3036385 Phoenix Contact Terminal Blocks

Product Details

• Note
  Swing the locking lever to its final position before replacing the fuse.
• Compatibitity between modular fuse terminal block and fuse insert
  Test passed
• Result of power-frequency withstand voltage test
  Test passed
• Bending test rotation speed
  10 rpm
• Temperature cycles
  192
• Test spectrum
  Service life test category 1, class B, body mounted
• Test duration per axis
  5 h
• Surge voltage test setpoint
  7.3 kV
• Contact resistance
  Test passed
• Testing the rated value of the power dissipation (exclusively short circuit protection)
  Test passed
• Result of thermal test
  Test passed
• Shock duration
  30 ms
• Test directions
  X-, Y- and Z-axis (pos. and neg.)
• Specific optical density of smoke NFPA 130 (ASTM E 662)
  passed
• Surface flammability NFPA 130 (ASTM E 162)
  passed
• Height NS 35/7,5
  69 mm
• Permissible humidity (storage/transport)
  30 % ... 70 %
• Ambient temperature (assembly)
  -5 °C ... 70 °C
• UNSPSC 6.01
  30211811
• UNSPSC 13.2
  39121410
Rated surge voltage
6 kV
Result of surge voltage test
Test passed
Actuatiing forces on plug in or lever in fuse insert carriers
Test passed
Testing the rated value of the power dissipation (overload and short circuit Protection)
Test passed
Result of temperature-rise test
Test passed
Oscillation, broadband noise test result
Test passed
Acceleration
5g
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Number of shocks per direction
3
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Ambient temperature (actuation)
-5 °C ... 70 °C
Conductor cross section AWG max.
10
ETIM 4.0
EC000899
UNSPSC 7.0901
39121410
UNSPSC 18.0
39121410
UNSPSC 19.0
39121410
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Result of aging test
Test passed
ASD level
0.964 (m/s2)2/Hz
Shock form
Half-sine
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Length
76.5 mm
Conductor cross section solid max.
6 mm²
Conductor cross section flexible max.
4 mm²
ECLASS 7.0
27141116
ETIM 2.0
EC000897
Power frequency withstand voltage setpoint
1.89 kV
Result of tight fit on support
Test passed
Bending test conductor cross section/weight
0.08 mm² / 0.1 kg
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Test frequency
f1 = 5 Hz to f2 = 150 Hz
Static insulating material application in cold
-60 °C
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Width
8.2 mm
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 5.1
27141100
ECLASS 9.0
27141116
ETIM 3.0
EC000899
UNSPSC 11
39121410
UNSPSC 21.0
39121410
Height NS 35/15
76.5 mm
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Conductor cross section solid min.
0.08 mm²
ECLASS 6.0
27141100
ETIM 6.0
EC000899
UNSPSC 12.01
39121410
ETIM 7.0
EC000899
UNSPSC 20.0
39121410
Nominal cross section
4 mm²
Maximum current with single arrangement
10 A
Open side panel
No
Finger protection
guaranteed
Stripping length
8 mm ... 10 mm
ECLASS 11.0
27141116
ECLASS 5.0
27141100
Color
black
Maximum power dissipation for nominal condition
1.6 W
Overvoltage category
III
Nominal current IN
10 A
Fuse
G / 6,3 x 32
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.14 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
4 mm²
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
Number of levels
1
Flammability rating according to UL 94
V0
Insulating material group
I
Maximum load current
10 A (the current is determined by the fuse used)
Back of the hand protection
guaranteed
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Conductor cross section flexible min.
0.08 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.14 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
1 mm²
ECLASS 4.1
27141100
Insulating material
PA
Maximum power dissipation
max. 1.6 W (with single arrangement of the fuse terminal block in the event of overload)
Nominal voltage UN
400 V
Fuse type
Glass / ceramics / ...
Bending test turns
135
Conductor cross section flexible, with ferrule with plastic sleeve max.
4 mm²
Connection method
Spring-cage connection
ECLASS 4.0
27141100
Number of connections
2
Degree of pollution
3
Connection in acc. with standard
CSA
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Result of flexion and pull-out test
Test passed
Shock test result
Test passed
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Conductor cross section AWG min.
28
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Internal cylindrical gage
A4
ECLASS 10.0.1
27141116