3008012 Phoenix Contact Terminal Blocks

Product Details

• Conductor cross section flexible, with ferrule without plastic sleeve max.
  35 mm²
• Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
  6 mm²
• ECLASS 9.0
  27141120
• UNSPSC 7.0901
  39121410
• ECLASS 4.1
  27141100
• ECLASS 10.0.1
  27141120
• ECLASS 5.0
  27141100
• UNSPSC 6.01
  30211811
• UNSPSC 20.0
  39121410
• Ambient temperature (assembly)
  -5 °C ... 70 °C
• ECLASS 4.0
  27141100
• ETIM 2.0
  EC000897
• ECLASS 6.0
  27141100
• ETIM 4.0
  EC000897
• UNSPSC 18.0
  39121410
• ECLASS 11.0
  27141120
• ECLASS 7.0
  27141120
• ETIM 6.0
  EC000897
• Insulating material
  PA
• Number of connections
  2
Flammability rating according to UL 94
V0
Overvoltage category
III
Nominal current IN
125 A
Power frequency withstand voltage setpoint
2.2 kV
Bending test turns
135
Setpoint
10 N
Short circuit stability result
Test passed
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Length
50 mm
Connection method
Screw connection
Connection in acc. with standard
CSA
Conductor cross section AWG max.
1/0
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Color
gray
Degree of pollution
3
Finger protection
guaranteed
Tensile test result
Test passed
Result of voltage-drop test
Test passed
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
125 °C
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Height NS 35/15
69.5 mm
UNSPSC 11
39121410
UNSPSC 19.0
39121410
Number of levels
1
Potentials
1
Rated surge voltage
8 kV
Maximum load current
150 A (with 50 mm² conductor cross section)
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Result of power-frequency withstand voltage test
Test passed
Bending test rotation speed
10 rpm
Tight fit on carrier
NS 32/NS 35
ETIM 7.0
EC000897
UNSPSC 21.0
39121410
Nominal cross section
35 mm²
Maximum power dissipation for nominal condition
4.06 W
Nominal voltage UN
1000 V
Back of the hand protection
guaranteed
Bending test conductor cross section/weight
0.75 mm² / 0.4 kg
Result of temperature-rise test
Test passed
Result of thermal test
Test passed
UNSPSC 13.2
39121410
Result of flexion and pull-out test
Test passed
Result of tight fit on support
Test passed
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Conductor cross section short circuit testing
50 mm²
Insulating material group
I
Open side panel
No
Result of surge voltage test
Test passed
2 conductors with same cross section, solid min.
0.75 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum
0.75 mm²
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 5.1
27141100
ETIM 3.0
EC000897
UNSPSC 12.01
39121410
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Stripping length
16 mm
Conductor cross section solid min.
0.75 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.75 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
35 mm²
2 conductors with same cross section, stranded min.
0.75 mm²
Internal cylindrical gage
B9
Permissible humidity (storage/transport)
30 % ... 70 %
Proof of thermal characteristics (needle flame) effective duration
30 s
Static insulating material application in cold
-60 °C
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Tightening torque max
3.7 Nm
Conductor cross section solid max.
50 mm²
Height NS 32
67 mm
Conductor cross section flexible max.
35 mm²
2 conductors with same cross section, solid max.
16 mm²
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Tightening torque, min
3.2 Nm
Conductor cross section flexible min.
0.75 mm²
Conductor cross section AWG min.
18
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.75 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum
10 mm²
Min. AWG conductor cross section, flexible
18
Calorimetric heat release NFPA 130 (ASTM E 1354)
27,5 MJ/kg
Height NS 35/7,5
62 mm
Width
15.1 mm
Screw thread
M6
2 conductors with same cross section, stranded max.
10 mm²
Ambient temperature (actuation)
-5 °C ... 70 °C
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
Max. AWG conductor cross section, flexible
2
Short-time current
6 kA
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.75 mm²