3036369 Phoenix Contact Terminal Blocks

Product Details

• Color
  black
• Rated surge voltage
  6 kV
• Connection in acc. with standard
  CSA
• Fuse type
  Glass / ceramics / ...
• Surge voltage test setpoint
  6 kV
• Result of flexion and pull-out test
  Test passed
• Result of the test for mechanical stability of terminal points (5 x conductor connection)
  Test passed
• Number of levels
  1
• Maximum power dissipation for nominal condition
  1.6 W
• Degree of pollution
  3
• Nominal voltage UN
  500 V
• Open side panel
  No
• Result of surge voltage test
  Test passed
• Result of power-frequency withstand voltage test
  Test passed
• Contact resistance
  Test passed
• Testing the rated value of the power dissipation (overload and short circuit Protection)
  Test passed
• Insulating material
  PA
• Insulating material group
  I
• Fuse
  G / 5 x 20
• Back of the hand protection
  guaranteed
Result of tight fit on support
Test passed
Bending test rotation speed
10 rpm
Result of temperature-rise test
Test passed
Test spectrum
Service life test category 2, bogie-mounted
Test directions
X-, Y- and Z-axis (pos. and neg.)
Number of shocks per direction
3
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Height NS 35/15
70 mm
Ambient temperature (actuation)
-5 °C ... 70 °C
Conductor cross section flexible min.
0.08 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.14 mm²
Connection method
Spring-cage connection
ECLASS 5.0
27141100
ECLASS 5.1
27141100
ETIM 6.0
EC000899
UNSPSC 7.0901
39121410
UNSPSC 19.0
39121410
UNSPSC 21.0
39121410
Nominal cross section
4 mm²
Rated operating voltage
250 V
Maximum power dissipation
max. 1.6 W (with single arrangement of the fuse terminal block in the event of overload)
Maximum load current
6.3 A (the current is determined by the fuse used)
Finger protection
guaranteed
Power frequency withstand voltage setpoint
1.5 kV
Bending test turns
135
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
Permissible humidity (storage/transport)
30 % ... 70 %
Conductor cross section AWG min.
28
Conductor cross section flexible, with ferrule with plastic sleeve max.
4 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
1 mm²
ECLASS 4.0
27141100
ECLASS 6.0
27141100
UNSPSC 6.01
30211811
UNSPSC 11
39121410
Number of connections
2
Flammability rating according to UL 94
V0
Overvoltage category
III
Nominal current IN
6.3 A
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Note
Swing the locking lever to its final position before replacing the fuse.
Compatibitity between modular fuse terminal block and fuse insert
Test passed
Actuatiing forces on plug in or lever in fuse insert carriers
Test passed
Bending test conductor cross section/weight
0.08 mm² / 0.1 kg
Temperature cycles
192
ASD level
6.12 (m/s2)2/Hz
Shock form
Half-sine
Static insulating material application in cold
-60 °C
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Width
6.2 mm
Conductor cross section flexible max.
4 mm²
Conductor cross section solid max.
6 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 4.1
27141100
ECLASS 9.0
27141116
ETIM 7.0
EC000899
UNSPSC 13.2
39121410
UNSPSC 20.0
39121410
Conductor cross section solid min.
0.08 mm²
Conductor cross section AWG max.
10
Internal cylindrical gage
A4
ECLASS 11.0
27141116
ETIM 3.0
EC000899
ETIM 4.0
EC000899
UNSPSC 18.0
39121410
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Length
61.5 mm
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Ambient temperature (assembly)
-5 °C ... 70 °C
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.14 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
4 mm²
Stripping length
8 mm ... 10 mm
ECLASS 10.0.1
27141116
ECLASS 7.0
27141116
ETIM 2.0
EC000897
UNSPSC 12.01
39121410
Result of aging test
Test passed
Result of thermal test
Test passed
Acceleration
30g
Test duration per axis
5 h
Shock duration
18 ms
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Testing the rated value of the power dissipation (exclusively short circuit protection)
Test passed
Shock test result
Test passed
Height NS 35/7,5
62.5 mm
Oscillation, broadband noise test result
Test passed
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3