3031270 Phoenix Contact Terminal Blocks

Product Details

• Fire protection for rail vehicles (DIN EN 45545-2) R26
  HL 1 - HL 3
• Conductor cross section solid max.
  4 mm²
• Connection in acc. with standard
  CSA
• Number of levels
  2
• Insulating material
  PA
• Degree of pollution
  3
• Maximum load current
  26 A (with 4 mm² conductor cross section)
• Nominal cross section
  2.5 mm²
• Rated surge voltage
  6 kV
• Color
  gray
• Area of application
  Railway industry
• Shock protection test specification
  DIN EN 50274 (VDE 0660-514):2002-11
• Power frequency withstand voltage setpoint
  1.89 kV
• Flammability rating according to UL 94
  V0
• Nominal current IN
  22 A
• Nominal voltage UN
  500 V
• Result of surge voltage test
  Test passed
• ETIM 7.0
  EC000897
• UNSPSC 19.0
  39121410
• Number of connections
  4
Overvoltage category
III
Maximum power dissipation for nominal condition
0.77 W (the value is multiplied when connecting multiple levels)
UNSPSC 6.01
30211811
UNSPSC 20.0
39121410
UNSPSC 21.0
39121410
UNSPSC 7.0901
39121410
UNSPSC 12.01
39121410
UNSPSC 11
39121410
UNSPSC 13.2
39121410
UNSPSC 18.0
39121410
Bending test rotation speed
10 rpm
Conductor cross section tensile test
4 mm²
Setpoint
1 N
Short circuit stability result
Test passed
Proof of thermal characteristics (needle flame) effective duration
30 s
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Checking the mechanical stability of terminal points (5 x conductor connection)
Test passed
Tensile test result
Test passed
Tractive force setpoint
60 N
Result of aging test
Test passed
Conductor cross section short circuit testing
4 mm²
Acceleration
5g
Finger protection
guaranteed
Surge voltage test setpoint
7.3 kV
Bending test conductor cross section/weight
0.08 mm² / 0.1 kg
Tight fit on carrier
NS 35
Result of temperature-rise test
Test passed
Ageing test for screwless modular terminal block temperature cycles
192
Result of thermal test
Test passed
Test spectrum
Service life test category 1, class B, body mounted
Test directions
X-, Y- and Z-axis (pos. and neg.)
Shock test result
Test passed
Static insulating material application in cold
-60 °C
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Calorimetric heat release NFPA 130 (ASTM E 1354)
27,5 MJ/kg
Height NS 35/7,5
47.5 mm
Conductor cross section solid min.
0.08 mm²
Conductor cross section AWG max.
12
Conductor cross section flexible, with ferrule without plastic sleeve max.
2.5 mm²
Stripping length
8 mm ... 10 mm
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 11.0
27141120
ECLASS 10.0.1
27141120
ETIM 3.0
EC000897
ETIM 4.0
EC000897
Open side panel
Yes
Result of power-frequency withstand voltage test
Test passed
Insulating material group
I
Back of the hand protection
guaranteed
Result of flexion and pull-out test
Test passed
Bending test turns
135
Result of tight fit on support
Test passed
Requirements, voltage drop
≤ 3.2 mV
Short-time current
0.48 kA
Oscillation, broadband noise test result
Test passed
Test frequency
f1 = 5 Hz to f2 = 150 Hz
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Relative insulation material temperature index (Elec.; UL 746 B)
130 °C
Shock form
Half-sine
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
0.5 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Ambient temperature (assembly)
-5 °C ... 70 °C
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 5.1
27141100
Result of voltage-drop test
Test passed
ASD level
1.857 (m/s2)2/Hz
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
125 °C
Shock duration
30 ms
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
End cover width
2.2 mm
Width
5.2 mm
Conductor cross section flexible min.
0.08 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.14 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.14 mm²
Internal cylindrical gage
A3
ECLASS 4.0
27141100
ECLASS 5.0
27141100
ECLASS 6.0
27141100
ETIM 2.0
EC000897
Test duration per axis
5 h
Number of shocks per direction
3
Surface flammability NFPA 130 (ASTM E 162)
passed
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Height NS 35/15
55 mm
Connection method
Spring-cage connection
Length
67.5 mm
Conductor cross section flexible max.
2.5 mm²
Conductor cross section AWG min.
28
Conductor cross section flexible, with ferrule with plastic sleeve max.
2.5 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 4.1
27141100
ECLASS 9.0
27141120
ETIM 6.0
EC000897
ECLASS 7.0
27141120