3036178 Phoenix Contact Terminal Blocks

Product Details

• Result of the test for mechanical stability of terminal points (5 x conductor connection)
  Test passed
• Setpoint
  10 N
• Result of voltage-drop test
  Test passed
• Short circuit stability result
  Test passed
• Oscillation, broadband noise test result
  Test passed
• Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
  125 °C
• Fire protection for rail vehicles (DIN EN 45545-2) R23
  HL 1 - HL 3
• Height NS 35/15
  66.5 mm
• Stripping length
  25 mm
• Conductor cross section short circuit testing
  35 mm²
• Short-time current
  4.2 kA
• Test specification, oscillation, broadband noise
  DIN EN 50155 (VDE 0115-200):2008-03
• Shock test result
  Test passed
• Specific optical density of smoke NFPA 130 (ASTM E 662)
  passed
• Shock protection test specification
  DIN EN 50274 (VDE 0660-514):2002-11
• Bending test rotation speed
  10 rpm
• Result of temperature-rise test
  Test passed
• Acceleration
  30g
• Static insulating material application in cold
  -60 °C
• Fire protection for rail vehicles (DIN EN 45545-2) R26
  HL 1 - HL 3
Bending test turns
135
Result of tight fit on support
Test passed
Result of aging test
Test passed
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Test directions
X-, Y- and Z-axis (pos. and neg.)
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
ECLASS 11.0
27141120
ECLASS 4.1
27141100
ECLASS 6.0
27141100
ETIM 2.0
EC000897
Proof of thermal characteristics (needle flame) effective duration
30 s
Ageing test for screwless modular terminal block temperature cycles
192
ASD level
6.12 (m/s2)2/Hz
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Number of shocks per direction
3
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
ECLASS 5.0
27141100
ECLASS 9.0
27141120
ETIM 4.0
EC000897
ETIM 6.0
EC000897
UNSPSC 18.0
39121410
UNSPSC 21.0
39121410
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 5.1
27141100
ETIM 3.0
EC000897
UNSPSC 11
39121410
UNSPSC 13.2
39121410
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 10.0.1
27141120
ECLASS 7.0
27141120
ETIM 7.0
EC000897
UNSPSC 12.01
39121410
UNSPSC 20.0
39121410
UNSPSC 6.01
30211811
UNSPSC 7.0901
39121410
UNSPSC 19.0
39121410
Number of connections
2
Insulating material
PA
Maximum power dissipation for nominal condition
4.06 W
Nominal current IN
125 A
Result of power-frequency withstand voltage test
Test passed
Result of flexion and pull-out test
Test passed
Bending test conductor cross section/weight
2.5 mm² / 0.7 kg
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Shock duration
18 ms
Nominal cross section
35 mm²
Degree of pollution
3
Back of the hand protection
guaranteed
Tight fit on carrier
NS 35
Tensile test result
Test passed
Result of thermal test
Test passed
Test spectrum
Service life test category 2, bogie-mounted
Test duration per axis
5 h
Shock form
Half-sine
Surface flammability NFPA 130 (ASTM E 162)
passed
Calorimetric heat release NFPA 130 (ASTM E 1354)
27,5 MJ/kg
Number of levels
1
Color
gray
Insulating material group
I
Overvoltage category
III
Result of surge voltage test
Test passed
ECLASS 4.0
27141100
Flammability rating according to UL 94
V0
Maximum load current
125 A (with 35 mm² conductor cross section)
Open side panel
No
Power frequency withstand voltage setpoint
2.2 kV
Potentials
1
Rated surge voltage
8 kV
Nominal voltage UN
1000 V
Height NS 35/7,5
59 mm
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Ambient temperature (assembly)
-5 °C ... 70 °C
Length
100 mm
Connection method
Spring-cage connection
Note
The supply from the ST 35 terminal block to the ST 16 TWIN terminal block with the RB-ST 35 reducing bridge is single-sided only.In the case of a central supply, the D-ST 16-TWIN cover cannot be bridged via the reducing bridge.
Conductor cross section AWG max.
2
Conductor cross section flexible, with ferrule without plastic sleeve min.
2.5 mm²
Max. AWG conductor cross section, flexible
2
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
2.5 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
Width
16 mm
Conductor cross section solid max.
35 mm²
Connection in acc. with standard
CSA
Conductor cross section flexible min.
2.5 mm²
Conductor cross section flexible max.
35 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
35 mm²
Internal cylindrical gage
A8
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
10 mm²
Connection
1 level
Conductor cross section AWG min.
14
Conductor cross section solid min.
2.5 mm²
Min. AWG conductor cross section, flexible
14
Conductor cross section flexible, with ferrule with plastic sleeve max.
35 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
2.5 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)