)
• Fuse
  G / 5 x 20 / 5 x 25 / 5 x 30
• Back of the hand protection
  guaranteed
• Result of power-frequency withstand voltage test
  Test passed
• Compatibitity between modular fuse terminal block and fuse insert
  Test passed
• Bending test conductor cross section/weight
  0.2 mm² / 0.2 kg
• Bending test turns
  135
• Result of thermal test
  Test passed
• Acceleration
  5g
• Relative insulation material temperature index (Elec., UL 746 B)
  130 °C
• Test specification, shock test
  DIN EN 50155 (VDE 0115-200):2008-03
• Number of shocks per direction
  3
• Fire protection for rail vehicles (DIN EN 45545-2) R24
  HL 1 - HL 3
• Fire protection for rail vehicles (DIN EN 45545-2) R26
  HL 1 - HL 3
• Height NS 32
  61.5 mm
• Conductor cross section flexible, with ferrule without plastic sleeve max.
  4 mm²
• Conductor cross section AWG max.
  12
2 conductors with same cross section, solid min.
0.2 mm²
Stripping length
8 mm
Tightening torque, min
0.6 Nm
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 5.0
27141100
ETIM 2.0
EC000897
ETIM 7.0
EC000899
Insulating material group
I
Nominal current IN
6.3 A
Open side panel
No
Result of surge voltage test
Test passed
Power frequency withstand voltage setpoint
2 kV
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Conductor cross section flexible, with ferrule with plastic sleeve max.
4 mm²
2 conductors with same cross section, stranded max.
1.5 mm²
Internal cylindrical gage
A4
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 125°C)
ECLASS 10.0.1
27141116
ECLASS 6.0
27141100
ETIM 6.0
EC000899
UNSPSC 6.01
30211811
UNSPSC 18.0
39121410
Maximum power dissipation for nominal condition
1.02 W
Connection in acc. with standard
CSA
Fuse type
Glass / ceramics / ...
Finger protection
guaranteed
Result of tight fit on support
Test passed
Contact resistance
Test passed
Result of temperature-rise test
Test passed
Test spectrum
Service life test category 1, class B, body mounted
Test directions
X-, Y- and Z-axis (pos. and neg.)
ASD level
1.857 (m/s2)2/Hz
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
125 °C
Static insulating material application in cold
-60 °C
Calorimetric heat release NFPA 130 (ASTM E 1354)
27,5 MJ/kg
Width
8.2 mm
Height NS 35/15
64 mm
Conductor cross section flexible max.
4 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.25 mm²
2 conductors with same cross section, solid max.
1.5 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
1.5 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 4.0
27141100
ECLASS 4.1
27141100
ECLASS 7.0
27141116
UNSPSC 12.01
39121410
UNSPSC 20.0
39121410
Insulating material
PA
Overvoltage category
III
Number of positions
1
Surge voltage test setpoint
9.8 kV
Actuatiing forces on plug in or lever in fuse insert carriers
Test passed
Result of flexion and pull-out test
Test passed
Testing the rated value of the power dissipation (exclusively short circuit protection)
Test passed
Testing the rated value of the power dissipation (overload and short circuit Protection)
Test passed
Test frequency
f1 = 5 Hz to f2 = 150 Hz
Test duration per axis
5 h
Shock form
Half-sine
Surface flammability NFPA 130 (ASTM E 162)
passed
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Conductor cross section solid min.
0.2 mm²
Conductor cross section flexible min.
0.2 mm²
Cross section with insertion bridge, solid max.
4 mm²
2 conductors with same cross section, stranded min.
0.2 mm²
Connection method
Screw connection
Tightening torque max
0.8 Nm
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 9.0
27141116
ETIM 3.0
EC000899
UNSPSC 7.0901
39121410
UNSPSC 19.0
39121410
Shock test result
Test passed
Shock duration
30 ms
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Length
72.5 mm
Conductor cross section solid max.
4 mm²
Conductor cross section AWG min.
24
Cross section with insertion bridge, stranded max.
4 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Screw thread
M3
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 11.0
27141116
ECLASS 5.1
27141100
ETIM 4.0
EC000899
UNSPSC 13.2
39121410
UNSPSC 21.0
39121410
Number of levels
1
Rated operating voltage
250 V
Degree of pollution
3
Flammability rating according to UL 94
V0
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.25 mm²
Height NS 35/7,5
56.5 mm
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum
0.25 mm²
China RoHS
Environmentally Friendly Use Period = 50 years
Number of connections
2
Nominal cross section
4 mm²
Nominal voltage UN
800 V (As a fuse terminal block)
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
UNSPSC 11
39121410
Bending test rotation speed
10 rpm
Oscillation, broadband noise test result
Test passed
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum
1.5 mm²