3025532 Phoenix Contact Terminal Blocks

Product Details

• Number of connections
  3
• Insulating material
  PA
• Insulating material group
  I
• Nominal current IN
  17.5 A
• Finger protection
  guaranteed
• Result of power-frequency withstand voltage test
  Test passed
• Bending test rotation speed
  10 rpm
• Tight fit on carrier
  NS 15
• Requirements, voltage drop
  ≤ 3.2 mV
• Relative insulation material temperature index (Elec.; UL 746 B)
  130 °C
• Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
  130 °C
• Fire protection for rail vehicles (DIN EN 45545-2) R24
  HL 1 - HL 3
• Height NS 15
  30 mm
• Conductor cross section solid max.
  1.5 mm²
• Conductor cross section flexible, with ferrule without plastic sleeve min.
  0.25 mm²
• Conductor cross section flexible, with ferrule with plastic sleeve min.
  0.25 mm²
• Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum
  0.34 mm²
• Permissible humidity (storage/transport)
  30 % ... 70 %
• ECLASS 4.0
  27141100
• ECLASS 9.0
  27141120
ETIM 7.0
EC000897
UNSPSC 12.01
39121410
UNSPSC 21.0
39121410
Number of levels
2
Rated surge voltage
4 kV
Maximum power dissipation for nominal condition
0.56 W (the value is multiplied when connecting multiple levels)
Open side panel
Yes
Back of the hand protection
guaranteed
Power frequency withstand voltage setpoint
1.89 kV
Conductor cross section tensile test
1.5 mm²
Tractive force setpoint
40 N
Short-time current
0.18 kA
Static insulating material application in cold
-60 °C
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Width
4.2 mm
Conductor cross section flexible min.
0.14 mm²
Conductor cross section AWG max.
16
Conductor cross section flexible, with ferrule with plastic sleeve max.
0.75 mm²
2 conductors with same cross section, stranded max.
0.5 mm²
Tightening torque, min
0.22 Nm
Ambient temperature (actuation)
-5 °C ... 70 °C
UNSPSC 7.0901
39121410
Color
blue
Degree of pollution
3
Nominal voltage UN
400 V
Maximum load current
17.5 A (in case of a 1.5 mm² conductor cross section, the maximum load current must not be exceeded by the total current of all connected conductors.)
Result of flexion and pull-out test
Test passed
Tensile test result
Test passed
Result of temperature-rise test
Test passed
Conductor cross section short circuit testing
1.5 mm²
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Conductor cross section solid min.
0.14 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
0.75 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum
0.25 mm²
Internal cylindrical gage
A1
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
ECLASS 10.0.1
27141120
ETIM 3.0
EC000897
ETIM 4.0
EC000897
UNSPSC 11
39121410
UNSPSC 20.0
39121410
Nominal cross section
1.5 mm²
Connection in acc. with standard
CSA
Shock protection test specification
IEC 60529:2001-02
Result of surge voltage test
Test passed
Checking the mechanical stability of terminal points (5 x conductor connection)
Test passed
Result of tight fit on support
Test passed
Short circuit stability result
Test passed
Result of voltage-drop test
Test passed
Proof of thermal characteristics (needle flame) effective duration
30 s
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
End cover width
1 mm
Conductor cross section AWG min.
26
2 conductors with same cross section, solid min.
0.14 mm²
2 conductors with same cross section, stranded min.
0.14 mm²
Stripping length
6 mm
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 4.1
27141100
ETIM 2.0
EC000897
UNSPSC 13.2
39121410
Flammability rating according to UL 94
V0
Overvoltage category
III
Surge voltage test setpoint
4.8 kV
Bending test turns
135
Bending test conductor cross section/weight
0.14 mm² / 0.2 kg
Setpoint
1 N
Result of thermal test
Test passed
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Length
28 mm
Connection method
Screw connection
Conductor cross section flexible max.
1.5 mm²
2 conductors with same cross section, solid max.
0.5 mm²
Screw thread
M2
Tightening torque max
0.25 Nm
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 5.1
27141100
ECLASS 6.0
27141100
ETIM 6.0
EC000897
UNSPSC 18.0
39121410
ECLASS 11.0
27141120
ECLASS 5.0
27141100
ECLASS 7.0
27141120
UNSPSC 6.01
30211811
UNSPSC 19.0
39121410