3010217 Phoenix Contact Terminal Blocks

Product Details

• Degree of pollution
  3
• Maximum power dissipation for nominal condition
  13.78 W
• Shock protection test specification
  DIN EN 50274 (VDE 0660-514):2002-11
• Finger protection
  guaranteed
• Tensile test result
  Test passed
• Result of temperature-rise test
  Test passed
• Proof of thermal characteristics (needle flame) effective duration
  30 s
• Test duration per axis
  5 h
• Test frequency
  f1 = 5 Hz to f2 = 250 Hz
• Shock form
  Semi-sinusoidal
• Potentials
  1
• Calorimetric heat release NFPA 130 (ASTM E 1354)
  28 MJ/kg
• Result of surge voltage test
  Test passed
• Result of power-frequency withstand voltage test
  Test passed
• Bending test rotation speed
  10 rpm
• Result of tight fit on support
  Test passed
• Short-time current
  28.8 kA
• Test specification, oscillation, broadband noise
  DIN EN 50155 (VDE 0115-200):2008-03
• Number of shocks per direction
  3
• Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
  130 °C
Width
36 mm
Height NS 32
129 mm
Screw thread
M10
Tightening torque, min
25 Nm
Internal cylindrical gage
B15
Color
gray
Insulating material
PA
Insulating material group
I
Nominal voltage UN
1000 V
Surface flammability NFPA 130 (ASTM E 162)
passed
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Connection method
Screw connection
Tightening torque max
30 Nm
Connection in acc. with standard
CSA
Min. AWG conductor cross section, flexible
2/0
2 conductors with same cross section, solid max.
95 mm²
Nominal cross section
240 mm²
Overvoltage category
III
Open side panel
No
Surge voltage test setpoint
9.8 kV
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Result of voltage-drop test
Test passed
Short circuit stability result
Test passed
Test spectrum
Service life test category 2, bogie-mounted
Shock duration
18 ms
Number of connections
2
Rated surge voltage
8 kV
Nominal current IN
415 A
Note regarding shock protection
Finger-safe protection is not guaranteed if bridges are positioned.
Power frequency withstand voltage setpoint
2.2 kV
Bending test turns
135
Tight fit on carrier
NS 32/NS 35
Static insulating material application in cold
-60 °C
Result of thermal test
Test passed
ASD level
6.12 (m/s2)2/Hz
Test directions
X-, Y- and Z-axis (pos. and neg.)
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Height NS 35/15
131.5 mm
Height
123.6 mm
Conductor cross section solid max.
240 mm²
Conductor cross section AWG min.
2/0
Conductor cross section AWG max.
500 kcmil
Number of levels
1
Flammability rating according to UL 94
V0
Maximum load current
415 A (with 240 mm² conductor cross section)
Back of the hand protection
guaranteed
Result of flexion and pull-out test
Test passed
Conductor cross section short circuit testing
240 mm²
Ageing test for screwless modular terminal block temperature cycles
192
Acceleration
30g
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Length
100 mm
Note
Note: Product releases, connection cross sections and notes on connecting aluminum cables can be found in the download area.
Stripping length
40 mm
Conductor cross section solid min.
70 mm²
Conductor cross section flexible min.
70 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
185 mm²
ECLASS 7.0
27141120
Conductor cross section flexible max.
240 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
70 mm²
Cross section with insertion bridge, solid max.
240 mm²
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 5.0
27141100
Conductor cross section flexible, with ferrule with plastic sleeve min.
70 mm²
Max. AWG conductor cross section, flexible
500 kcmil
2 conductors with same cross section, solid min.
35 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 11.0
27141120
ECLASS 4.1
27141100
ETIM 6.0
EC000897
UNSPSC 6.01
30211811
UNSPSC 20.0
39121410
UNSPSC 21.0
39121410
Cross section with insertion bridge, stranded max.
185 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum
50 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 125°C)
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 9.0
27141120
UNSPSC 11
39121410
UNSPSC 12.01
39121410
UNSPSC 19.0
39121410
2 conductors with same cross section, stranded min.
50 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum
35 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 10.0.1
27141120
ECLASS 5.1
27141100
ETIM 4.0
EC000897
Conductor cross section flexible, with ferrule with plastic sleeve max.
185 mm²
2 conductors with same cross section, stranded max.
95 mm²
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 4.0
27141100
ECLASS 6.0
27141100
ETIM 3.0
EC000897
UNSPSC 7.0901
39121410
UNSPSC 13.2
39121410
ETIM 2.0
EC000897
ETIM 7.0
EC000897
UNSPSC 18.0
39121410