3026285 Phoenix Contact Terminal Blocks

Product Details

• Overvoltage category
  III
• Nominal voltage UN
  400 V
• Finger protection
  guaranteed
• Nominal cross section
  6 mm²
• Degree of pollution
  3
• Result of the test for mechanical stability of terminal points (5 x conductor connection)
  Test passed
• Requirements, voltage drop
  ≤ 3.2 mV
• Result of thermal test
  Test passed
• Surface flammability NFPA 130 (ASTM E 162)
  passed
• Specific optical density of smoke NFPA 130 (ASTM E 662)
  passed
• Conductor cross section solid max.
  10 mm²
• Number of levels
  1
• Flammability rating according to UL 94
  V0
• Maximum power dissipation for nominal condition
  1.31 W
• Maximum load current
  57 A (with 10 mm² conductor cross section)
• Result of surge voltage test
  Test passed
• Result of flexion and pull-out test
  Test passed
• Length
  91 mm
• Conductor cross section flexible min.
  0.5 mm²
• Conductor cross section flexible, with ferrule with plastic sleeve min.
  0.5 mm²
Insulating material
PA
Insulating material group
I
Back of the hand protection
guaranteed
Surge voltage test setpoint
7.3 kV
Bending test conductor cross section/weight
0.5 mm² / 0.3 kg
Conductor cross section tensile test
10 mm²
Setpoint
5 N
Temperature-rise test
Test passed
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Width
8.2 mm
2 conductors with same cross section, solid max.
2.5 mm²
Stripping length
10 mm
Permissible humidity (storage/transport)
30 % ... 70 %
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 5.0
27141100
ECLASS 6.0
27141100
ETIM 3.0
EC000902
Open side panel
Yes
Number of connections
2
Rated surge voltage
6 kV
Connection in acc. with standard
CUL
Shock protection test specification
IEC 60529:2001-02
Bending test rotation speed
10 rpm
Tractive force setpoint
90 N
Tight fit on carrier
NS 32/NS 35
Short-time current
1.2 kA
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Conductor cross section flexible max.
6 mm²
Conductor cross section AWG min.
20
2 conductors with same cross section, solid min.
0.5 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum
0.5 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum
2.5 mm²
Screw thread
M4
Ambient temperature (assembly)
-5 °C ... 70 °C
REACh SVHC
Lead 7439-92-1
ETIM 2.0
EC000902
UNSPSC 7.0901
39121410
UNSPSC 12.01
39121410
Color
gray
Nominal current IN
41 A
Result of power-frequency withstand voltage test
Test passed
Bending test turns
135
Tensile test result
Test passed
Result of voltage-drop test
Test passed
Conductor cross section short circuit testing
10 mm²
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Conductor cross section solid min.
0.5 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
6 mm²
2 conductors with same cross section, stranded min.
0.5 mm²
Connection method
Screw connection
Tightening torque max
1.4 Nm
ECLASS 11.0
27141120
ECLASS 4.1
27141100
ECLASS 7.0
27141120
UNSPSC 6.01
30211811
UNSPSC 18.0
39121410
Power frequency withstand voltage setpoint
1.89 kV
Result of tight fit on support
Test passed
Short circuit stability result
Test passed
Proof of thermal characteristics (needle flame) effective duration
30 s
Static insulating material application in cold
-60 °C
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Height NS 35/7,5
51 mm
Conductor cross section AWG max.
8
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
4 mm²
2 conductors with same cross section, stranded max.
4 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 10.0.1
27141120
ECLASS 5.1
27141100
ECLASS 9.0
27141120
ETIM 7.0
EC000897
UNSPSC 13.2
39121410
UNSPSC 19.0
39121410
Conductor cross section flexible, with ferrule with plastic sleeve max.
6 mm²
ETIM 6.0
EC000897
UNSPSC 21.0
39121410
UNSPSC 11
39121410
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.5 mm²
Tightening torque, min
1.2 Nm
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Ambient temperature (actuation)
-5 °C ... 70 °C
UNSPSC 20.0
39121410
ECLASS 4.0
27141100
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
ETIM 4.0
EC000902