3037805 Phoenix Contact Terminal Blocks

Product Details

• Result of surge voltage test
  Test passed
• Color
  gray
• Overvoltage category
  III
• Insulating material group
  I
• Open side panel
  Yes
• Result of flexion and pull-out test
  Test passed
• Result of tight fit on support
  Test passed
• Tight fit on carrier
  NS 35
• Result of temperature-rise test
  Test passed
• Proof of thermal characteristics (needle flame) effective duration
  30 s
• Test frequency
  f1 = 5 Hz to f2 = 250 Hz
• Acceleration
  30g
• Relative insulation material temperature index (Elec.; UL 746 B)
  130 °C
• Calorimetric heat release NFPA 130 (ASTM E 1354)
  27,5 MJ/kg
• Fire protection for rail vehicles (DIN EN 45545-2) R23
  HL 1 - HL 3
• Fire protection for rail vehicles (DIN EN 45545-2) R22
  HL 1 - HL 3
• Conductor cross section solid min.
  0.08 mm²
• Conductor cross section AWG max.
  12
• Nominal cross section
  2.5 mm²
• Flammability rating according to UL 94
  V0
Connection in acc. with standard
IEC 60947-7-1
Nominal voltage UN
500 V
Finger protection
guaranteed
Result of power-frequency withstand voltage test
Test passed
Bending test turns
135
Number of connections
4
Insulating material
PA
Degree of pollution
3
Nominal current IN
22 A
Maximum load current
26 A (with 4 mm² conductor cross section)
Back of the hand protection
guaranteed
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 10.0.1
27141120
ECLASS 6.0
27141100
ECLASS 7.0
27141120
ETIM 7.0
EC000897
UNSPSC 6.01
30211811
UNSPSC 19.0
39121410
Number of levels
2
Rated surge voltage
6 kV
Maximum power dissipation for nominal condition
0.77 W (the value is multiplied when connecting multiple levels)
Shock protection test specification
IEC 60529:2001-02
Power frequency withstand voltage setpoint
1.89 kV
Bending test rotation speed
10 rpm
Bending test conductor cross section/weight
0.2 mm² / 0.2 kg
Setpoint
1 N
Ageing test for screwless modular terminal block temperature cycles
192
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2018-05
Test directions
X-, Y- and Z-axis (pos. and neg.)
Shock form
Half-sine
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
125 °C
Surface flammability NFPA 130 (ASTM E 162)
passed
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Length
78 mm
Height NS 35/7,5
55 mm
Connection method
Spring-cage connection
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.14 mm²
Stripping length
10 mm
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 4.0
27141100
ETIM 2.0
EC000897
UNSPSC 13.2
39121410
Checking the mechanical stability of terminal points (5 x conductor connection)
Test passed
Conductor cross section short circuit testing
2.5 mm²
Result of aging test
Test passed
Test spectrum
Service life test category 2, bogie-mounted
ASD level
6.12 (m/s2)2/Hz
Shock duration
18 ms
Static insulating material application in cold
-60 °C
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Width
5.2 mm
Height NS 35/15
62.5 mm
Conductor cross section flexible max.
2.5 mm²
Conductor cross section flexible min.
0.08 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
0.5 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
ECLASS 11.0
27141120
ECLASS 9.0
27141120
ETIM 6.0
EC000897
UNSPSC 12.01
39121410
UNSPSC 21.0
39121410
Short circuit stability result
Test passed
Short-time current
0.3 kA
Result of thermal test
Test passed
Test duration per axis
5 h
Number of shocks per direction
3
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
End cover width
2.2 mm
Conductor cross section solid max.
4 mm²
Conductor cross section AWG min.
28
Conductor cross section flexible, with ferrule without plastic sleeve max.
2.5 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 5.0
27141100
ETIM 3.0
EC000897
UNSPSC 7.0901
39121410
UNSPSC 18.0
39121410
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.14 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
2.5 mm²
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 4.1
27141100
ECLASS 5.1
27141100
ETIM 4.0
EC000897
UNSPSC 11
39121410
UNSPSC 20.0
39121410