3031539 Phoenix Contact Terminal Blocks

Product Details

• Test frequency
  f1 = 5 Hz to f2 = 250 Hz
• Fire protection for rail vehicles (DIN EN 45545-2) R24
  HL 1 - HL 3
• Width
  5.2 mm
• ETIM 2.0
  EC000897
• ETIM 6.0
  EC000897
• Result of temperature-rise test
  Test passed
• Maximum load current
  26 A (in case of a 4 mm² conductor cross section, the maximum load current must not be exceeded by the total current of all connected conductors.)
• Specific optical density of smoke NFPA 130 (ASTM E 662)
  passed
• ECLASS 5.0
  27141100
• UNSPSC 18.0
  39121410
• ETIM 4.0
  EC000897
• Ambient temperature (storage/transport)
  -25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
• Bending test rotation speed
  10 rpm
• Conductor cross section tensile test
  4 mm²
• Conductor cross section short circuit testing
  4 mm²
• Surge voltage test setpoint
  7.3 kV
• Bending test conductor cross section/weight
  0.08 mm² / 0.1 kg
• Short circuit stability result
  Test passed
• Finger protection
  guaranteed
• Power frequency withstand voltage setpoint
  1.89 kV
Tractive force setpoint
60 N
Proof of thermal characteristics (needle flame) effective duration
30 s
Test directions
X-, Y- and Z-axis (pos. and neg.)
Setpoint
1 N
Oscillation, broadband noise test result
Test passed
Ageing test for screwless modular terminal block temperature cycles
192
Test spectrum
Service life test category 2, bogie-mounted
Result of surge voltage test
Test passed
Result of flexion and pull-out test
Test passed
Result of tight fit on support
Test passed
Tight fit on carrier
NS 35
Requirements, voltage drop
≤ 3.2 mV
Result of aging test
Test passed
Number of connections
4
Checking the mechanical stability of terminal points (5 x conductor connection)
Test passed
Bending test turns
135
UNSPSC 12.01
39121410
UNSPSC 20.0
39121410
Number of levels
2
Color
gray
Rated surge voltage
6 kV
Insulating material group
I
Open side panel
Yes
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Result of power-frequency withstand voltage test
Test passed
Tensile test result
Test passed
Result of voltage-drop test
Test passed
Short-time current
0.48 kA
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Shock form
Half-sine
Test duration per axis
5 h
Static insulating material application in cold
-60 °C
End cover width
2.2 mm
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Relative insulation material temperature index (Elec.; UL 746 B)
130 °C
Calorimetric heat release NFPA 130 (ASTM E 1354)
27,5 MJ/kg
Height NS 35/7,5
47.5 mm
Conductor cross section flexible max.
2.5 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.14 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 6.0
27141100
ETIM 7.0
EC000897
UNSPSC 7.0901
39121410
UNSPSC 19.0
39121410
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Length
67.5 mm
Connection method
Spring-cage connection
Conductor cross section AWG min.
28
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.14 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 4.0
27141100
ECLASS 7.0
27141120
ETIM 3.0
EC000897
UNSPSC 13.2
39121410
UNSPSC 21.0
39121410
Degree of pollution
3
ASD level
6.12 (m/s2)2/Hz
Area of application
Railway industry
Result of thermal test
Test passed
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
125 °C
Conductor cross section solid min.
0.08 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
2.5 mm²
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 4.1
27141100
UNSPSC 6.01
30211811
Maximum power dissipation for nominal condition
0.77 W (the value is multiplied when connecting multiple levels)
Nominal voltage UN
500 V
Shock test result
Test passed
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Conductor cross section flexible min.
0.08 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
2.5 mm²
Internal cylindrical gage
A3
Ambient temperature (assembly)
-5 °C ... 70 °C
Nominal cross section
2.5 mm²
Insulating material
PA
Connection in acc. with standard
CSA
Back of the hand protection
guaranteed
Surface flammability NFPA 130 (ASTM E 162)
passed
Conductor cross section solid max.
4 mm²
Stripping length
8 mm ... 10 mm
ECLASS 5.1
27141100
Overvoltage category
III
Flammability rating according to UL 94
V0
Nominal current IN
22 A (with 4 mm² conductor cross section)
Acceleration
30g
Shock duration
18 ms
Number of shocks per direction
3
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Height NS 35/15
55 mm
Conductor cross section AWG max.
12
ECLASS 10.0.1
27141120
ECLASS 9.0
27141120
UNSPSC 11
39121410
ECLASS 11.0
27141120
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
0.5 mm²