3045088 Phoenix Contact Terminal Blocks

Product Details

• Surface flammability NFPA 130 (ASTM E 162)
  passed
• Number of levels
  1
• Insulating material
  PA
• Maximum power dissipation for nominal condition
  0.77 W
• Nominal voltage UN
  1000 V
• Open side panel
  Yes
• Result of the test for mechanical stability of terminal points (5 x conductor connection)
  Test passed
• Power frequency withstand voltage setpoint
  2.2 kV
• Tight fit on carrier
  NS 35
• Requirement temperature-rise test
  Increase in temperature ≤ 45 K
• Result of thermal test
  Test passed
• Conductor cross section short circuit testing
  4 mm²
• Operating temperature
  -60 °C ... 105 °C (max. short-term operating temperature 130°C)
• Ambient temperature (actuation)
  -5 °C ... 70 °C
• ECLASS 4.1
  27141100
• ETIM 7.0
  EC000897
• Connection in acc. with standard
  CSA
• Conductor cross section flexible min.
  0.14 mm²
• Conductor cross section flexible, with ferrule without plastic sleeve max.
  2.5 mm²
• Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
  1.5 mm²
UNSPSC 7.0901
39121410
UNSPSC 11
39121410
Nominal cross section
2.5 mm²
Flammability rating according to UL 94
V0
Maximum load current
32 A (with 4 mm² conductor cross section)
Nominal current IN
24 A
Bending test turns
135
Conductor cross section solid min.
0.14 mm²
ECLASS 5.1
27141100
ETIM 4.0
EC000897
UNSPSC 13.2
39121410
UNSPSC 21.0
39121410
Conductor cross section flexible, with ferrule with plastic sleeve max.
2.5 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
China RoHS
Environmentally Friendly Use Period = 50 years
Color
black
Rated surge voltage
8 kV
Back of the hand protection
guaranteed
Result of flexion and pull-out test
Test passed
Result of voltage-drop test
Test passed
Max. AWG conductor cross section, flexible
12
Conductor cross section AWG max.
12
ETIM 6.0
EC000897
UNSPSC 20.0
39121410
Shock form
Half-sine
Conductor cross section AWG min.
26
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.14 mm²
2 conductors with same cross section, solid max.
1.5 mm²
Potentials
1
Area of application
Railway industry
Degree of pollution
3
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Finger protection
guaranteed
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum
1.5 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 10.0.1
27141120
ECLASS 6.0
27141100
ETIM 3.0
EC000897
Number of connections
2
Note
Note: Product releases, connection cross sections and notes on connecting aluminum cables can be found in the download area.
Conductor cross section solid max.
4 mm²
Min. AWG conductor cross section, flexible
26
2 conductors with same cross section, stranded min.
0.14 mm²
2 conductors with same cross section, solid min.
0.14 mm²
Internal cylindrical gage
A3
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 4.0
27141100
ECLASS 5.0
27141100
ECLASS 9.0
27141120
UNSPSC 19.0
39121410
Conductor cross section flexible max.
2.5 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.14 mm²
2 conductors with same cross section, stranded max.
1.5 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum
0.14 mm²
ECLASS 11.0
27141120
ECLASS 7.0
27141120
ETIM 2.0
EC000897
UNSPSC 6.01
30211811
UNSPSC 18.0
39121410
Insulating material group
I
Bending test rotation speed
10 rpm
Bending test conductor cross section/weight
0.14 mm² / 0.2 kg
Test frequency
f1 = 5 Hz to f2 = 150 Hz
Test spectrum
Service life test category 1, class B, body mounted
Acceleration
5g
Shock duration
30 ms
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Height NS 35/15
55 mm
End cover width
2.2 mm
Tightening torque max
0.6 Nm
Short circuit stability result
Test passed
Oscillation, broadband noise test result
Test passed
Shock test result
Test passed
Test duration per axis
5 h
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Connection method
Screw connection
Stripping length
9 mm
Overvoltage category
III
Result of power-frequency withstand voltage test
Test passed
Tensile test result
Test passed
Short-time current
0.48 kA
ASD level
1.857 (m/s2)2/Hz
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Length
47.7 mm
Tightening torque, min
0.5 Nm
UNSPSC 12.01
39121410
Result of surge voltage test
Test passed
Result of tight fit on support
Test passed
Setpoint
1 N
Result of temperature-rise test
Test passed
Proof of thermal characteristics (needle flame) effective duration
30 s
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Test directions
X-, Y- and Z-axis (pos. and neg.)
Number of shocks per direction
3
Static insulating material application in cold
-60 °C
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Width
5.2 mm
Height NS 35/7,5
47.5 mm
Screw thread
M3