3031393 Phoenix Contact Terminal Blocks

Product Details

• Ambient temperature (actuation)
  -5 °C ... 70 °C
• UNSPSC 7.0901
  39121410
• UNSPSC 19.0
  39121410
• ECLASS 9.0
  27141120
• ETIM 2.0
  EC000897
• UNSPSC 21.0
  39121410
• ECLASS 6.0
  27141100
• UNSPSC 13.2
  39121410
• Ambient temperature (storage/transport)
  -25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
• Number of connections
  3
• Nominal cross section
  4 mm²
• Area of application
  Railway industry
• Degree of pollution
  3
• Nominal voltage UN
  800 V
• Finger protection
  guaranteed
• Power frequency withstand voltage setpoint
  2 kV
• Result of tight fit on support
  Test passed
• Tensile test result
  Test passed
• Conductor cross section short circuit testing
  6 mm²
• Number of levels
  1
Color
gray
Flammability rating according to UL 94
V0
Overvoltage category
III
Nominal current IN
32 A (with 6 mm² conductor cross section)
Maximum power dissipation for nominal condition
1.02 W
Maximum load current
40 A (In the case of a 6 mm² conductor cross section, the maximum load current must not be exceeded by the total current of all connected conductors)
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Result of power-frequency withstand voltage test
Test passed
Bending test rotation speed
10 rpm
Setpoint
1 N
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Proof of thermal characteristics (needle flame) effective duration
30 s
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Shock test result
Test passed
Number of shocks per direction
3
Calorimetric heat release NFPA 130 (ASTM E 1354)
27,5 MJ/kg
Length
71.5 mm
Conductor cross section solid max.
6 mm²
Conductor cross section flexible max.
4 mm²
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
End cover width
2.2 mm
Connection in acc. with standard
CSA
Connection
1 level
Min. AWG conductor cross section, flexible
28
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 10.0.1
27141120
ECLASS 7.0
27141120
ETIM 4.0
EC000897
UNSPSC 6.01
30211811
UNSPSC 18.0
39121410
Open side panel
Yes
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Tight fit on carrier
NS 35
Note
The max. load current must not be exceeded by the total current of all connected conductors.
Result of thermal test
Test passed
Oscillation, broadband noise test result
Test passed
ASD level
6.12 (m/s2)2/Hz
Shock duration
18 ms
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Width
6.2 mm
Connection method
Spring-cage connection
Conductor cross section AWG min.
28
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.14 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
4 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
ECLASS 4.0
27141100
Potentials
1
Rated surge voltage
8 kV
Insulating material
PA
Insulating material group
I
Back of the hand protection
guaranteed
Bending test conductor cross section/weight
0.08 mm² / 0.1 kg
Result of voltage-drop test
Test passed
Short circuit stability result
Test passed
Test spectrum
Service life test category 2, bogie-mounted
Test duration per axis
5 h
Test directions
X-, Y- and Z-axis (pos. and neg.)
Result of surge voltage test
Test passed
Result of flexion and pull-out test
Test passed
Short-time current
0.72 kA
Result of aging test
Test passed
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Static insulating material application in cold
-60 °C
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Height NS 35/7,5
36.5 mm
Stripping length
8 mm ... 10 mm
Conductor cross section AWG max.
10
Max. AWG conductor cross section, flexible
12
Internal cylindrical gage
A4
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 5.0
27141100
ETIM 3.0
EC000897
ETIM 6.0
EC000897
UNSPSC 11
39121410
Bending test turns
135
Result of temperature-rise test
Test passed
Ageing test for screwless modular terminal block temperature cycles
192
Acceleration
30g
Shock form
Half-sine
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
125 °C
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Height NS 35/15
44 mm
Conductor cross section solid min.
0.08 mm²
Conductor cross section flexible min.
0.08 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.14 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
1 mm²
ECLASS 4.1
27141100
Conductor cross section flexible, with ferrule with plastic sleeve max.
4 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 11.0
27141120
ECLASS 5.1
27141100
ETIM 7.0
EC000897
UNSPSC 12.01
39121410
UNSPSC 20.0
39121410